[66803.960223] xfer 31 bytes
[66803.960241] Status code 0; transferred 31/31
[66803.960244] -- transfer complete
[66803.960246] Bulk command transfer result=0
[66803.960248] xfer 96 bytes, 1 entries
[66803.960387] Status code -121; transferred 18/96
[66803.960391] -- short read transfer
[66803.960393] Bulk data transfer result 0x1
[66803.960395] Attempting to get CSW...
[66803.960397] xfer 13 bytes
[66803.960508] Status code -32; transferred 0/13
[66803.960512] clearing endpoint halt for pipe 0xc0008380
[66803.960515] rq=01 rqtype=02 value=0000 index=81 len=0
[66803.960876] result = 0
[66803.960882] Attempting to get CSW (2nd try)...
[66803.960884] xfer 13 bytes
[66803.960919] Status code 0; transferred 13/13
[66803.960923] -- transfer complete
[66803.960925] Bulk status result = 0
[66803.960928] Bulk Status S 0x53425355 T 0x3fbc0 R 78 Stat 0x0
[66803.960934] -- Result from auto-sense is 0
[66803.960936] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66803.960941] Not Ready: Medium not present
[66803.960946] scsi cmd done, result=0x2
[66803.960953] *** thread sleeping
[66803.961045] *** thread awakened
[66803.961047] Command TEST_UNIT_READY (6 bytes)
[66803.961053] bytes: 00 00 00 00 00 00
[66803.961057] Bulk Command S 0x43425355 T 0x3fbc1 L 0 F 0 Trg 0 LUN 3 CL 6
[66803.961063] xfer 31 bytes
[66803.961089] Status code 0; transferred 31/31
[66803.961092] -- transfer complete
[66803.961094] Bulk command transfer result=0
[66803.961096] Attempting to get CSW...
[66803.961098] xfer 13 bytes
[66803.961324] Status code 0; transferred 13/13
[66803.961329] -- transfer complete
[66803.961331] Bulk status result = 0
[66803.961333] Bulk Status S 0x53425355 T 0x3fbc1 R 0 Stat 0x1
[66803.961337] -- transport indicates command failure
[66803.961340] Issuing auto-REQUEST_SENSE
[66803.961342] Bulk Command S 0x43425355 T 0x3fbc2 L 96 F 128 Trg 0 LUN 3 CL 6
[66803.961347] xfer 31 bytes
[66803.961371] Status code 0; transferred 31/31
[66803.961374] -- transfer complete
[66803.961376] Bulk command transfer result=0
[66803.961379] xfer 96 bytes, 1 entries
[66803.961554] Status code -121; transferred 18/96
[66803.961571] -- short read transfer
[66803.961573] Bulk data transfer result 0x1
[66803.961577] Attempting to get CSW...
[66803.961579] xfer 13 bytes
[66803.961714] Status code -32; transferred 0/13
[66803.961721] clearing endpoint halt for pipe 0xc0008380
[66803.961724] rq=01 rqtype=02 value=0000 index=81 len=0
[66803.962147] result = 0
[66803.962153] Attempting to get CSW (2nd try)...
[66803.962155] xfer 13 bytes
[66803.962191] Status code 0; transferred 13/13
[66803.962195] -- transfer complete
[66803.962199] Bulk status result = 0
[66803.962201] Bulk Status S 0x53425355 T 0x3fbc2 R 78 Stat 0x0
[66803.962207] -- Result from auto-sense is 0
[66803.962209] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66803.962215] Not Ready: Medium not present
[66803.962219] scsi cmd done, result=0x2
[66803.962224] *** thread sleeping
[66805.943780] *** thread awakened
[66805.943787] Command TEST_UNIT_READY (6 bytes)
[66805.943792] bytes: 00 00 00 00 00 00
[66805.943797] Bulk Command S 0x43425355 T 0x3fbc3 L 0 F 0 Trg 0 LUN 0 CL 6
[66805.943803] xfer 31 bytes
[66805.943841] Status code 0; transferred 31/31
[66805.943845] -- transfer complete
[66805.943847] Bulk command transfer result=0
[66805.943850] Attempting to get CSW...
[66805.943852] xfer 13 bytes
[66805.943932] Status code 0; transferred 13/13
[66805.943935] -- transfer complete
[66805.943937] Bulk status result = 0
[66805.943939] Bulk Status S 0x53425355 T 0x3fbc3 R 0 Stat 0x1
[66805.943944] -- transport indicates command failure
[66805.943946] Issuing auto-REQUEST_SENSE
[66805.943949] Bulk Command S 0x43425355 T 0x3fbc4 L 96 F 128 Trg 0 LUN 0 CL 6
[66805.943955] xfer 31 bytes
[66805.943972] Status code 0; transferred 31/31
[66805.943975] -- transfer complete
[66805.943977] Bulk command transfer result=0
[66805.943980] xfer 96 bytes, 1 entries
[66805.944096] Status code -121; transferred 18/96
[66805.944100] -- short read transfer
[66805.944102] Bulk data transfer result 0x1
[66805.944104] Attempting to get CSW...
[66805.944106] xfer 13 bytes
[66805.944214] Status code -32; transferred 0/13
[66805.944218] clearing endpoint halt for pipe 0xc0008380
[66805.944220] rq=01 rqtype=02 value=0000 index=81 len=0
[66805.944517] result = 0
[66805.944519] Attempting to get CSW (2nd try)...
[66805.944521] xfer 13 bytes
[66805.944555] Status code 0; transferred 13/13
[66805.944558] -- transfer complete
[66805.944584] Bulk status result = 0
[66805.944586] Bulk Status S 0x53425355 T 0x3fbc4 R 78 Stat 0x0
[66805.944591] -- Result from auto-sense is 0
[66805.944593] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66805.944599] Not Ready: Medium not present
[66805.944603] scsi cmd done, result=0x2
[66805.944609] *** thread sleeping
[66805.944651] *** thread awakened
[66805.944654] Command TEST_UNIT_READY (6 bytes)
[66805.944657] bytes: 00 00 00 00 00 00
[66805.944661] Bulk Command S 0x43425355 T 0x3fbc5 L 0 F 0 Trg 0 LUN 2 CL 6
[66805.944666] xfer 31 bytes
[66805.944686] Status code 0; transferred 31/31
[66805.944689] -- transfer complete
[66805.944691] Bulk command transfer result=0
[66805.944693] Attempting to get CSW...
[66805.944695] xfer 13 bytes
[66805.944906] Status code 0; transferred 13/13
[66805.944908] -- transfer complete
[66805.944910] Bulk status result = 0
[66805.944912] Bulk Status S 0x53425355 T 0x3fbc5 R 0 Stat 0x1
[66805.944916] -- transport indicates command failure
[66805.944918] Issuing auto-REQUEST_SENSE
[66805.944921] Bulk Command S 0x43425355 T 0x3fbc6 L 96 F 128 Trg 0 LUN 2 CL 6
[66805.944926] xfer 31 bytes
[66805.944945] Status code 0; transferred 31/31
[66805.944948] -- transfer complete
[66805.944950] Bulk command transfer result=0
[66805.944953] xfer 96 bytes, 1 entries
[66805.945097] Status code -121; transferred 18/96
[66805.945100] -- short read transfer
[66805.945102] Bulk data transfer result 0x1
[66805.945104] Attempting to get CSW...
[66805.945106] xfer 13 bytes
[66805.945225] Status code -32; transferred 0/13
[66805.945228] clearing endpoint halt for pipe 0xc0008380
[66805.945231] rq=01 rqtype=02 value=0000 index=81 len=0
[66805.945531] result = 0
[66805.945533] Attempting to get CSW (2nd try)...
[66805.945537] xfer 13 bytes
[66805.945575] Status code 0; transferred 13/13
[66805.945579] -- transfer complete
[66805.945581] Bulk status result = 0
[66805.945583] Bulk Status S 0x53425355 T 0x3fbc6 R 78 Stat 0x0
[66805.945587] -- Result from auto-sense is 0
[66805.945589] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66805.945593] Not Ready: Medium not present
[66805.945597] scsi cmd done, result=0x2
[66805.945601] *** thread sleeping
[66806.007782] *** thread awakened
[66806.007789] Command TEST_UNIT_READY (6 bytes)
[66806.007793] bytes: 00 00 00 00 00 00
[66806.007798] Bulk Command S 0x43425355 T 0x3fbc7 L 0 F 0 Trg 0 LUN 1 CL 6
[66806.007805] xfer 31 bytes
[66806.007839] Status code 0; transferred 31/31
[66806.007843] -- transfer complete
[66806.007845] Bulk command transfer result=0
[66806.007847] Attempting to get CSW...
[66806.007849] xfer 13 bytes
[66806.008223] Status code 0; transferred 13/13
[66806.008226] -- transfer complete
[66806.008228] Bulk status result = 0
[66806.008231] Bulk Status S 0x53425355 T 0x3fbc7 R 0 Stat 0x1
[66806.008235] -- transport indicates command failure
[66806.008237] Issuing auto-REQUEST_SENSE
[66806.008240] Bulk Command S 0x43425355 T 0x3fbc8 L 96 F 128 Trg 0 LUN 1 CL 6
[66806.008245] xfer 31 bytes
[66806.008263] Status code 0; transferred 31/31
[66806.008266] -- transfer complete
[66806.008268] Bulk command transfer result=0
[66806.008270] xfer 96 bytes, 1 entries
[66806.008408] Status code -121; transferred 18/96
[66806.008412] -- short read transfer
[66806.008414] Bulk data transfer result 0x1
[66806.008416] Attempting to get CSW...
[66806.008418] xfer 13 bytes
[66806.008527] Status code -32; transferred 0/13
[66806.008531] clearing endpoint halt for pipe 0xc0008380
[66806.008533] rq=01 rqtype=02 value=0000 index=81 len=0
[66806.008894] result = 0
[66806.008900] Attempting to get CSW (2nd try)...
[66806.008902] xfer 13 bytes
[66806.008937] Status code 0; transferred 13/13
[66806.008941] -- transfer complete
[66806.008943] Bulk status result = 0
[66806.008946] Bulk Status S 0x53425355 T 0x3fbc8 R 78 Stat 0x0
[66806.008951] -- Result from auto-sense is 0
[66806.008954] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66806.008959] Not Ready: Medium not present
[66806.008964] scsi cmd done, result=0x2
[66806.008970] *** thread sleeping
[66806.009064] *** thread awakened
[66806.009067] Command TEST_UNIT_READY (6 bytes)
[66806.009071] bytes: 00 00 00 00 00 00
[66806.009075] Bulk Command S 0x43425355 T 0x3fbc9 L 0 F 0 Trg 0 LUN 3 CL 6
[66806.009081] xfer 31 bytes
[66806.009107] Status code 0; transferred 31/31
[66806.009110] -- transfer complete
[66806.009112] Bulk command transfer result=0
[66806.009115] Attempting to get CSW...
[66806.009116] xfer 13 bytes
[66806.009344] Status code 0; transferred 13/13
[66806.009347] -- transfer complete
[66806.009349] Bulk status result = 0
[66806.009351] Bulk Status S 0x53425355 T 0x3fbc9 R 0 Stat 0x1
[66806.009355] -- transport indicates command failure
[66806.009360] Issuing auto-REQUEST_SENSE
[66806.009362] Bulk Command S 0x43425355 T 0x3fbca L 96 F 128 Trg 0 LUN 3 CL 6
[66806.009368] xfer 31 bytes
[66806.009392] Status code 0; transferred 31/31
[66806.009395] -- transfer complete
[66806.009397] Bulk command transfer result=0
[66806.009399] xfer 96 bytes, 1 entries
[66806.009638] Status code -121; transferred 18/96
[66806.009646] -- short read transfer
[66806.009648] Bulk data transfer result 0x1
[66806.009653] Attempting to get CSW...
[66806.009654] xfer 13 bytes
[66806.009771] Status code -32; transferred 0/13
[66806.009779] clearing endpoint halt for pipe 0xc0008380
[66806.009783] rq=01 rqtype=02 value=0000 index=81 len=0
[66806.010143] result = 0
[66806.010149] Attempting to get CSW (2nd try)...
[66806.010151] xfer 13 bytes
[66806.010186] Status code 0; transferred 13/13
[66806.010191] -- transfer complete
[66806.010193] Bulk status result = 0
[66806.010197] Bulk Status S 0x53425355 T 0x3fbca R 78 Stat 0x0
[66806.010203] -- Result from auto-sense is 0
[66806.010205] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66806.010211] Not Ready: Medium not present
[66806.010215] scsi cmd done, result=0x2
[66806.010220] *** thread sleeping
[66807.991823] *** thread awakened
[66807.991830] Command TEST_UNIT_READY (6 bytes)
[66807.991835] bytes: 00 00 00 00 00 00
[66807.991839] Bulk Command S 0x43425355 T 0x3fbcb L 0 F 0 Trg 0 LUN 2 CL 6
[66807.991846] xfer 31 bytes
[66807.991882] Status code 0; transferred 31/31
[66807.991886] -- transfer complete
[66807.991888] Bulk command transfer result=0
[66807.991890] Attempting to get CSW...
[66807.991892] xfer 13 bytes
[66807.992099] Status code 0; transferred 13/13
[66807.992102] -- transfer complete
[66807.992104] Bulk status result = 0
[66807.992106] Bulk Status S 0x53425355 T 0x3fbcb R 0 Stat 0x1
[66807.992111] -- transport indicates command failure
[66807.992113] Issuing auto-REQUEST_SENSE
[66807.992116] Bulk Command S 0x43425355 T 0x3fbcc L 96 F 128 Trg 0 LUN 2 CL 6
[66807.992121] xfer 31 bytes
[66807.992138] Status code 0; transferred 31/31
[66807.992141] -- transfer complete
[66807.992143] Bulk command transfer result=0
[66807.992146] xfer 96 bytes, 1 entries
[66807.992304] Status code -121; transferred 18/96
[66807.992308] -- short read transfer
[66807.992310] Bulk data transfer result 0x1
[66807.992312] Attempting to get CSW...
[66807.992314] xfer 13 bytes
[66807.992423] Status code -32; transferred 0/13
[66807.992426] clearing endpoint halt for pipe 0xc0008380
[66807.992429] rq=01 rqtype=02 value=0000 index=81 len=0
[66807.992805] result = 0
[66807.992811] Attempting to get CSW (2nd try)...
[66807.992813] xfer 13 bytes
[66807.992849] Status code 0; transferred 13/13
[66807.992853] -- transfer complete
[66807.992855] Bulk status result = 0
[66807.992857] Bulk Status S 0x53425355 T 0x3fbcc R 78 Stat 0x0
[66807.992863] -- Result from auto-sense is 0
[66807.992866] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66807.992871] Not Ready: Medium not present
[66807.992876] scsi cmd done, result=0x2
[66807.992881] *** thread sleeping
[66807.992927] *** thread awakened
[66807.992930] Command TEST_UNIT_READY (6 bytes)
[66807.992934] bytes: 00 00 00 00 00 00
[66807.992938] Bulk Command S 0x43425355 T 0x3fbcd L 0 F 0 Trg 0 LUN 0 CL 6
[66807.992944] xfer 31 bytes
[66807.992971] Status code 0; transferred 31/31
[66807.992975] -- transfer complete
[66807.992977] Bulk command transfer result=0
[66807.992979] Attempting to get CSW...
[66807.992981] xfer 13 bytes
[66807.993093] Status code 0; transferred 13/13
[66807.993096] -- transfer complete
[66807.993098] Bulk status result = 0
[66807.993100] Bulk Status S 0x53425355 T 0x3fbcd R 0 Stat 0x1
[66807.993105] -- transport indicates command failure
[66807.993107] Issuing auto-REQUEST_SENSE
[66807.993109] Bulk Command S 0x43425355 T 0x3fbce L 96 F 128 Trg 0 LUN 0 CL 6
[66807.993115] xfer 31 bytes
[66807.993138] Status code 0; transferred 31/31
[66807.993141] -- transfer complete
[66807.993143] Bulk command transfer result=0
[66807.993145] xfer 96 bytes, 1 entries
[66807.993324] Status code -121; transferred 18/96
[66807.993331] -- short read transfer
[66807.993334] Bulk data transfer result 0x1
[66807.993338] Attempting to get CSW...
[66807.993341] xfer 13 bytes
[66807.993457] Status code -32; transferred 0/13
[66807.993465] clearing endpoint halt for pipe 0xc0008380
[66807.993469] rq=01 rqtype=02 value=0000 index=81 len=0
[66807.993828] result = 0
[66807.993834] Attempting to get CSW (2nd try)...
[66807.993837] xfer 13 bytes
[66807.993872] Status code 0; transferred 13/13
[66807.993876] -- transfer complete
[66807.993878] Bulk status result = 0
[66807.993880] Bulk Status S 0x53425355 T 0x3fbce R 78 Stat 0x0
[66807.993886] -- Result from auto-sense is 0
[66807.993888] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66807.993894] Not Ready: Medium not present
[66807.993900] scsi cmd done, result=0x2
[66807.993906] *** thread sleeping
[66808.055769] *** thread awakened
[66808.055775] Command TEST_UNIT_READY (6 bytes)
[66808.055780] bytes: 00 00 00 00 00 00
[66808.055784] Bulk Command S 0x43425355 T 0x3fbcf L 0 F 0 Trg 0 LUN 1 CL 6
[66808.055791] xfer 31 bytes
[66808.055825] Status code 0; transferred 31/31
[66808.055829] -- transfer complete
[66808.055831] Bulk command transfer result=0
[66808.055833] Attempting to get CSW...
[66808.055835] xfer 13 bytes
[66808.056179] Status code 0; transferred 13/13
[66808.056182] -- transfer complete
[66808.056184] Bulk status result = 0
[66808.056186] Bulk Status S 0x53425355 T 0x3fbcf R 0 Stat 0x1
[66808.056191] -- transport indicates command failure
[66808.056193] Issuing auto-REQUEST_SENSE
[66808.056196] Bulk Command S 0x43425355 T 0x3fbd0 L 96 F 128 Trg 0 LUN 1 CL 6
[66808.056201] xfer 31 bytes
[66808.056219] Status code 0; transferred 31/31
[66808.056222] -- transfer complete
[66808.056224] Bulk command transfer result=0
[66808.056226] xfer 96 bytes, 1 entries
[66808.056345] Status code -121; transferred 18/96
[66808.056349] -- short read transfer
[66808.056351] Bulk data transfer result 0x1
[66808.056353] Attempting to get CSW...
[66808.056355] xfer 13 bytes
[66808.056464] Status code -32; transferred 0/13
[66808.056467] clearing endpoint halt for pipe 0xc0008380
[66808.056470] rq=01 rqtype=02 value=0000 index=81 len=0
[66808.056845] result = 0
[66808.056851] Attempting to get CSW (2nd try)...
[66808.056854] xfer 13 bytes
[66808.056890] Status code 0; transferred 13/13
[66808.056894] -- transfer complete
[66808.056896] Bulk status result = 0
[66808.056898] Bulk Status S 0x53425355 T 0x3fbd0 R 78 Stat 0x0
[66808.056904] -- Result from auto-sense is 0
[66808.056907] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66808.056912] Not Ready: Medium not present
[66808.056917] scsi cmd done, result=0x2
[66808.056923] *** thread sleeping
[66808.057011] *** thread awakened
[66808.057017] Command TEST_UNIT_READY (6 bytes)
[66808.057021] bytes: 00 00 00 00 00 00
[66808.057026] Bulk Command S 0x43425355 T 0x3fbd1 L 0 F 0 Trg 0 LUN 3 CL 6
[66808.057032] xfer 31 bytes
[66808.057059] Status code 0; transferred 31/31
[66808.057063] -- transfer complete
[66808.057065] Bulk command transfer result=0
[66808.057067] Attempting to get CSW...
[66808.057071] xfer 13 bytes
[66808.057344] Status code 0; transferred 13/13
[66808.057351] -- transfer complete
[66808.057354] Bulk status result = 0
[66808.057356] Bulk Status S 0x53425355 T 0x3fbd1 R 0 Stat 0x1
[66808.057361] -- transport indicates command failure
[66808.057364] Issuing auto-REQUEST_SENSE
[66808.057366] Bulk Command S 0x43425355 T 0x3fbd2 L 96 F 128 Trg 0 LUN 3 CL 6
[66808.057372] xfer 31 bytes
[66808.057391] Status code 0; transferred 31/31
[66808.057395] -- transfer complete
[66808.057397] Bulk command transfer result=0
[66808.057399] xfer 96 bytes, 1 entries
[66808.057575] Status code -121; transferred 18/96
[66808.057582] -- short read transfer
[66808.057584] Bulk data transfer result 0x1
[66808.057587] Attempting to get CSW...
[66808.057589] xfer 13 bytes
[66808.057708] Status code -32; transferred 0/13
[66808.057715] clearing endpoint halt for pipe 0xc0008380
[66808.057719] rq=01 rqtype=02 value=0000 index=81 len=0
[66808.058079] result = 0
[66808.058085] Attempting to get CSW (2nd try)...
[66808.058089] xfer 13 bytes
[66808.058125] Status code 0; transferred 13/13
[66808.058129] -- transfer complete
[66808.058131] Bulk status result = 0
[66808.058133] Bulk Status S 0x53425355 T 0x3fbd2 R 78 Stat 0x0
[66808.058141] -- Result from auto-sense is 0
[66808.058143] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66808.058148] Not Ready: Medium not present
[66808.058152] scsi cmd done, result=0x2
[66808.058158] *** thread sleeping
[66810.039782] *** thread awakened
[66810.039788] Command TEST_UNIT_READY (6 bytes)
[66810.039793] bytes: 00 00 00 00 00 00
[66810.039797] Bulk Command S 0x43425355 T 0x3fbd3 L 0 F 0 Trg 0 LUN 0 CL 6
[66810.039804] xfer 31 bytes
[66810.039842] Status code 0; transferred 31/31
[66810.039846] -- transfer complete
[66810.039848] Bulk command transfer result=0
[66810.039851] Attempting to get CSW...
[66810.039853] xfer 13 bytes
[66810.039927] Status code 0; transferred 13/13
[66810.039930] -- transfer complete
[66810.039932] Bulk status result = 0
[66810.039934] Bulk Status S 0x53425355 T 0x3fbd3 R 0 Stat 0x1
[66810.039939] -- transport indicates command failure
[66810.039941] Issuing auto-REQUEST_SENSE
[66810.039944] Bulk Command S 0x43425355 T 0x3fbd4 L 96 F 128 Trg 0 LUN 0 CL 6
[66810.039950] xfer 31 bytes
[66810.039968] Status code 0; transferred 31/31
[66810.039971] -- transfer complete
[66810.039972] Bulk command transfer result=0
[66810.039975] xfer 96 bytes, 1 entries
[66810.040095] Status code -121; transferred 18/96
[66810.040099] -- short read transfer
[66810.040101] Bulk data transfer result 0x1
[66810.040103] Attempting to get CSW...
[66810.040105] xfer 13 bytes
[66810.040214] Status code -32; transferred 0/13
[66810.040218] clearing endpoint halt for pipe 0xc0008380
[66810.040221] rq=01 rqtype=02 value=0000 index=81 len=0
[66810.040517] result = 0
[66810.040519] Attempting to get CSW (2nd try)...
[66810.040521] xfer 13 bytes
[66810.040555] Status code 0; transferred 13/13
[66810.040558] -- transfer complete
[66810.040585] Bulk status result = 0
[66810.040587] Bulk Status S 0x53425355 T 0x3fbd4 R 78 Stat 0x0
[66810.040592] -- Result from auto-sense is 0
[66810.040594] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66810.040600] Not Ready: Medium not present
[66810.040604] scsi cmd done, result=0x2
[66810.040610] *** thread sleeping
[66810.040653] *** thread awakened
[66810.040656] Command TEST_UNIT_READY (6 bytes)
[66810.040659] bytes: 00 00 00 00 00 00
[66810.040662] Bulk Command S 0x43425355 T 0x3fbd5 L 0 F 0 Trg 0 LUN 2 CL 6
[66810.040668] xfer 31 bytes
[66810.040688] Status code 0; transferred 31/31
[66810.040690] -- transfer complete
[66810.040692] Bulk command transfer result=0
[66810.040694] Attempting to get CSW...
[66810.040696] xfer 13 bytes
[66810.040906] Status code 0; transferred 13/13
[66810.040909] -- transfer complete
[66810.040911] Bulk status result = 0
[66810.040913] Bulk Status S 0x53425355 T 0x3fbd5 R 0 Stat 0x1
[66810.040917] -- transport indicates command failure
[66810.040919] Issuing auto-REQUEST_SENSE
[66810.040921] Bulk Command S 0x43425355 T 0x3fbd6 L 96 F 128 Trg 0 LUN 2 CL 6
[66810.040926] xfer 31 bytes
[66810.040945] Status code 0; transferred 31/31
[66810.040948] -- transfer complete
[66810.040950] Bulk command transfer result=0
[66810.040952] xfer 96 bytes, 1 entries
[66810.041118] Status code -121; transferred 18/96
[66810.041121] -- short read transfer
[66810.041123] Bulk data transfer result 0x1
[66810.041125] Attempting to get CSW...
[66810.041127] xfer 13 bytes
[66810.041237] Status code -32; transferred 0/13
[66810.041240] clearing endpoint halt for pipe 0xc0008380
[66810.041243] rq=01 rqtype=02 value=0000 index=81 len=0
[66810.041558] result = 0
[66810.041562] Attempting to get CSW (2nd try)...
[66810.041564] xfer 13 bytes
[66810.041607] Status code 0; transferred 13/13
[66810.041610] -- transfer complete
[66810.041612] Bulk status result = 0
[66810.041614] Bulk Status S 0x53425355 T 0x3fbd6 R 78 Stat 0x0
[66810.041618] -- Result from auto-sense is 0
[66810.041620] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66810.041624] Not Ready: Medium not present
[66810.041627] scsi cmd done, result=0x2
[66810.041631] *** thread sleeping
[66810.103668] *** thread awakened
[66810.103675] Command TEST_UNIT_READY (6 bytes)
[66810.103679] bytes: 00 00 00 00 00 00
[66810.103684] Bulk Command S 0x43425355 T 0x3fbd7 L 0 F 0 Trg 0 LUN 1 CL 6
[66810.103691] xfer 31 bytes
[66810.103725] Status code 0; transferred 31/31
[66810.103729] -- transfer complete
[66810.103731] Bulk command transfer result=0
[66810.103733] Attempting to get CSW...
[66810.103735] xfer 13 bytes
[66810.104096] Status code 0; transferred 13/13
[66810.104099] -- transfer complete
[66810.104101] Bulk status result = 0
[66810.104103] Bulk Status S 0x53425355 T 0x3fbd7 R 0 Stat 0x1
[66810.104108] -- transport indicates command failure
[66810.104110] Issuing auto-REQUEST_SENSE
[66810.104113] Bulk Command S 0x43425355 T 0x3fbd8 L 96 F 128 Trg 0 LUN 1 CL 6
[66810.104119] xfer 31 bytes
[66810.104136] Status code 0; transferred 31/31
[66810.104139] -- transfer complete
[66810.104141] Bulk command transfer result=0
[66810.104144] xfer 96 bytes, 1 entries
[66810.104283] Status code -121; transferred 18/96
[66810.104287] -- short read transfer
[66810.104289] Bulk data transfer result 0x1
[66810.104291] Attempting to get CSW...
[66810.104293] xfer 13 bytes
[66810.104402] Status code -32; transferred 0/13
[66810.104406] clearing endpoint halt for pipe 0xc0008380
[66810.104408] rq=01 rqtype=02 value=0000 index=81 len=0
[66810.104770] result = 0
[66810.104776] Attempting to get CSW (2nd try)...
[66810.104778] xfer 13 bytes
[66810.104813] Status code 0; transferred 13/13
[66810.104817] -- transfer complete
[66810.104819] Bulk status result = 0
[66810.104822] Bulk Status S 0x53425355 T 0x3fbd8 R 78 Stat 0x0
[66810.104828] -- Result from auto-sense is 0
[66810.104830] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66810.104836] Not Ready: Medium not present
[66810.104840] scsi cmd done, result=0x2
[66810.104846] *** thread sleeping
[66810.104965] *** thread awakened
[66810.104971] Command TEST_UNIT_READY (6 bytes)
[66810.104975] bytes: 00 00 00 00 00 00
[66810.104979] Bulk Command S 0x43425355 T 0x3fbd9 L 0 F 0 Trg 0 LUN 3 CL 6
[66810.104986] xfer 31 bytes
[66810.105029] Status code 0; transferred 31/31
[66810.105033] -- transfer complete
[66810.105036] Bulk command transfer result=0
[66810.105038] Attempting to get CSW...
[66810.105040] xfer 13 bytes
[66810.105260] Status code 0; transferred 13/13
[66810.105264] -- transfer complete
[66810.105266] Bulk status result = 0
[66810.105269] Bulk Status S 0x53425355 T 0x3fbd9 R 0 Stat 0x1
[66810.105273] -- transport indicates command failure
[66810.105275] Issuing auto-REQUEST_SENSE
[66810.105278] Bulk Command S 0x43425355 T 0x3fbda L 96 F 128 Trg 0 LUN 3 CL 6
[66810.105283] xfer 31 bytes
[66810.105307] Status code 0; transferred 31/31
[66810.105310] -- transfer complete
[66810.105312] Bulk command transfer result=0
[66810.105315] xfer 96 bytes, 1 entries
[66810.105491] Status code -121; transferred 18/96
[66810.105498] -- short read transfer
[66810.105501] Bulk data transfer result 0x1
[66810.105504] Attempting to get CSW...
[66810.105506] xfer 13 bytes
[66810.105623] Status code -32; transferred 0/13
[66810.105630] clearing endpoint halt for pipe 0xc0008380
[66810.105634] rq=01 rqtype=02 value=0000 index=81 len=0
[66810.105954] result = 0
[66810.105957] Attempting to get CSW (2nd try)...
[66810.105959] xfer 13 bytes
[66810.106002] Status code 0; transferred 13/13
[66810.106006] -- transfer complete
[66810.106008] Bulk status result = 0
[66810.106010] Bulk Status S 0x53425355 T 0x3fbda R 78 Stat 0x0
[66810.106016] -- Result from auto-sense is 0
[66810.106018] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66810.106023] Not Ready: Medium not present
[66810.106028] scsi cmd done, result=0x2
[66810.106034] *** thread sleeping
[66812.087744] *** thread awakened
[66812.087751] Command TEST_UNIT_READY (6 bytes)
[66812.087756] bytes: 00 00 00 00 00 00
[66812.087760] Bulk Command S 0x43425355 T 0x3fbdb L 0 F 0 Trg 0 LUN 2 CL 6
[66812.087767] xfer 31 bytes
[66812.087802] Status code 0; transferred 31/31
[66812.087806] -- transfer complete
[66812.087809] Bulk command transfer result=0
[66812.087811] Attempting to get CSW...
[66812.087813] xfer 13 bytes
[66812.088011] Status code 0; transferred 13/13
[66812.088014] -- transfer complete
[66812.088016] Bulk status result = 0
[66812.088018] Bulk Status S 0x53425355 T 0x3fbdb R 0 Stat 0x1
[66812.088023] -- transport indicates command failure
[66812.088025] Issuing auto-REQUEST_SENSE
[66812.088028] Bulk Command S 0x43425355 T 0x3fbdc L 96 F 128 Trg 0 LUN 2 CL 6
[66812.088033] xfer 31 bytes
[66812.088052] Status code 0; transferred 31/31
[66812.088055] -- transfer complete
[66812.088057] Bulk command transfer result=0
[66812.088060] xfer 96 bytes, 1 entries
[66812.088220] Status code -121; transferred 18/96
[66812.088224] -- short read transfer
[66812.088226] Bulk data transfer result 0x1
[66812.088228] Attempting to get CSW...
[66812.088230] xfer 13 bytes
[66812.088339] Status code -32; transferred 0/13
[66812.088343] clearing endpoint halt for pipe 0xc0008380
[66812.088345] rq=01 rqtype=02 value=0000 index=81 len=0
[66812.088723] result = 0
[66812.088729] Attempting to get CSW (2nd try)...
[66812.088731] xfer 13 bytes
[66812.088768] Status code 0; transferred 13/13
[66812.088772] -- transfer complete
[66812.088774] Bulk status result = 0
[66812.088776] Bulk Status S 0x53425355 T 0x3fbdc R 78 Stat 0x0
[66812.088782] -- Result from auto-sense is 0
[66812.088784] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66812.088791] Not Ready: Medium not present
[66812.088795] scsi cmd done, result=0x2
[66812.088802] *** thread sleeping
[66812.088837] *** thread awakened
[66812.088842] Command TEST_UNIT_READY (6 bytes)
[66812.088845] bytes: 00 00 00 00 00 00
[66812.088849] Bulk Command S 0x43425355 T 0x3fbdd L 0 F 0 Trg 0 LUN 0 CL 6
[66812.088855] xfer 31 bytes
[66812.088874] Status code 0; transferred 31/31
[66812.088878] -- transfer complete
[66812.088880] Bulk command transfer result=0
[66812.088882] Attempting to get CSW...
[66812.088884] xfer 13 bytes
[66812.089009] Status code 0; transferred 13/13
[66812.089012] -- transfer complete
[66812.089014] Bulk status result = 0
[66812.089016] Bulk Status S 0x53425355 T 0x3fbdd R 0 Stat 0x1
[66812.089021] -- transport indicates command failure
[66812.089023] Issuing auto-REQUEST_SENSE
[66812.089025] Bulk Command S 0x43425355 T 0x3fbde L 96 F 128 Trg 0 LUN 0 CL 6
[66812.089031] xfer 31 bytes
[66812.089051] Status code 0; transferred 31/31
[66812.089054] -- transfer complete
[66812.089056] Bulk command transfer result=0
[66812.089058] xfer 96 bytes, 1 entries
[66812.089199] Status code -121; transferred 18/96
[66812.089203] -- short read transfer
[66812.089205] Bulk data transfer result 0x1
[66812.089207] Attempting to get CSW...
[66812.089209] xfer 13 bytes
[66812.089341] Status code -32; transferred 0/13
[66812.089349] clearing endpoint halt for pipe 0xc0008380
[66812.089353] rq=01 rqtype=02 value=0000 index=81 len=0
[66812.089740] result = 0
[66812.089746] Attempting to get CSW (2nd try)...
[66812.089748] xfer 13 bytes
[66812.089783] Status code 0; transferred 13/13
[66812.089788] -- transfer complete
[66812.089790] Bulk status result = 0
[66812.089792] Bulk Status S 0x53425355 T 0x3fbde R 78 Stat 0x0
[66812.089798] -- Result from auto-sense is 0
[66812.089800] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66812.089806] Not Ready: Medium not present
[66812.089811] scsi cmd done, result=0x2
[66812.089817] *** thread sleeping
[66812.151776] *** thread awakened
[66812.151782] Command TEST_UNIT_READY (6 bytes)
[66812.151787] bytes: 00 00 00 00 00 00
[66812.151792] Bulk Command S 0x43425355 T 0x3fbdf L 0 F 0 Trg 0 LUN 1 CL 6
[66812.151799] xfer 31 bytes
[66812.151832] Status code 0; transferred 31/31
[66812.151837] -- transfer complete
[66812.151839] Bulk command transfer result=0
[66812.151841] Attempting to get CSW...
[66812.151843] xfer 13 bytes
[66812.152200] Status code 0; transferred 13/13
[66812.152203] -- transfer complete
[66812.152205] Bulk status result = 0
[66812.152207] Bulk Status S 0x53425355 T 0x3fbdf R 0 Stat 0x1
[66812.152212] -- transport indicates command failure
[66812.152214] Issuing auto-REQUEST_SENSE
[66812.152216] Bulk Command S 0x43425355 T 0x3fbe0 L 96 F 128 Trg 0 LUN 1 CL 6
[66812.152222] xfer 31 bytes
[66812.152240] Status code 0; transferred 31/31
[66812.152243] -- transfer complete
[66812.152245] Bulk command transfer result=0
[66812.152247] xfer 96 bytes, 1 entries
[66812.152366] Status code -121; transferred 18/96
[66812.152370] -- short read transfer
[66812.152372] Bulk data transfer result 0x1
[66812.152374] Attempting to get CSW...
[66812.152376] xfer 13 bytes
[66812.152485] Status code -32; transferred 0/13
[66812.152489] clearing endpoint halt for pipe 0xc0008380
[66812.152492] rq=01 rqtype=02 value=0000 index=81 len=0
[66812.152853] result = 0
[66812.152859] Attempting to get CSW (2nd try)...
[66812.152862] xfer 13 bytes
[66812.152897] Status code 0; transferred 13/13
[66812.152901] -- transfer complete
[66812.152903] Bulk status result = 0
[66812.152905] Bulk Status S 0x53425355 T 0x3fbe0 R 78 Stat 0x0
[66812.152912] -- Result from auto-sense is 0
[66812.152914] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66812.152920] Not Ready: Medium not present
[66812.152925] scsi cmd done, result=0x2
[66812.152931] *** thread sleeping
[66812.153021] *** thread awakened
[66812.153024] Command TEST_UNIT_READY (6 bytes)
[66812.153027] bytes: 00 00 00 00 00 00
[66812.153031] Bulk Command S 0x43425355 T 0x3fbe1 L 0 F 0 Trg 0 LUN 3 CL 6
[66812.153038] xfer 31 bytes
[66812.153064] Status code 0; transferred 31/31
[66812.153068] -- transfer complete
[66812.153070] Bulk command transfer result=0
[66812.153072] Attempting to get CSW...
[66812.153074] xfer 13 bytes
[66812.153302] Status code 0; transferred 13/13
[66812.153305] -- transfer complete
[66812.153307] Bulk status result = 0
[66812.153309] Bulk Status S 0x53425355 T 0x3fbe1 R 0 Stat 0x1
[66812.153313] -- transport indicates command failure
[66812.153315] Issuing auto-REQUEST_SENSE
[66812.153318] Bulk Command S 0x43425355 T 0x3fbe2 L 96 F 128 Trg 0 LUN 3 CL 6
[66812.153323] xfer 31 bytes
[66812.153348] Status code 0; transferred 31/31
[66812.153351] -- transfer complete
[66812.153352] Bulk command transfer result=0
[66812.153355] xfer 96 bytes, 1 entries
[66812.153542] Status code -121; transferred 18/96
[66812.153549] -- short read transfer
[66812.153551] Bulk data transfer result 0x1
[66812.153554] Attempting to get CSW...
[66812.153556] xfer 13 bytes
[66812.153679] Status code -32; transferred 0/13
[66812.153687] clearing endpoint halt for pipe 0xc0008380
[66812.153690] rq=01 rqtype=02 value=0000 index=81 len=0
[66812.154039] result = 0
[66812.154045] Attempting to get CSW (2nd try)...
[66812.154048] xfer 13 bytes
[66812.154082] Status code 0; transferred 13/13
[66812.154087] -- transfer complete
[66812.154089] Bulk status result = 0
[66812.154091] Bulk Status S 0x53425355 T 0x3fbe2 R 78 Stat 0x0
[66812.154097] -- Result from auto-sense is 0
[66812.154099] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66812.154104] Not Ready: Medium not present
[66812.154108] scsi cmd done, result=0x2
[66812.154114] *** thread sleeping
[66814.135781] *** thread awakened
[66814.135788] Command TEST_UNIT_READY (6 bytes)
[66814.135793] bytes: 00 00 00 00 00 00
[66814.135798] Bulk Command S 0x43425355 T 0x3fbe3 L 0 F 0 Trg 0 LUN 0 CL 6
[66814.135804] xfer 31 bytes
[66814.135844] Status code 0; transferred 31/31
[66814.135848] -- transfer complete
[66814.135850] Bulk command transfer result=0
[66814.135852] Attempting to get CSW...
[66814.135854] xfer 13 bytes
[66814.135927] Status code 0; transferred 13/13
[66814.135930] -- transfer complete
[66814.135932] Bulk status result = 0
[66814.135934] Bulk Status S 0x53425355 T 0x3fbe3 R 0 Stat 0x1
[66814.135938] -- transport indicates command failure
[66814.135941] Issuing auto-REQUEST_SENSE
[66814.135943] Bulk Command S 0x43425355 T 0x3fbe4 L 96 F 128 Trg 0 LUN 0 CL 6
[66814.135949] xfer 31 bytes
[66814.135967] Status code 0; transferred 31/31
[66814.135970] -- transfer complete
[66814.135972] Bulk command transfer result=0
[66814.135974] xfer 96 bytes, 1 entries
[66814.136095] Status code -121; transferred 18/96
[66814.136099] -- short read transfer
[66814.136101] Bulk data transfer result 0x1
[66814.136103] Attempting to get CSW...
[66814.136105] xfer 13 bytes
[66814.136214] Status code -32; transferred 0/13
[66814.136218] clearing endpoint halt for pipe 0xc0008380
[66814.136220] rq=01 rqtype=02 value=0000 index=81 len=0
[66814.136518] result = 0
[66814.136520] Attempting to get CSW (2nd try)...
[66814.136522] xfer 13 bytes
[66814.136555] Status code 0; transferred 13/13
[66814.136559] -- transfer complete
[66814.136585] Bulk status result = 0
[66814.136587] Bulk Status S 0x53425355 T 0x3fbe4 R 78 Stat 0x0
[66814.136592] -- Result from auto-sense is 0
[66814.136594] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66814.136600] Not Ready: Medium not present
[66814.136604] scsi cmd done, result=0x2
[66814.136610] *** thread sleeping
[66814.136652] *** thread awakened
[66814.136655] Command TEST_UNIT_READY (6 bytes)
[66814.136658] bytes: 00 00 00 00 00 00
[66814.136662] Bulk Command S 0x43425355 T 0x3fbe5 L 0 F 0 Trg 0 LUN 2 CL 6
[66814.136667] xfer 31 bytes
[66814.136687] Status code 0; transferred 31/31
[66814.136690] -- transfer complete
[66814.136692] Bulk command transfer result=0
[66814.136694] Attempting to get CSW...
[66814.136696] xfer 13 bytes
[66814.136969] Status code 0; transferred 13/13
[66814.136972] -- transfer complete
[66814.136973] Bulk status result = 0
[66814.136975] Bulk Status S 0x53425355 T 0x3fbe5 R 0 Stat 0x1
[66814.136979] -- transport indicates command failure
[66814.136981] Issuing auto-REQUEST_SENSE
[66814.136984] Bulk Command S 0x43425355 T 0x3fbe6 L 96 F 128 Trg 0 LUN 2 CL 6
[66814.136989] xfer 31 bytes
[66814.137008] Status code 0; transferred 31/31
[66814.137011] -- transfer complete
[66814.137013] Bulk command transfer result=0
[66814.137015] xfer 96 bytes, 1 entries
[66814.137181] Status code -121; transferred 18/96
[66814.137184] -- short read transfer
[66814.137186] Bulk data transfer result 0x1
[66814.137188] Attempting to get CSW...
[66814.137192] xfer 13 bytes
[66814.137300] Status code -32; transferred 0/13
[66814.137303] clearing endpoint halt for pipe 0xc0008380
[66814.137306] rq=01 rqtype=02 value=0000 index=81 len=0
[66814.137682] result = 0
[66814.137688] Attempting to get CSW (2nd try)...
[66814.137690] xfer 13 bytes
[66814.137725] Status code 0; transferred 13/13
[66814.137729] -- transfer complete
[66814.137731] Bulk status result = 0
[66814.137734] Bulk Status S 0x53425355 T 0x3fbe6 R 78 Stat 0x0
[66814.137740] -- Result from auto-sense is 0
[66814.137742] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66814.137747] Not Ready: Medium not present
[66814.137751] scsi cmd done, result=0x2
[66814.137757] *** thread sleeping
[66814.199759] *** thread awakened
[66814.199765] Command TEST_UNIT_READY (6 bytes)
[66814.199770] bytes: 00 00 00 00 00 00
[66814.199774] Bulk Command S 0x43425355 T 0x3fbe7 L 0 F 0 Trg 0 LUN 1 CL 6
[66814.199780] xfer 31 bytes
[66814.199815] Status code 0; transferred 31/31
[66814.199818] -- transfer complete
[66814.199820] Bulk command transfer result=0
[66814.199823] Attempting to get CSW...
[66814.199825] xfer 13 bytes
[66814.200179] Status code 0; transferred 13/13
[66814.200182] -- transfer complete
[66814.200184] Bulk status result = 0
[66814.200186] Bulk Status S 0x53425355 T 0x3fbe7 R 0 Stat 0x1
[66814.200191] -- transport indicates command failure
[66814.200193] Issuing auto-REQUEST_SENSE
[66814.200195] Bulk Command S 0x43425355 T 0x3fbe8 L 96 F 128 Trg 0 LUN 1 CL 6
[66814.200201] xfer 31 bytes
[66814.200219] Status code 0; transferred 31/31
[66814.200222] -- transfer complete
[66814.200224] Bulk command transfer result=0
[66814.200226] xfer 96 bytes, 1 entries
[66814.200366] Status code -121; transferred 18/96
[66814.200370] -- short read transfer
[66814.200372] Bulk data transfer result 0x1
[66814.200374] Attempting to get CSW...
[66814.200376] xfer 13 bytes
[66814.200486] Status code -32; transferred 0/13
[66814.200489] clearing endpoint halt for pipe 0xc0008380
[66814.200492] rq=01 rqtype=02 value=0000 index=81 len=0
[66814.200852] result = 0
[66814.200858] Attempting to get CSW (2nd try)...
[66814.200860] xfer 13 bytes
[66814.200895] Status code 0; transferred 13/13
[66814.200900] -- transfer complete
[66814.200902] Bulk status result = 0
[66814.200904] Bulk Status S 0x53425355 T 0x3fbe8 R 78 Stat 0x0
[66814.200910] -- Result from auto-sense is 0
[66814.200912] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66814.200918] Not Ready: Medium not present
[66814.200922] scsi cmd done, result=0x2
[66814.200929] *** thread sleeping
[66814.201008] *** thread awakened
[66814.201011] Command TEST_UNIT_READY (6 bytes)
[66814.201014] bytes: 00 00 00 00 00 00
[66814.201018] Bulk Command S 0x43425355 T 0x3fbe9 L 0 F 0 Trg 0 LUN 3 CL 6
[66814.201024] xfer 31 bytes
[66814.201050] Status code 0; transferred 31/31
[66814.201054] -- transfer complete
[66814.201056] Bulk command transfer result=0
[66814.201058] Attempting to get CSW...
[66814.201060] xfer 13 bytes
[66814.201301] Status code 0; transferred 13/13
[66814.201304] -- transfer complete
[66814.201305] Bulk status result = 0
[66814.201308] Bulk Status S 0x53425355 T 0x3fbe9 R 0 Stat 0x1
[66814.201312] -- transport indicates command failure
[66814.201314] Issuing auto-REQUEST_SENSE
[66814.201316] Bulk Command S 0x43425355 T 0x3fbea L 96 F 128 Trg 0 LUN 3 CL 6
[66814.201323] xfer 31 bytes
[66814.201348] Status code 0; transferred 31/31
[66814.201351] -- transfer complete
[66814.201352] Bulk command transfer result=0
[66814.201355] xfer 96 bytes, 1 entries
[66814.201533] Status code -121; transferred 18/96
[66814.201540] -- short read transfer
[66814.201543] Bulk data transfer result 0x1
[66814.201545] Attempting to get CSW...
[66814.201549] xfer 13 bytes
[66814.201664] Status code -32; transferred 0/13
[66814.201671] clearing endpoint halt for pipe 0xc0008380
[66814.201674] rq=01 rqtype=02 value=0000 index=81 len=0
[66814.202014] result = 0
[66814.202020] Attempting to get CSW (2nd try)...
[66814.202022] xfer 13 bytes
[66814.202057] Status code 0; transferred 13/13
[66814.202061] -- transfer complete
[66814.202063] Bulk status result = 0
[66814.202066] Bulk Status S 0x53425355 T 0x3fbea R 78 Stat 0x0
[66814.202072] -- Result from auto-sense is 0
[66814.202075] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66814.202080] Not Ready: Medium not present
[66814.202084] scsi cmd done, result=0x2
[66814.202090] *** thread sleeping
[66816.183724] *** thread awakened
[66816.183730] Command TEST_UNIT_READY (6 bytes)
[66816.183734] bytes: 00 00 00 00 00 00
[66816.183738] Bulk Command S 0x43425355 T 0x3fbeb L 0 F 0 Trg 0 LUN 2 CL 6
[66816.183744] xfer 31 bytes
[66816.183780] Status code 0; transferred 31/31
[66816.183784] -- transfer complete
[66816.183786] Bulk command transfer result=0
[66816.183788] Attempting to get CSW...
[66816.183789] xfer 13 bytes
[66816.183994] Status code 0; transferred 13/13
[66816.183997] -- transfer complete
[66816.183998] Bulk status result = 0
[66816.184000] Bulk Status S 0x53425355 T 0x3fbeb R 0 Stat 0x1
[66816.184005] -- transport indicates command failure
[66816.184007] Issuing auto-REQUEST_SENSE
[66816.184009] Bulk Command S 0x43425355 T 0x3fbec L 96 F 128 Trg 0 LUN 2 CL 6
[66816.184014] xfer 31 bytes
[66816.184033] Status code 0; transferred 31/31
[66816.184035] -- transfer complete
[66816.184037] Bulk command transfer result=0
[66816.184039] xfer 96 bytes, 1 entries
[66816.184198] Status code -121; transferred 18/96
[66816.184202] -- short read transfer
[66816.184203] Bulk data transfer result 0x1
[66816.184205] Attempting to get CSW...
[66816.184207] xfer 13 bytes
[66816.184317] Status code -32; transferred 0/13
[66816.184320] clearing endpoint halt for pipe 0xc0008380
[66816.184323] rq=01 rqtype=02 value=0000 index=81 len=0
[66816.184685] result = 0
[66816.184691] Attempting to get CSW (2nd try)...
[66816.184693] xfer 13 bytes
[66816.184728] Status code 0; transferred 13/13
[66816.184732] -- transfer complete
[66816.184734] Bulk status result = 0
[66816.184736] Bulk Status S 0x53425355 T 0x3fbec R 78 Stat 0x0
[66816.184741] -- Result from auto-sense is 0
[66816.184743] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66816.184748] Not Ready: Medium not present
[66816.184752] scsi cmd done, result=0x2
[66816.184758] *** thread sleeping
[66816.184791] *** thread awakened
[66816.184793] Command TEST_UNIT_READY (6 bytes)
[66816.184796] bytes: 00 00 00 00 00 00
[66816.184800] Bulk Command S 0x43425355 T 0x3fbed L 0 F 0 Trg 0 LUN 0 CL 6
[66816.184806] xfer 31 bytes
[66816.184823] Status code 0; transferred 31/31
[66816.184826] -- transfer complete
[66816.184828] Bulk command transfer result=0
[66816.184830] Attempting to get CSW...
[66816.184832] xfer 13 bytes
[66816.184946] Status code 0; transferred 13/13
[66816.184949] -- transfer complete
[66816.184950] Bulk status result = 0
[66816.184952] Bulk Status S 0x53425355 T 0x3fbed R 0 Stat 0x1
[66816.184956] -- transport indicates command failure
[66816.184958] Issuing auto-REQUEST_SENSE
[66816.184960] Bulk Command S 0x43425355 T 0x3fbee L 96 F 128 Trg 0 LUN 0 CL 6
[66816.184965] xfer 31 bytes
[66816.184986] Status code 0; transferred 31/31
[66816.184988] -- transfer complete
[66816.184992] Bulk command transfer result=0
[66816.184994] xfer 96 bytes, 1 entries
[66816.185139] Status code -121; transferred 18/96
[66816.185142] -- short read transfer
[66816.185144] Bulk data transfer result 0x1
[66816.185146] Attempting to get CSW...
[66816.185148] xfer 13 bytes
[66816.185317] Status code -32; transferred 0/13
[66816.185324] clearing endpoint halt for pipe 0xc0008380
[66816.185327] rq=01 rqtype=02 value=0000 index=81 len=0
[66816.185689] result = 0
[66816.185694] Attempting to get CSW (2nd try)...
[66816.185697] xfer 13 bytes
[66816.185731] Status code 0; transferred 13/13
[66816.185735] -- transfer complete
[66816.185737] Bulk status result = 0
[66816.185739] Bulk Status S 0x53425355 T 0x3fbee R 78 Stat 0x0
[66816.185744] -- Result from auto-sense is 0
[66816.185746] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66816.185750] Not Ready: Medium not present
[66816.185754] scsi cmd done, result=0x2
[66816.185760] *** thread sleeping
[66816.247769] *** thread awakened
[66816.247775] Command TEST_UNIT_READY (6 bytes)
[66816.247780] bytes: 00 00 00 00 00 00
[66816.247785] Bulk Command S 0x43425355 T 0x3fbef L 0 F 0 Trg 0 LUN 3 CL 6
[66816.247791] xfer 31 bytes
[66816.247824] Status code 0; transferred 31/31
[66816.247828] -- transfer complete
[66816.247830] Bulk command transfer result=0
[66816.247833] Attempting to get CSW...
[66816.247835] xfer 13 bytes
[66816.247926] Status code 0; transferred 13/13
[66816.247929] -- transfer complete
[66816.247931] Bulk status result = 0
[66816.247934] Bulk Status S 0x53425355 T 0x3fbef R 0 Stat 0x1
[66816.247939] -- transport indicates command failure
[66816.247941] Issuing auto-REQUEST_SENSE
[66816.247943] Bulk Command S 0x43425355 T 0x3fbf0 L 96 F 128 Trg 0 LUN 3 CL 6
[66816.247949] xfer 31 bytes
[66816.247966] Status code 0; transferred 31/31
[66816.247969] -- transfer complete
[66816.247971] Bulk command transfer result=0
[66816.247973] xfer 96 bytes, 1 entries
[66816.248121] Status code -121; transferred 18/96
[66816.248125] -- short read transfer
[66816.248127] Bulk data transfer result 0x1
[66816.248129] Attempting to get CSW...
[66816.248131] xfer 13 bytes
[66816.248240] Status code -32; transferred 0/13
[66816.248244] clearing endpoint halt for pipe 0xc0008380
[66816.248246] rq=01 rqtype=02 value=0000 index=81 len=0
[66816.248544] result = 0
[66816.248546] Attempting to get CSW (2nd try)...
[66816.248548] xfer 13 bytes
[66816.248587] Status code 0; transferred 13/13
[66816.248590] -- transfer complete
[66816.248592] Bulk status result = 0
[66816.248594] Bulk Status S 0x53425355 T 0x3fbf0 R 78 Stat 0x0
[66816.248599] -- Result from auto-sense is 0
[66816.248601] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66816.248607] Not Ready: Medium not present
[66816.248611] scsi cmd done, result=0x2
[66816.248617] *** thread sleeping
[66816.248671] *** thread awakened
[66816.248674] Command TEST_UNIT_READY (6 bytes)
[66816.248677] bytes: 00 00 00 00 00 00
[66816.248680] Bulk Command S 0x43425355 T 0x3fbf1 L 0 F 0 Trg 0 LUN 1 CL 6
[66816.248685] xfer 31 bytes
[66816.248704] Status code 0; transferred 31/31
[66816.248707] -- transfer complete
[66816.248710] Bulk command transfer result=0
[66816.248712] Attempting to get CSW...
[66816.248714] xfer 13 bytes
[66816.249074] Status code 0; transferred 13/13
[66816.249076] -- transfer complete
[66816.249078] Bulk status result = 0
[66816.249081] Bulk Status S 0x53425355 T 0x3fbf1 R 0 Stat 0x1
[66816.249084] -- transport indicates command failure
[66816.249086] Issuing auto-REQUEST_SENSE
[66816.249088] Bulk Command S 0x43425355 T 0x3fbf2 L 96 F 128 Trg 0 LUN 1 CL 6
[66816.249093] xfer 31 bytes
[66816.249113] Status code 0; transferred 31/31
[66816.249116] -- transfer complete
[66816.249118] Bulk command transfer result=0
[66816.249120] xfer 96 bytes, 1 entries
[66816.249243] Status code -121; transferred 18/96
[66816.249247] -- short read transfer
[66816.249249] Bulk data transfer result 0x1
[66816.249251] Attempting to get CSW...
[66816.249252] xfer 13 bytes
[66816.249363] Status code -32; transferred 0/13
[66816.249366] clearing endpoint halt for pipe 0xc0008380
[66816.249369] rq=01 rqtype=02 value=0000 index=81 len=0
[66816.249734] result = 0
[66816.249742] Attempting to get CSW (2nd try)...
[66816.249745] xfer 13 bytes
[66816.249782] Status code 0; transferred 13/13
[66816.249786] -- transfer complete
[66816.249788] Bulk status result = 0
[66816.249792] Bulk Status S 0x53425355 T 0x3fbf2 R 78 Stat 0x0
[66816.249798] -- Result from auto-sense is 0
[66816.249801] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66816.249806] Not Ready: Medium not present
[66816.249810] scsi cmd done, result=0x2
[66816.249815] *** thread sleeping
[66818.231656] *** thread awakened
[66818.231662] Command TEST_UNIT_READY (6 bytes)
[66818.231666] bytes: 00 00 00 00 00 00
[66818.231670] Bulk Command S 0x43425355 T 0x3fbf3 L 0 F 0 Trg 0 LUN 0 CL 6
[66818.231677] xfer 31 bytes
[66818.231713] Status code 0; transferred 31/31
[66818.231717] -- transfer complete
[66818.231719] Bulk command transfer result=0
[66818.231721] Attempting to get CSW...
[66818.231723] xfer 13 bytes
[66818.231887] Status code 0; transferred 13/13
[66818.231893] -- transfer complete
[66818.231895] Bulk status result = 0
[66818.231897] Bulk Status S 0x53425355 T 0x3fbf3 R 0 Stat 0x1
[66818.231902] -- transport indicates command failure
[66818.231904] Issuing auto-REQUEST_SENSE
[66818.231906] Bulk Command S 0x43425355 T 0x3fbf4 L 96 F 128 Trg 0 LUN 0 CL 6
[66818.231912] xfer 31 bytes
[66818.231941] Status code 0; transferred 31/31
[66818.231944] -- transfer complete
[66818.231946] Bulk command transfer result=0
[66818.231948] xfer 96 bytes, 1 entries
[66818.232116] Status code -121; transferred 18/96
[66818.232123] -- short read transfer
[66818.232125] Bulk data transfer result 0x1
[66818.232128] Attempting to get CSW...
[66818.232129] xfer 13 bytes
[66818.232230] Status code -32; transferred 0/13
[66818.232234] clearing endpoint halt for pipe 0xc0008380
[66818.232236] rq=01 rqtype=02 value=0000 index=81 len=0
[66818.232534] result = 0
[66818.232536] Attempting to get CSW (2nd try)...
[66818.232538] xfer 13 bytes
[66818.232603] Status code 0; transferred 13/13
[66818.232610] -- transfer complete
[66818.232612] Bulk status result = 0
[66818.232614] Bulk Status S 0x53425355 T 0x3fbf4 R 78 Stat 0x0
[66818.232620] -- Result from auto-sense is 0
[66818.232622] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66818.232631] Not Ready: Medium not present
[66818.232636] scsi cmd done, result=0x2
[66818.232641] *** thread sleeping
[66818.232708] *** thread awakened
[66818.232713] Command TEST_UNIT_READY (6 bytes)
[66818.232718] bytes: 00 00 00 00 00 00
[66818.232721] Bulk Command S 0x43425355 T 0x3fbf5 L 0 F 0 Trg 0 LUN 2 CL 6
[66818.232727] xfer 31 bytes
[66818.232756] Status code 0; transferred 31/31
[66818.232761] -- transfer complete
[66818.232762] Bulk command transfer result=0
[66818.232764] Attempting to get CSW...
[66818.232766] xfer 13 bytes
[66818.232974] Status code 0; transferred 13/13
[66818.232977] -- transfer complete
[66818.232978] Bulk status result = 0
[66818.232980] Bulk Status S 0x53425355 T 0x3fbf5 R 0 Stat 0x1
[66818.232985] -- transport indicates command failure
[66818.232986] Issuing auto-REQUEST_SENSE
[66818.232988] Bulk Command S 0x43425355 T 0x3fbf6 L 96 F 128 Trg 0 LUN 2 CL 6
[66818.232993] xfer 31 bytes
[66818.233024] Status code 0; transferred 31/31
[66818.233027] -- transfer complete
[66818.233029] Bulk command transfer result=0
[66818.233031] xfer 96 bytes, 1 entries
[66818.233225] Status code -121; transferred 18/96
[66818.233232] -- short read transfer
[66818.233234] Bulk data transfer result 0x1
[66818.233236] Attempting to get CSW...
[66818.233238] xfer 13 bytes
[66818.233387] Status code -32; transferred 0/13
[66818.233393] clearing endpoint halt for pipe 0xc0008380
[66818.233396] rq=01 rqtype=02 value=0000 index=81 len=0
[66818.233772] result = 0
[66818.233777] Attempting to get CSW (2nd try)...
[66818.233779] xfer 13 bytes
[66818.233808] Status code 0; transferred 13/13
[66818.233812] -- transfer complete
[66818.233814] Bulk status result = 0
[66818.233816] Bulk Status S 0x53425355 T 0x3fbf6 R 78 Stat 0x0
[66818.233821] -- Result from auto-sense is 0
[66818.233823] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66818.233828] Not Ready: Medium not present
[66818.233832] scsi cmd done, result=0x2
[66818.233838] *** thread sleeping
[66818.295760] *** thread awakened
[66818.295766] Command TEST_UNIT_READY (6 bytes)
[66818.295771] bytes: 00 00 00 00 00 00
[66818.295775] Bulk Command S 0x43425355 T 0x3fbf7 L 0 F 0 Trg 0 LUN 3 CL 6
[66818.295782] xfer 31 bytes
[66818.295876] Status code 0; transferred 31/31
[66818.295883] -- transfer complete
[66818.295885] Bulk command transfer result=0
[66818.295888] Attempting to get CSW...
[66818.295890] xfer 13 bytes
[66818.296184] Status code 0; transferred 13/13
[66818.296192] -- transfer complete
[66818.296195] Bulk status result = 0
[66818.296198] Bulk Status S 0x53425355 T 0x3fbf7 R 0 Stat 0x1
[66818.296203] -- transport indicates command failure
[66818.296206] Issuing auto-REQUEST_SENSE
[66818.296209] Bulk Command S 0x43425355 T 0x3fbf8 L 96 F 128 Trg 0 LUN 3 CL 6
[66818.296215] xfer 31 bytes
[66818.296276] Status code 0; transferred 31/31
[66818.296280] -- transfer complete
[66818.296282] Bulk command transfer result=0
[66818.296284] xfer 96 bytes, 1 entries
[66818.296427] Status code -121; transferred 18/96
[66818.296431] -- short read transfer
[66818.296433] Bulk data transfer result 0x1
[66818.296435] Attempting to get CSW...
[66818.296437] xfer 13 bytes
[66818.296613] Status code -32; transferred 0/13
[66818.296618] clearing endpoint halt for pipe 0xc0008380
[66818.296620] rq=01 rqtype=02 value=0000 index=81 len=0
[66818.296977] result = 0
[66818.296982] Attempting to get CSW (2nd try)...
[66818.296985] xfer 13 bytes
[66818.297012] Status code 0; transferred 13/13
[66818.297017] -- transfer complete
[66818.297019] Bulk status result = 0
[66818.297021] Bulk Status S 0x53425355 T 0x3fbf8 R 78 Stat 0x0
[66818.297027] -- Result from auto-sense is 0
[66818.297029] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66818.297036] Not Ready: Medium not present
[66818.297041] scsi cmd done, result=0x2
[66818.297048] *** thread sleeping
[66818.297175] *** thread awakened
[66818.297181] Command TEST_UNIT_READY (6 bytes)
[66818.297186] bytes: 00 00 00 00 00 00
[66818.297190] Bulk Command S 0x43425355 T 0x3fbf9 L 0 F 0 Trg 0 LUN 1 CL 6
[66818.297197] xfer 31 bytes
[66818.297224] Status code 0; transferred 31/31
[66818.297228] -- transfer complete
[66818.297232] Bulk command transfer result=0
[66818.297235] Attempting to get CSW...
[66818.297237] xfer 13 bytes
[66818.297619] Status code 0; transferred 13/13
[66818.297626] -- transfer complete
[66818.297628] Bulk status result = 0
[66818.297631] Bulk Status S 0x53425355 T 0x3fbf9 R 0 Stat 0x1
[66818.297636] -- transport indicates command failure
[66818.297638] Issuing auto-REQUEST_SENSE
[66818.297641] Bulk Command S 0x43425355 T 0x3fbfa L 96 F 128 Trg 0 LUN 1 CL 6
[66818.297647] xfer 31 bytes
[66818.297671] Status code 0; transferred 31/31
[66818.297675] -- transfer complete
[66818.297676] Bulk command transfer result=0
[66818.297679] xfer 96 bytes, 1 entries
[66818.297841] Status code -121; transferred 18/96
[66818.297848] -- short read transfer
[66818.297851] Bulk data transfer result 0x1
[66818.297853] Attempting to get CSW...
[66818.297855] xfer 13 bytes
[66818.297991] Status code -32; transferred 0/13
[66818.297999] clearing endpoint halt for pipe 0xc0008380
[66818.298002] rq=01 rqtype=02 value=0000 index=81 len=0
[66818.298360] result = 0
[66818.298366] Attempting to get CSW (2nd try)...
[66818.298369] xfer 13 bytes
[66818.298396] Status code 0; transferred 13/13
[66818.298400] -- transfer complete
[66818.298402] Bulk status result = 0
[66818.298404] Bulk Status S 0x53425355 T 0x3fbfa R 78 Stat 0x0
[66818.298410] -- Result from auto-sense is 0
[66818.298413] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66818.298418] Not Ready: Medium not present
[66818.298422] scsi cmd done, result=0x2
[66818.298428] *** thread sleeping
[66820.279651] *** thread awakened
[66820.279658] Command TEST_UNIT_READY (6 bytes)
[66820.279663] bytes: 00 00 00 00 00 00
[66820.279667] Bulk Command S 0x43425355 T 0x3fbfb L 0 F 0 Trg 0 LUN 2 CL 6
[66820.279674] xfer 31 bytes
[66820.279802] Status code 0; transferred 31/31
[66820.279809] -- transfer complete
[66820.279812] Bulk command transfer result=0
[66820.279814] Attempting to get CSW...
[66820.279816] xfer 13 bytes
[66820.280008] Status code 0; transferred 13/13
[66820.280016] -- transfer complete
[66820.280018] Bulk status result = 0
[66820.280020] Bulk Status S 0x53425355 T 0x3fbfb R 0 Stat 0x1
[66820.280026] -- transport indicates command failure
[66820.280028] Issuing auto-REQUEST_SENSE
[66820.280031] Bulk Command S 0x43425355 T 0x3fbfc L 96 F 128 Trg 0 LUN 2 CL 6
[66820.280037] xfer 31 bytes
[66820.280111] Status code 0; transferred 31/31
[66820.280115] -- transfer complete
[66820.280117] Bulk command transfer result=0
[66820.280119] xfer 96 bytes, 1 entries
[66820.280278] Status code -121; transferred 18/96
[66820.280282] -- short read transfer
[66820.280283] Bulk data transfer result 0x1
[66820.280286] Attempting to get CSW...
[66820.280288] xfer 13 bytes
[66820.280447] Status code -32; transferred 0/13
[66820.280451] clearing endpoint halt for pipe 0xc0008380
[66820.280454] rq=01 rqtype=02 value=0000 index=81 len=0
[66820.280823] result = 0
[66820.280828] Attempting to get CSW (2nd try)...
[66820.280831] xfer 13 bytes
[66820.280860] Status code 0; transferred 13/13
[66820.280864] -- transfer complete
[66820.280866] Bulk status result = 0
[66820.280868] Bulk Status S 0x53425355 T 0x3fbfc R 78 Stat 0x0
[66820.280874] -- Result from auto-sense is 0
[66820.280876] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66820.280882] Not Ready: Medium not present
[66820.280886] scsi cmd done, result=0x2
[66820.280893] *** thread sleeping
[66820.280936] *** thread awakened
[66820.280939] Command TEST_UNIT_READY (6 bytes)
[66820.280942] bytes: 00 00 00 00 00 00
[66820.280946] Bulk Command S 0x43425355 T 0x3fbfd L 0 F 0 Trg 0 LUN 0 CL 6
[66820.280952] xfer 31 bytes
[66820.280985] Status code 0; transferred 31/31
[66820.280989] -- transfer complete
[66820.280991] Bulk command transfer result=0
[66820.280995] Attempting to get CSW...
[66820.280997] xfer 13 bytes
[66820.281139] Status code 0; transferred 13/13
[66820.281146] -- transfer complete
[66820.281148] Bulk status result = 0
[66820.281151] Bulk Status S 0x53425355 T 0x3fbfd R 0 Stat 0x1
[66820.281157] -- transport indicates command failure
[66820.281159] Issuing auto-REQUEST_SENSE
[66820.281161] Bulk Command S 0x43425355 T 0x3fbfe L 96 F 128 Trg 0 LUN 0 CL 6
[66820.281167] xfer 31 bytes
[66820.281190] Status code 0; transferred 31/31
[66820.281194] -- transfer complete
[66820.281196] Bulk command transfer result=0
[66820.281198] xfer 96 bytes, 1 entries
[66820.281359] Status code -121; transferred 18/96
[66820.281366] -- short read transfer
[66820.281369] Bulk data transfer result 0x1
[66820.281372] Attempting to get CSW...
[66820.281374] xfer 13 bytes
[66820.281511] Status code -32; transferred 0/13
[66820.281518] clearing endpoint halt for pipe 0xc0008380
[66820.281522] rq=01 rqtype=02 value=0000 index=81 len=0
[66820.281861] result = 0
[66820.281867] Attempting to get CSW (2nd try)...
[66820.281869] xfer 13 bytes
[66820.281898] Status code 0; transferred 13/13
[66820.281902] -- transfer complete
[66820.281904] Bulk status result = 0
[66820.281906] Bulk Status S 0x53425355 T 0x3fbfe R 78 Stat 0x0
[66820.281912] -- Result from auto-sense is 0
[66820.281915] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66820.281920] Not Ready: Medium not present
[66820.281924] scsi cmd done, result=0x2
[66820.281931] *** thread sleeping
[66820.343761] *** thread awakened
[66820.343767] Command TEST_UNIT_READY (6 bytes)
[66820.343772] bytes: 00 00 00 00 00 00
[66820.343777] Bulk Command S 0x43425355 T 0x3fbff L 0 F 0 Trg 0 LUN 1 CL 6
[66820.343784] xfer 31 bytes
[66820.343876] Status code 0; transferred 31/31
[66820.343883] -- transfer complete
[66820.343885] Bulk command transfer result=0
[66820.343888] Attempting to get CSW...
[66820.343890] xfer 13 bytes
[66820.344089] Status code 0; transferred 13/13
[66820.344092] -- transfer complete
[66820.344094] Bulk status result = 0
[66820.344097] Bulk Status S 0x53425355 T 0x3fbff R 0 Stat 0x1
[66820.344102] -- transport indicates command failure
[66820.344104] Issuing auto-REQUEST_SENSE
[66820.344107] Bulk Command S 0x43425355 T 0x3fc00 L 96 F 128 Trg 0 LUN 1 CL 6
[66820.344113] xfer 31 bytes
[66820.344169] Status code 0; transferred 31/31
[66820.344172] -- transfer complete
[66820.344174] Bulk command transfer result=0
[66820.344176] xfer 96 bytes, 1 entries
[66820.344298] Status code -121; transferred 18/96
[66820.344302] -- short read transfer
[66820.344303] Bulk data transfer result 0x1
[66820.344306] Attempting to get CSW...
[66820.344308] xfer 13 bytes
[66820.344447] Status code -32; transferred 0/13
[66820.344451] clearing endpoint halt for pipe 0xc0008380
[66820.344454] rq=01 rqtype=02 value=0000 index=81 len=0
[66820.344815] result = 0
[66820.344822] Attempting to get CSW (2nd try)...
[66820.344824] xfer 13 bytes
[66820.344853] Status code 0; transferred 13/13
[66820.344858] -- transfer complete
[66820.344860] Bulk status result = 0
[66820.344862] Bulk Status S 0x53425355 T 0x3fc00 R 78 Stat 0x0
[66820.344868] -- Result from auto-sense is 0
[66820.344870] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66820.344875] Not Ready: Medium not present
[66820.344880] scsi cmd done, result=0x2
[66820.344887] *** thread sleeping
[66820.345005] *** thread awakened
[66820.345011] Command TEST_UNIT_READY (6 bytes)
[66820.345015] bytes: 00 00 00 00 00 00
[66820.345019] Bulk Command S 0x43425355 T 0x3fc01 L 0 F 0 Trg 0 LUN 3 CL 6
[66820.345026] xfer 31 bytes
[66820.345069] Status code 0; transferred 31/31
[66820.345073] -- transfer complete
[66820.345075] Bulk command transfer result=0
[66820.345077] Attempting to get CSW...
[66820.345079] xfer 13 bytes
[66820.345338] Status code 0; transferred 13/13
[66820.345345] -- transfer complete
[66820.345347] Bulk status result = 0
[66820.345350] Bulk Status S 0x53425355 T 0x3fc01 R 0 Stat 0x1
[66820.345355] -- transport indicates command failure
[66820.345357] Issuing auto-REQUEST_SENSE
[66820.345360] Bulk Command S 0x43425355 T 0x3fc02 L 96 F 128 Trg 0 LUN 3 CL 6
[66820.345366] xfer 31 bytes
[66820.345396] Status code 0; transferred 31/31
[66820.345401] -- transfer complete
[66820.345403] Bulk command transfer result=0
[66820.345405] xfer 96 bytes, 1 entries
[66820.345572] Status code -121; transferred 18/96
[66820.345590] -- short read transfer
[66820.345593] Bulk data transfer result 0x1
[66820.345595] Attempting to get CSW...
[66820.345597] xfer 13 bytes
[66820.345734] Status code -32; transferred 0/13
[66820.345743] clearing endpoint halt for pipe 0xc0008380
[66820.345746] rq=01 rqtype=02 value=0000 index=81 len=0
[66820.346080] result = 0
[66820.346086] Attempting to get CSW (2nd try)...
[66820.346089] xfer 13 bytes
[66820.346118] Status code 0; transferred 13/13
[66820.346122] -- transfer complete
[66820.346124] Bulk status result = 0
[66820.346126] Bulk Status S 0x53425355 T 0x3fc02 R 78 Stat 0x0
[66820.346132] -- Result from auto-sense is 0
[66820.346135] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66820.346140] Not Ready: Medium not present
[66820.346144] scsi cmd done, result=0x2
[66820.346150] *** thread sleeping
[66822.327653] *** thread awakened
[66822.327660] Command TEST_UNIT_READY (6 bytes)
[66822.327665] bytes: 00 00 00 00 00 00
[66822.327669] Bulk Command S 0x43425355 T 0x3fc03 L 0 F 0 Trg 0 LUN 0 CL 6
[66822.327676] xfer 31 bytes
[66822.327804] Status code 0; transferred 31/31
[66822.327811] -- transfer complete
[66822.327814] Bulk command transfer result=0
[66822.327816] Attempting to get CSW...
[66822.327818] xfer 13 bytes
[66822.327939] Status code 0; transferred 13/13
[66822.327946] -- transfer complete
[66822.327948] Bulk status result = 0
[66822.327951] Bulk Status S 0x53425355 T 0x3fc03 R 0 Stat 0x1
[66822.327956] -- transport indicates command failure
[66822.327958] Issuing auto-REQUEST_SENSE
[66822.327961] Bulk Command S 0x43425355 T 0x3fc04 L 96 F 128 Trg 0 LUN 0 CL 6
[66822.327968] xfer 31 bytes
[66822.328042] Status code 0; transferred 31/31
[66822.328046] -- transfer complete
[66822.328048] Bulk command transfer result=0
[66822.328050] xfer 96 bytes, 1 entries
[66822.328188] Status code -121; transferred 18/96
[66822.328191] -- short read transfer
[66822.328193] Bulk data transfer result 0x1
[66822.328196] Attempting to get CSW...
[66822.328198] xfer 13 bytes
[66822.328366] Status code -32; transferred 0/13
[66822.328370] clearing endpoint halt for pipe 0xc0008380
[66822.328373] rq=01 rqtype=02 value=0000 index=81 len=0
[66822.328740] result = 0
[66822.328746] Attempting to get CSW (2nd try)...
[66822.328748] xfer 13 bytes
[66822.328777] Status code 0; transferred 13/13
[66822.328781] -- transfer complete
[66822.328785] Bulk status result = 0
[66822.328788] Bulk Status S 0x53425355 T 0x3fc04 R 78 Stat 0x0
[66822.328794] -- Result from auto-sense is 0
[66822.328796] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66822.328801] Not Ready: Medium not present
[66822.328806] scsi cmd done, result=0x2
[66822.328813] *** thread sleeping
[66822.328857] *** thread awakened
[66822.328860] Command TEST_UNIT_READY (6 bytes)
[66822.328864] bytes: 00 00 00 00 00 00
[66822.328868] Bulk Command S 0x43425355 T 0x3fc05 L 0 F 0 Trg 0 LUN 2 CL 6
[66822.328874] xfer 31 bytes
[66822.328907] Status code 0; transferred 31/31
[66822.328911] -- transfer complete
[66822.328913] Bulk command transfer result=0
[66822.328915] Attempting to get CSW...
[66822.328917] xfer 13 bytes
[66822.329156] Status code 0; transferred 13/13
[66822.329163] -- transfer complete
[66822.329165] Bulk status result = 0
[66822.329168] Bulk Status S 0x53425355 T 0x3fc05 R 0 Stat 0x1
[66822.329173] -- transport indicates command failure
[66822.329175] Issuing auto-REQUEST_SENSE
[66822.329178] Bulk Command S 0x43425355 T 0x3fc06 L 96 F 128 Trg 0 LUN 2 CL 6
[66822.329184] xfer 31 bytes
[66822.329213] Status code 0; transferred 31/31
[66822.329217] -- transfer complete
[66822.329219] Bulk command transfer result=0
[66822.329221] xfer 96 bytes, 1 entries
[66822.329411] Status code -121; transferred 18/96
[66822.329420] -- short read transfer
[66822.329423] Bulk data transfer result 0x1
[66822.329426] Attempting to get CSW...
[66822.329428] xfer 13 bytes
[66822.329575] Status code -32; transferred 0/13
[66822.329582] clearing endpoint halt for pipe 0xc0008380
[66822.329586] rq=01 rqtype=02 value=0000 index=81 len=0
[66822.329950] result = 0
[66822.329956] Attempting to get CSW (2nd try)...
[66822.329959] xfer 13 bytes
[66822.329988] Status code 0; transferred 13/13
[66822.329992] -- transfer complete
[66822.329994] Bulk status result = 0
[66822.329996] Bulk Status S 0x53425355 T 0x3fc06 R 78 Stat 0x0
[66822.330002] -- Result from auto-sense is 0
[66822.330004] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66822.330009] Not Ready: Medium not present
[66822.330013] scsi cmd done, result=0x2
[66822.330020] *** thread sleeping
[66822.391759] *** thread awakened
[66822.391765] Command TEST_UNIT_READY (6 bytes)
[66822.391770] bytes: 00 00 00 00 00 00
[66822.391775] Bulk Command S 0x43425355 T 0x3fc07 L 0 F 0 Trg 0 LUN 3 CL 6
[66822.391781] xfer 31 bytes
[66822.391873] Status code 0; transferred 31/31
[66822.391881] -- transfer complete
[66822.391883] Bulk command transfer result=0
[66822.391886] Attempting to get CSW...
[66822.391888] xfer 13 bytes
[66822.391987] Status code 0; transferred 13/13
[66822.391990] -- transfer complete
[66822.391992] Bulk status result = 0
[66822.391995] Bulk Status S 0x53425355 T 0x3fc07 R 0 Stat 0x1
[66822.392000] -- transport indicates command failure
[66822.392002] Issuing auto-REQUEST_SENSE
[66822.392005] Bulk Command S 0x43425355 T 0x3fc08 L 96 F 128 Trg 0 LUN 3 CL 6
[66822.392011] xfer 31 bytes
[66822.392065] Status code 0; transferred 31/31
[66822.392068] -- transfer complete
[66822.392070] Bulk command transfer result=0
[66822.392072] xfer 96 bytes, 1 entries
[66822.392215] Status code -121; transferred 18/96
[66822.392219] -- short read transfer
[66822.392221] Bulk data transfer result 0x1
[66822.392223] Attempting to get CSW...
[66822.392225] xfer 13 bytes
[66822.392365] Status code -32; transferred 0/13
[66822.392368] clearing endpoint halt for pipe 0xc0008380
[66822.392371] rq=01 rqtype=02 value=0000 index=81 len=0
[66822.392733] result = 0
[66822.392740] Attempting to get CSW (2nd try)...
[66822.392743] xfer 13 bytes
[66822.392772] Status code 0; transferred 13/13
[66822.392776] -- transfer complete
[66822.392778] Bulk status result = 0
[66822.392781] Bulk Status S 0x53425355 T 0x3fc08 R 78 Stat 0x0
[66822.392786] -- Result from auto-sense is 0
[66822.392789] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66822.392794] Not Ready: Medium not present
[66822.392799] scsi cmd done, result=0x2
[66822.392806] *** thread sleeping
[66822.392924] *** thread awakened
[66822.392929] Command TEST_UNIT_READY (6 bytes)
[66822.392934] bytes: 00 00 00 00 00 00
[66822.392938] Bulk Command S 0x43425355 T 0x3fc09 L 0 F 0 Trg 0 LUN 1 CL 6
[66822.392945] xfer 31 bytes
[66822.392968] Status code 0; transferred 31/31
[66822.392973] -- transfer complete
[66822.392975] Bulk command transfer result=0
[66822.392977] Attempting to get CSW...
[66822.392979] xfer 13 bytes
[66822.393361] Status code 0; transferred 13/13
[66822.393368] -- transfer complete
[66822.393370] Bulk status result = 0
[66822.393373] Bulk Status S 0x53425355 T 0x3fc09 R 0 Stat 0x1
[66822.393379] -- transport indicates command failure
[66822.393381] Issuing auto-REQUEST_SENSE
[66822.393383] Bulk Command S 0x43425355 T 0x3fc0a L 96 F 128 Trg 0 LUN 1 CL 6
[66822.393389] xfer 31 bytes
[66822.393418] Status code 0; transferred 31/31
[66822.393422] -- transfer complete
[66822.393424] Bulk command transfer result=0
[66822.393426] xfer 96 bytes, 1 entries
[66822.393567] Status code -121; transferred 18/96
[66822.393585] -- short read transfer
[66822.393588] Bulk data transfer result 0x1
[66822.393590] Attempting to get CSW...
[66822.393593] xfer 13 bytes
[66822.393730] Status code -32; transferred 0/13
[66822.393738] clearing endpoint halt for pipe 0xc0008380
[66822.393741] rq=01 rqtype=02 value=0000 index=81 len=0
[66822.394097] result = 0
[66822.394103] Attempting to get CSW (2nd try)...
[66822.394106] xfer 13 bytes
[66822.394135] Status code 0; transferred 13/13
[66822.394139] -- transfer complete
[66822.394143] Bulk status result = 0
[66822.394145] Bulk Status S 0x53425355 T 0x3fc0a R 78 Stat 0x0
[66822.394151] -- Result from auto-sense is 0
[66822.394153] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66822.394159] Not Ready: Medium not present
[66822.394163] scsi cmd done, result=0x2
[66822.394169] *** thread sleeping
[66824.375674] *** thread awakened
[66824.375680] Command TEST_UNIT_READY (6 bytes)
[66824.375685] bytes: 00 00 00 00 00 00
[66824.375690] Bulk Command S 0x43425355 T 0x3fc0b L 0 F 0 Trg 0 LUN 2 CL 6
[66824.375696] xfer 31 bytes
[66824.375825] Status code 0; transferred 31/31
[66824.375832] -- transfer complete
[66824.375835] Bulk command transfer result=0
[66824.375837] Attempting to get CSW...
[66824.375840] xfer 13 bytes
[66824.376000] Status code 0; transferred 13/13
[66824.376003] -- transfer complete
[66824.376005] Bulk status result = 0
[66824.376008] Bulk Status S 0x53425355 T 0x3fc0b R 0 Stat 0x1
[66824.376013] -- transport indicates command failure
[66824.376015] Issuing auto-REQUEST_SENSE
[66824.376018] Bulk Command S 0x43425355 T 0x3fc0c L 96 F 128 Trg 0 LUN 2 CL 6
[66824.376024] xfer 31 bytes
[66824.376094] Status code 0; transferred 31/31
[66824.376097] -- transfer complete
[66824.376099] Bulk command transfer result=0
[66824.376101] xfer 96 bytes, 1 entries
[66824.376252] Status code -121; transferred 18/96
[66824.376256] -- short read transfer
[66824.376258] Bulk data transfer result 0x1
[66824.376260] Attempting to get CSW...
[66824.376262] xfer 13 bytes
[66824.376430] Status code -32; transferred 0/13
[66824.376433] clearing endpoint halt for pipe 0xc0008380
[66824.376436] rq=01 rqtype=02 value=0000 index=81 len=0
[66824.376807] result = 0
[66824.376813] Attempting to get CSW (2nd try)...
[66824.376815] xfer 13 bytes
[66824.376841] Status code 0; transferred 13/13
[66824.376845] -- transfer complete
[66824.376847] Bulk status result = 0
[66824.376850] Bulk Status S 0x53425355 T 0x3fc0c R 78 Stat 0x0
[66824.376855] -- Result from auto-sense is 0
[66824.376857] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66824.376863] Not Ready: Medium not present
[66824.376868] scsi cmd done, result=0x2
[66824.376874] *** thread sleeping
[66824.376918] *** thread awakened
[66824.376922] Command TEST_UNIT_READY (6 bytes)
[66824.376925] bytes: 00 00 00 00 00 00
[66824.376929] Bulk Command S 0x43425355 T 0x3fc0d L 0 F 0 Trg 0 LUN 0 CL 6
[66824.376935] xfer 31 bytes
[66824.376969] Status code 0; transferred 31/31
[66824.376972] -- transfer complete
[66824.376974] Bulk command transfer result=0
[66824.376978] Attempting to get CSW...
[66824.376980] xfer 13 bytes
[66824.377134] Status code 0; transferred 13/13
[66824.377141] -- transfer complete
[66824.377144] Bulk status result = 0
[66824.377146] Bulk Status S 0x53425355 T 0x3fc0d R 0 Stat 0x1
[66824.377152] -- transport indicates command failure
[66824.377154] Issuing auto-REQUEST_SENSE
[66824.377156] Bulk Command S 0x43425355 T 0x3fc0e L 96 F 128 Trg 0 LUN 0 CL 6
[66824.377163] xfer 31 bytes
[66824.377186] Status code 0; transferred 31/31
[66824.377190] -- transfer complete
[66824.377192] Bulk command transfer result=0
[66824.377194] xfer 96 bytes, 1 entries
[66824.377366] Status code -121; transferred 18/96
[66824.377373] -- short read transfer
[66824.377376] Bulk data transfer result 0x1
[66824.377379] Attempting to get CSW...
[66824.377381] xfer 13 bytes
[66824.377525] Status code -32; transferred 0/13
[66824.377533] clearing endpoint halt for pipe 0xc0008380
[66824.377536] rq=01 rqtype=02 value=0000 index=81 len=0
[66824.377899] result = 0
[66824.377905] Attempting to get CSW (2nd try)...
[66824.377907] xfer 13 bytes
[66824.377931] Status code 0; transferred 13/13
[66824.377936] -- transfer complete
[66824.377937] Bulk status result = 0
[66824.377940] Bulk Status S 0x53425355 T 0x3fc0e R 78 Stat 0x0
[66824.377946] -- Result from auto-sense is 0
[66824.377948] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66824.377953] Not Ready: Medium not present
[66824.377957] scsi cmd done, result=0x2
[66824.377964] *** thread sleeping
[66824.439714] *** thread awakened
[66824.439720] Command TEST_UNIT_READY (6 bytes)
[66824.439725] bytes: 00 00 00 00 00 00
[66824.439729] Bulk Command S 0x43425355 T 0x3fc0f L 0 F 0 Trg 0 LUN 3 CL 6
[66824.439736] xfer 31 bytes
[66824.439829] Status code 0; transferred 31/31
[66824.439836] -- transfer complete
[66824.439838] Bulk command transfer result=0
[66824.439840] Attempting to get CSW...
[66824.439842] xfer 13 bytes
[66824.440048] Status code 0; transferred 13/13
[66824.440052] -- transfer complete
[66824.440054] Bulk status result = 0
[66824.440056] Bulk Status S 0x53425355 T 0x3fc0f R 0 Stat 0x1
[66824.440062] -- transport indicates command failure
[66824.440064] Issuing auto-REQUEST_SENSE
[66824.440066] Bulk Command S 0x43425355 T 0x3fc10 L 96 F 128 Trg 0 LUN 3 CL 6
[66824.440073] xfer 31 bytes
[66824.440127] Status code 0; transferred 31/31
[66824.440130] -- transfer complete
[66824.440132] Bulk command transfer result=0
[66824.440135] xfer 96 bytes, 1 entries
[66824.440278] Status code -121; transferred 18/96
[66824.440282] -- short read transfer
[66824.440283] Bulk data transfer result 0x1
[66824.440286] Attempting to get CSW...
[66824.440288] xfer 13 bytes
[66824.440426] Status code -32; transferred 0/13
[66824.440430] clearing endpoint halt for pipe 0xc0008380
[66824.440433] rq=01 rqtype=02 value=0000 index=81 len=0
[66824.440774] result = 0
[66824.440780] Attempting to get CSW (2nd try)...
[66824.440783] xfer 13 bytes
[66824.440810] Status code 0; transferred 13/13
[66824.440814] -- transfer complete
[66824.440816] Bulk status result = 0
[66824.440818] Bulk Status S 0x53425355 T 0x3fc10 R 78 Stat 0x0
[66824.440824] -- Result from auto-sense is 0
[66824.440826] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66824.440834] Not Ready: Medium not present
[66824.440838] scsi cmd done, result=0x2
[66824.440846] *** thread sleeping
[66824.440964] *** thread awakened
[66824.440970] Command TEST_UNIT_READY (6 bytes)
[66824.440974] bytes: 00 00 00 00 00 00
[66824.440978] Bulk Command S 0x43425355 T 0x3fc11 L 0 F 0 Trg 0 LUN 1 CL 6
[66824.440986] xfer 31 bytes
[66824.441013] Status code 0; transferred 31/31
[66824.441017] -- transfer complete
[66824.441019] Bulk command transfer result=0
[66824.441021] Attempting to get CSW...
[66824.441023] xfer 13 bytes
[66824.441408] Status code 0; transferred 13/13
[66824.441416] -- transfer complete
[66824.441418] Bulk status result = 0
[66824.441423] Bulk Status S 0x53425355 T 0x3fc11 R 0 Stat 0x1
[66824.441428] -- transport indicates command failure
[66824.441430] Issuing auto-REQUEST_SENSE
[66824.441433] Bulk Command S 0x43425355 T 0x3fc12 L 96 F 128 Trg 0 LUN 1 CL 6
[66824.441439] xfer 31 bytes
[66824.441466] Status code 0; transferred 31/31
[66824.441470] -- transfer complete
[66824.441472] Bulk command transfer result=0
[66824.441474] xfer 96 bytes, 1 entries
[66824.441643] Status code -121; transferred 18/96
[66824.441650] -- short read transfer
[66824.441652] Bulk data transfer result 0x1
[66824.441655] Attempting to get CSW...
[66824.441657] xfer 13 bytes
[66824.441801] Status code -32; transferred 0/13
[66824.441808] clearing endpoint halt for pipe 0xc0008380
[66824.441811] rq=01 rqtype=02 value=0000 index=81 len=0
[66824.442180] result = 0
[66824.442186] Attempting to get CSW (2nd try)...
[66824.442188] xfer 13 bytes
[66824.442212] Status code 0; transferred 13/13
[66824.442216] -- transfer complete
[66824.442218] Bulk status result = 0
[66824.442221] Bulk Status S 0x53425355 T 0x3fc12 R 78 Stat 0x0
[66824.442226] -- Result from auto-sense is 0
[66824.442229] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66824.442234] Not Ready: Medium not present
[66824.442238] scsi cmd done, result=0x2
[66824.442245] *** thread sleeping
[66826.423652] *** thread awakened
[66826.423658] Command TEST_UNIT_READY (6 bytes)
[66826.423663] bytes: 00 00 00 00 00 00
[66826.423668] Bulk Command S 0x43425355 T 0x3fc13 L 0 F 0 Trg 0 LUN 0 CL 6
[66826.423674] xfer 31 bytes
[66826.423805] Status code 0; transferred 31/31
[66826.423813] -- transfer complete
[66826.423815] Bulk command transfer result=0
[66826.423817] Attempting to get CSW...
[66826.423819] xfer 13 bytes
[66826.423892] Status code 0; transferred 13/13
[66826.423896] -- transfer complete
[66826.423898] Bulk status result = 0
[66826.423900] Bulk Status S 0x53425355 T 0x3fc13 R 0 Stat 0x1
[66826.423905] -- transport indicates command failure
[66826.423908] Issuing auto-REQUEST_SENSE
[66826.423910] Bulk Command S 0x43425355 T 0x3fc14 L 96 F 128 Trg 0 LUN 0 CL 6
[66826.423917] xfer 31 bytes
[66826.423991] Status code 0; transferred 31/31
[66826.423995] -- transfer complete
[66826.423997] Bulk command transfer result=0
[66826.423999] xfer 96 bytes, 1 entries
[66826.424128] Status code -121; transferred 18/96
[66826.424131] -- short read transfer
[66826.424133] Bulk data transfer result 0x1
[66826.424136] Attempting to get CSW...
[66826.424137] xfer 13 bytes
[66826.424299] Status code -32; transferred 0/13
[66826.424302] clearing endpoint halt for pipe 0xc0008380
[66826.424305] rq=01 rqtype=02 value=0000 index=81 len=0
[66826.424669] result = 0
[66826.424675] Attempting to get CSW (2nd try)...
[66826.424677] xfer 13 bytes
[66826.424706] Status code 0; transferred 13/13
[66826.424710] -- transfer complete
[66826.424712] Bulk status result = 0
[66826.424714] Bulk Status S 0x53425355 T 0x3fc14 R 78 Stat 0x0
[66826.424720] -- Result from auto-sense is 0
[66826.424723] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66826.424728] Not Ready: Medium not present
[66826.424732] scsi cmd done, result=0x2
[66826.424739] *** thread sleeping
[66826.424783] *** thread awakened
[66826.424787] Command TEST_UNIT_READY (6 bytes)
[66826.424790] bytes: 00 00 00 00 00 00
[66826.424794] Bulk Command S 0x43425355 T 0x3fc15 L 0 F 0 Trg 0 LUN 2 CL 6
[66826.424800] xfer 31 bytes
[66826.424833] Status code 0; transferred 31/31
[66826.424837] -- transfer complete
[66826.424839] Bulk command transfer result=0
[66826.424841] Attempting to get CSW...
[66826.424843] xfer 13 bytes
[66826.425067] Status code 0; transferred 13/13
[66826.425074] -- transfer complete
[66826.425077] Bulk status result = 0
[66826.425080] Bulk Status S 0x53425355 T 0x3fc15 R 0 Stat 0x1
[66826.425087] -- transport indicates command failure
[66826.425089] Issuing auto-REQUEST_SENSE
[66826.425092] Bulk Command S 0x43425355 T 0x3fc16 L 96 F 128 Trg 0 LUN 2 CL 6
[66826.425098] xfer 31 bytes
[66826.425127] Status code 0; transferred 31/31
[66826.425131] -- transfer complete
[66826.425133] Bulk command transfer result=0
[66826.425135] xfer 96 bytes, 1 entries
[66826.425325] Status code -121; transferred 18/96
[66826.425332] -- short read transfer
[66826.425335] Bulk data transfer result 0x1
[66826.425337] Attempting to get CSW...
[66826.425339] xfer 13 bytes
[66826.425483] Status code -32; transferred 0/13
[66826.425490] clearing endpoint halt for pipe 0xc0008380
[66826.425494] rq=01 rqtype=02 value=0000 index=81 len=0
[66826.425855] result = 0
[66826.425861] Attempting to get CSW (2nd try)...
[66826.425863] xfer 13 bytes
[66826.425892] Status code 0; transferred 13/13
[66826.425899] -- transfer complete
[66826.425901] Bulk status result = 0
[66826.425903] Bulk Status S 0x53425355 T 0x3fc16 R 78 Stat 0x0
[66826.425909] -- Result from auto-sense is 0
[66826.425911] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66826.425917] Not Ready: Medium not present
[66826.425921] scsi cmd done, result=0x2
[66826.425929] *** thread sleeping
[66826.487760] *** thread awakened
[66826.487767] Command TEST_UNIT_READY (6 bytes)
[66826.487771] bytes: 00 00 00 00 00 00
[66826.487776] Bulk Command S 0x43425355 T 0x3fc17 L 0 F 0 Trg 0 LUN 3 CL 6
[66826.487783] xfer 31 bytes
[66826.487849] Status code 0; transferred 31/31
[66826.487853] -- transfer complete
[66826.487855] Bulk command transfer result=0
[66826.487857] Attempting to get CSW...
[66826.487859] xfer 13 bytes
[66826.488110] Status code 0; transferred 13/13
[66826.488113] -- transfer complete
[66826.488115] Bulk status result = 0
[66826.488117] Bulk Status S 0x53425355 T 0x3fc17 R 0 Stat 0x1
[66826.488122] -- transport indicates command failure
[66826.488124] Issuing auto-REQUEST_SENSE
[66826.488127] Bulk Command S 0x43425355 T 0x3fc18 L 96 F 128 Trg 0 LUN 3 CL 6
[66826.488133] xfer 31 bytes
[66826.488189] Status code 0; transferred 31/31
[66826.488192] -- transfer complete
[66826.488194] Bulk command transfer result=0
[66826.488196] xfer 96 bytes, 1 entries
[66826.488341] Status code -121; transferred 18/96
[66826.488345] -- short read transfer
[66826.488347] Bulk data transfer result 0x1
[66826.488349] Attempting to get CSW...
[66826.488351] xfer 13 bytes
[66826.488489] Status code -32; transferred 0/13
[66826.488493] clearing endpoint halt for pipe 0xc0008380
[66826.488495] rq=01 rqtype=02 value=0000 index=81 len=0
[66826.488858] result = 0
[66826.488863] Attempting to get CSW (2nd try)...
[66826.488866] xfer 13 bytes
[66826.488895] Status code 0; transferred 13/13
[66826.488899] -- transfer complete
[66826.488901] Bulk status result = 0
[66826.488904] Bulk Status S 0x53425355 T 0x3fc18 R 78 Stat 0x0
[66826.488910] -- Result from auto-sense is 0
[66826.488912] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66826.488917] Not Ready: Medium not present
[66826.488922] scsi cmd done, result=0x2
[66826.488929] *** thread sleeping
[66826.489046] *** thread awakened
[66826.489052] Command TEST_UNIT_READY (6 bytes)
[66826.489056] bytes: 00 00 00 00 00 00
[66826.489060] Bulk Command S 0x43425355 T 0x3fc19 L 0 F 0 Trg 0 LUN 1 CL 6
[66826.489067] xfer 31 bytes
[66826.489097] Status code 0; transferred 31/31
[66826.489101] -- transfer complete
[66826.489104] Bulk command transfer result=0
[66826.489107] Attempting to get CSW...
[66826.489108] xfer 13 bytes
[66826.489490] Status code 0; transferred 13/13
[66826.489497] -- transfer complete
[66826.489500] Bulk status result = 0
[66826.489502] Bulk Status S 0x53425355 T 0x3fc19 R 0 Stat 0x1
[66826.489508] -- transport indicates command failure
[66826.489510] Issuing auto-REQUEST_SENSE
[66826.489512] Bulk Command S 0x43425355 T 0x3fc1a L 96 F 128 Trg 0 LUN 1 CL 6
[66826.489519] xfer 31 bytes
[66826.489542] Status code 0; transferred 31/31
[66826.489545] -- transfer complete
[66826.489547] Bulk command transfer result=0
[66826.489550] xfer 96 bytes, 1 entries
[66826.489721] Status code -121; transferred 18/96
[66826.489728] -- short read transfer
[66826.489731] Bulk data transfer result 0x1
[66826.489734] Attempting to get CSW...
[66826.489735] xfer 13 bytes
[66826.489879] Status code -32; transferred 0/13
[66826.489886] clearing endpoint halt for pipe 0xc0008380
[66826.489889] rq=01 rqtype=02 value=0000 index=81 len=0
[66826.490252] result = 0
[66826.490258] Attempting to get CSW (2nd try)...
[66826.490260] xfer 13 bytes
[66826.490289] Status code 0; transferred 13/13
[66826.490293] -- transfer complete
[66826.490295] Bulk status result = 0
[66826.490298] Bulk Status S 0x53425355 T 0x3fc1a R 78 Stat 0x0
[66826.490305] -- Result from auto-sense is 0
[66826.490307] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66826.490312] Not Ready: Medium not present
[66826.490316] scsi cmd done, result=0x2
[66826.490323] *** thread sleeping
[66828.471652] *** thread awakened
[66828.471658] Command TEST_UNIT_READY (6 bytes)
[66828.471663] bytes: 00 00 00 00 00 00
[66828.471668] Bulk Command S 0x43425355 T 0x3fc1b L 0 F 0 Trg 0 LUN 2 CL 6
[66828.471674] xfer 31 bytes
[66828.471803] Status code 0; transferred 31/31
[66828.471810] -- transfer complete
[66828.471812] Bulk command transfer result=0
[66828.471815] Attempting to get CSW...
[66828.471817] xfer 13 bytes
[66828.471979] Status code 0; transferred 13/13
[66828.471983] -- transfer complete
[66828.471985] Bulk status result = 0
[66828.471987] Bulk Status S 0x53425355 T 0x3fc1b R 0 Stat 0x1
[66828.471992] -- transport indicates command failure
[66828.471995] Issuing auto-REQUEST_SENSE
[66828.471997] Bulk Command S 0x43425355 T 0x3fc1c L 96 F 128 Trg 0 LUN 2 CL 6
[66828.472004] xfer 31 bytes
[66828.472119] Status code 0; transferred 31/31
[66828.472126] -- transfer complete
[66828.472128] Bulk command transfer result=0
[66828.472131] xfer 96 bytes, 1 entries
[66828.472232] Status code -121; transferred 18/96
[66828.472236] -- short read transfer
[66828.472238] Bulk data transfer result 0x1
[66828.472240] Attempting to get CSW...
[66828.472242] xfer 13 bytes
[66828.472392] Status code -32; transferred 0/13
[66828.472396] clearing endpoint halt for pipe 0xc0008380
[66828.472399] rq=01 rqtype=02 value=0000 index=81 len=0
[66828.472806] result = 0
[66828.472813] Attempting to get CSW (2nd try)...
[66828.472815] xfer 13 bytes
[66828.472919] Status code 0; transferred 13/13
[66828.472926] -- transfer complete
[66828.472929] Bulk status result = 0
[66828.472931] Bulk Status S 0x53425355 T 0x3fc1c R 78 Stat 0x0
[66828.472938] -- Result from auto-sense is 0
[66828.472941] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66828.472946] Not Ready: Medium not present
[66828.472951] scsi cmd done, result=0x2
[66828.472958] *** thread sleeping
[66828.473916] *** thread awakened
[66828.473922] Command TEST_UNIT_READY (6 bytes)
[66828.473927] bytes: 00 00 00 00 00 00
[66828.473931] Bulk Command S 0x43425355 T 0x3fc1d L 0 F 0 Trg 0 LUN 0 CL 6
[66828.473937] xfer 31 bytes
[66828.474057] Status code 0; transferred 31/31
[66828.474065] -- transfer complete
[66828.474067] Bulk command transfer result=0
[66828.474070] Attempting to get CSW...
[66828.474072] xfer 13 bytes
[66828.474145] Status code 0; transferred 13/13
[66828.474148] -- transfer complete
[66828.474150] Bulk status result = 0
[66828.474153] Bulk Status S 0x53425355 T 0x3fc1d R 0 Stat 0x1
[66828.474158] -- transport indicates command failure
[66828.474160] Issuing auto-REQUEST_SENSE
[66828.474162] Bulk Command S 0x43425355 T 0x3fc1e L 96 F 128 Trg 0 LUN 0 CL 6
[66828.474169] xfer 31 bytes
[66828.474243] Status code 0; transferred 31/31
[66828.474246] -- transfer complete
[66828.474248] Bulk command transfer result=0
[66828.474251] xfer 96 bytes, 1 entries
[66828.474376] Status code -121; transferred 18/96
[66828.474380] -- short read transfer
[66828.474382] Bulk data transfer result 0x1
[66828.474384] Attempting to get CSW...
[66828.474386] xfer 13 bytes
[66828.474560] Status code -32; transferred 0/13
[66828.474581] clearing endpoint halt for pipe 0xc0008380
[66828.474584] rq=01 rqtype=02 value=0000 index=81 len=0
[66828.474971] result = 0
[66828.474976] Attempting to get CSW (2nd try)...
[66828.474979] xfer 13 bytes
[66828.475053] Status code 0; transferred 13/13
[66828.475057] -- transfer complete
[66828.475059] Bulk status result = 0
[66828.475062] Bulk Status S 0x53425355 T 0x3fc1e R 78 Stat 0x0
[66828.475068] -- Result from auto-sense is 0
[66828.475070] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66828.475075] Not Ready: Medium not present
[66828.475080] scsi cmd done, result=0x2
[66828.475086] *** thread sleeping
[66828.535781] *** thread awakened
[66828.535787] Command TEST_UNIT_READY (6 bytes)
[66828.535792] bytes: 00 00 00 00 00 00
[66828.535796] Bulk Command S 0x43425355 T 0x3fc1f L 0 F 0 Trg 0 LUN 1 CL 6
[66828.535803] xfer 31 bytes
[66828.535920] Status code 0; transferred 31/31
[66828.535927] -- transfer complete
[66828.535930] Bulk command transfer result=0
[66828.535932] Attempting to get CSW...
[66828.535934] xfer 13 bytes
[66828.536125] Status code 0; transferred 13/13
[66828.536129] -- transfer complete
[66828.536131] Bulk status result = 0
[66828.536133] Bulk Status S 0x53425355 T 0x3fc1f R 0 Stat 0x1
[66828.536138] -- transport indicates command failure
[66828.536140] Issuing auto-REQUEST_SENSE
[66828.536143] Bulk Command S 0x43425355 T 0x3fc20 L 96 F 128 Trg 0 LUN 1 CL 6
[66828.536149] xfer 31 bytes
[66828.536222] Status code 0; transferred 31/31
[66828.536225] -- transfer complete
[66828.536227] Bulk command transfer result=0
[66828.536229] xfer 96 bytes, 1 entries
[66828.536356] Status code -121; transferred 18/96
[66828.536360] -- short read transfer
[66828.536362] Bulk data transfer result 0x1
[66828.536364] Attempting to get CSW...
[66828.536366] xfer 13 bytes
[66828.536531] Status code -32; transferred 0/13
[66828.536534] clearing endpoint halt for pipe 0xc0008380
[66828.536537] rq=01 rqtype=02 value=0000 index=81 len=0
[66828.536940] result = 0
[66828.536945] Attempting to get CSW (2nd try)...
[66828.536948] xfer 13 bytes
[66828.537061] Status code 0; transferred 13/13
[66828.537068] -- transfer complete
[66828.537071] Bulk status result = 0
[66828.537073] Bulk Status S 0x53425355 T 0x3fc20 R 78 Stat 0x0
[66828.537079] -- Result from auto-sense is 0
[66828.537081] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66828.537087] Not Ready: Medium not present
[66828.537091] scsi cmd done, result=0x2
[66828.537099] *** thread sleeping
[66828.537149] *** thread awakened
[66828.537152] Command TEST_UNIT_READY (6 bytes)
[66828.537156] bytes: 00 00 00 00 00 00
[66828.537160] Bulk Command S 0x43425355 T 0x3fc21 L 0 F 0 Trg 0 LUN 3 CL 6
[66828.537166] xfer 31 bytes
[66828.537263] Status code 0; transferred 31/31
[66828.537270] -- transfer complete
[66828.537272] Bulk command transfer result=0
[66828.537276] Attempting to get CSW...
[66828.537278] xfer 13 bytes
[66828.537554] Status code 0; transferred 13/13
[66828.537562] -- transfer complete
[66828.537575] Bulk status result = 0
[66828.537577] Bulk Status S 0x53425355 T 0x3fc21 R 0 Stat 0x1
[66828.537583] -- transport indicates command failure
[66828.537585] Issuing auto-REQUEST_SENSE
[66828.537588] Bulk Command S 0x43425355 T 0x3fc22 L 96 F 128 Trg 0 LUN 3 CL 6
[66828.537593] xfer 31 bytes
[66828.537723] Status code 0; transferred 31/31
[66828.537729] -- transfer complete
[66828.537733] Bulk command transfer result=0
[66828.537735] xfer 96 bytes, 1 entries
[66828.537862] Status code -121; transferred 18/96
[66828.537869] -- short read transfer
[66828.537872] Bulk data transfer result 0x1
[66828.537875] Attempting to get CSW...
[66828.537876] xfer 13 bytes
[66828.538035] Status code -32; transferred 0/13
[66828.538039] clearing endpoint halt for pipe 0xc0008380
[66828.538042] rq=01 rqtype=02 value=0000 index=81 len=0
[66828.538414] result = 0
[66828.538420] Attempting to get CSW (2nd try)...
[66828.538423] xfer 13 bytes
[66828.538531] Status code 0; transferred 13/13
[66828.538538] -- transfer complete
[66828.538541] Bulk status result = 0
[66828.538543] Bulk Status S 0x53425355 T 0x3fc22 R 78 Stat 0x0
[66828.538549] -- Result from auto-sense is 0
[66828.538552] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66828.538557] Not Ready: Medium not present
[66828.538561] scsi cmd done, result=0x2
[66828.538579] *** thread sleeping
[66830.519672] *** thread awakened
[66830.519678] Command TEST_UNIT_READY (6 bytes)
[66830.519683] bytes: 00 00 00 00 00 00
[66830.519687] Bulk Command S 0x43425355 T 0x3fc23 L 0 F 0 Trg 0 LUN 0 CL 6
[66830.519694] xfer 31 bytes
[66830.519803] Status code 0; transferred 31/31
[66830.519811] -- transfer complete
[66830.519813] Bulk command transfer result=0
[66830.519815] Attempting to get CSW...
[66830.519817] xfer 13 bytes
[66830.519881] Status code 0; transferred 13/13
[66830.519884] -- transfer complete
[66830.519886] Bulk status result = 0
[66830.519889] Bulk Status S 0x53425355 T 0x3fc23 R 0 Stat 0x1
[66830.519894] -- transport indicates command failure
[66830.519896] Issuing auto-REQUEST_SENSE
[66830.519899] Bulk Command S 0x43425355 T 0x3fc24 L 96 F 128 Trg 0 LUN 0 CL 6
[66830.519905] xfer 31 bytes
[66830.519971] Status code 0; transferred 31/31
[66830.519974] -- transfer complete
[66830.519976] Bulk command transfer result=0
[66830.519978] xfer 96 bytes, 1 entries
[66830.520117] Status code -121; transferred 18/96
[66830.520121] -- short read transfer
[66830.520123] Bulk data transfer result 0x1
[66830.520125] Attempting to get CSW...
[66830.520127] xfer 13 bytes
[66830.520278] Status code -32; transferred 0/13
[66830.520282] clearing endpoint halt for pipe 0xc0008380
[66830.520285] rq=01 rqtype=02 value=0000 index=81 len=0
[66830.520638] result = 0
[66830.520641] Attempting to get CSW (2nd try)...
[66830.520643] xfer 13 bytes
[66830.520727] Status code 0; transferred 13/13
[66830.520734] -- transfer complete
[66830.520737] Bulk status result = 0
[66830.520739] Bulk Status S 0x53425355 T 0x3fc24 R 78 Stat 0x0
[66830.520745] -- Result from auto-sense is 0
[66830.520748] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66830.520753] Not Ready: Medium not present
[66830.520758] scsi cmd done, result=0x2
[66830.520766] *** thread sleeping
[66830.520815] *** thread awakened
[66830.520818] Command TEST_UNIT_READY (6 bytes)
[66830.520821] bytes: 00 00 00 00 00 00
[66830.520825] Bulk Command S 0x43425355 T 0x3fc25 L 0 F 0 Trg 0 LUN 2 CL 6
[66830.520832] xfer 31 bytes
[66830.520938] Status code 0; transferred 31/31
[66830.520945] -- transfer complete
[66830.520948] Bulk command transfer result=0
[66830.520950] Attempting to get CSW...
[66830.520952] xfer 13 bytes
[66830.521159] Status code 0; transferred 13/13
[66830.521166] -- transfer complete
[66830.521170] Bulk status result = 0
[66830.521173] Bulk Status S 0x53425355 T 0x3fc25 R 0 Stat 0x1
[66830.521178] -- transport indicates command failure
[66830.521180] Issuing auto-REQUEST_SENSE
[66830.521183] Bulk Command S 0x43425355 T 0x3fc26 L 96 F 128 Trg 0 LUN 2 CL 6
[66830.521189] xfer 31 bytes
[66830.521315] Status code 0; transferred 31/31
[66830.521323] -- transfer complete
[66830.521325] Bulk command transfer result=0
[66830.521328] xfer 96 bytes, 1 entries
[66830.521475] Status code -121; transferred 18/96
[66830.521482] -- short read transfer
[66830.521484] Bulk data transfer result 0x1
[66830.521487] Attempting to get CSW...
[66830.521489] xfer 13 bytes
[66830.521692] Status code -32; transferred 0/13
[66830.521699] clearing endpoint halt for pipe 0xc0008380
[66830.521703] rq=01 rqtype=02 value=0000 index=81 len=0
[66830.522096] result = 0
[66830.522102] Attempting to get CSW (2nd try)...
[66830.522104] xfer 13 bytes
[66830.522210] Status code 0; transferred 13/13
[66830.522216] -- transfer complete
[66830.522219] Bulk status result = 0
[66830.522221] Bulk Status S 0x53425355 T 0x3fc26 R 78 Stat 0x0
[66830.522227] -- Result from auto-sense is 0
[66830.522230] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66830.522235] Not Ready: Medium not present
[66830.522239] scsi cmd done, result=0x2
[66830.522246] *** thread sleeping
[66830.583769] *** thread awakened
[66830.583775] Command TEST_UNIT_READY (6 bytes)
[66830.583780] bytes: 00 00 00 00 00 00
[66830.583785] Bulk Command S 0x43425355 T 0x3fc27 L 0 F 0 Trg 0 LUN 3 CL 6
[66830.583791] xfer 31 bytes
[66830.583872] Status code 0; transferred 31/31
[66830.583876] -- transfer complete
[66830.583879] Bulk command transfer result=0
[66830.583881] Attempting to get CSW...
[66830.583883] xfer 13 bytes
[66830.583999] Status code 0; transferred 13/13
[66830.584003] -- transfer complete
[66830.584004] Bulk status result = 0
[66830.584007] Bulk Status S 0x53425355 T 0x3fc27 R 0 Stat 0x1
[66830.584011] -- transport indicates command failure
[66830.584014] Issuing auto-REQUEST_SENSE
[66830.584016] Bulk Command S 0x43425355 T 0x3fc28 L 96 F 128 Trg 0 LUN 3 CL 6
[66830.584021] xfer 31 bytes
[66830.584094] Status code 0; transferred 31/31
[66830.584097] -- transfer complete
[66830.584099] Bulk command transfer result=0
[66830.584101] xfer 96 bytes, 1 entries
[66830.584231] Status code -121; transferred 18/96
[66830.584234] -- short read transfer
[66830.584236] Bulk data transfer result 0x1
[66830.584238] Attempting to get CSW...
[66830.584240] xfer 13 bytes
[66830.584417] Status code -32; transferred 0/13
[66830.584421] clearing endpoint halt for pipe 0xc0008380
[66830.584423] rq=01 rqtype=02 value=0000 index=81 len=0
[66830.584824] result = 0
[66830.584829] Attempting to get CSW (2nd try)...
[66830.584832] xfer 13 bytes
[66830.584951] Status code 0; transferred 13/13
[66830.584958] -- transfer complete
[66830.584960] Bulk status result = 0
[66830.584963] Bulk Status S 0x53425355 T 0x3fc28 R 78 Stat 0x0
[66830.584969] -- Result from auto-sense is 0
[66830.584971] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66830.584978] Not Ready: Medium not present
[66830.584982] scsi cmd done, result=0x2
[66830.584990] *** thread sleeping
[66830.585038] *** thread awakened
[66830.585042] Command TEST_UNIT_READY (6 bytes)
[66830.585045] bytes: 00 00 00 00 00 00
[66830.585049] Bulk Command S 0x43425355 T 0x3fc29 L 0 F 0 Trg 0 LUN 1 CL 6
[66830.585056] xfer 31 bytes
[66830.585160] Status code 0; transferred 31/31
[66830.585167] -- transfer complete
[66830.585170] Bulk command transfer result=0
[66830.585172] Attempting to get CSW...
[66830.585174] xfer 13 bytes
[66830.585536] Status code 0; transferred 13/13
[66830.585543] -- transfer complete
[66830.585546] Bulk status result = 0
[66830.585548] Bulk Status S 0x53425355 T 0x3fc29 R 0 Stat 0x1
[66830.585553] -- transport indicates command failure
[66830.585555] Issuing auto-REQUEST_SENSE
[66830.585558] Bulk Command S 0x43425355 T 0x3fc2a L 96 F 128 Trg 0 LUN 1 CL 6
[66830.585576] xfer 31 bytes
[66830.585693] Status code 0; transferred 31/31
[66830.585700] -- transfer complete
[66830.585702] Bulk command transfer result=0
[66830.585705] xfer 96 bytes, 1 entries
[66830.585832] Status code -121; transferred 18/96
[66830.585839] -- short read transfer
[66830.585841] Bulk data transfer result 0x1
[66830.585844] Attempting to get CSW...
[66830.585846] xfer 13 bytes
[66830.586038] Status code -32; transferred 0/13
[66830.586045] clearing endpoint halt for pipe 0xc0008380
[66830.586048] rq=01 rqtype=02 value=0000 index=81 len=0
[66830.586431] result = 0
[66830.586437] Attempting to get CSW (2nd try)...
[66830.586439] xfer 13 bytes
[66830.586489] Status code 0; transferred 13/13
[66830.586494] -- transfer complete
[66830.586496] Bulk status result = 0
[66830.586498] Bulk Status S 0x53425355 T 0x3fc2a R 78 Stat 0x0
[66830.586504] -- Result from auto-sense is 0
[66830.586506] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66830.586512] Not Ready: Medium not present
[66830.586516] scsi cmd done, result=0x2
[66830.586523] *** thread sleeping
[66832.567705] *** thread awakened
[66832.567712] Command TEST_UNIT_READY (6 bytes)
[66832.567716] bytes: 00 00 00 00 00 00
[66832.567721] Bulk Command S 0x43425355 T 0x3fc2b L 0 F 0 Trg 0 LUN 2 CL 6
[66832.567728] xfer 31 bytes
[66832.567857] Status code 0; transferred 31/31
[66832.567864] -- transfer complete
[66832.567867] Bulk command transfer result=0
[66832.567869] Attempting to get CSW...
[66832.567871] xfer 13 bytes
[66832.568021] Status code 0; transferred 13/13
[66832.568024] -- transfer complete
[66832.568026] Bulk status result = 0
[66832.568029] Bulk Status S 0x53425355 T 0x3fc2b R 0 Stat 0x1
[66832.568034] -- transport indicates command failure
[66832.568036] Issuing auto-REQUEST_SENSE
[66832.568038] Bulk Command S 0x43425355 T 0x3fc2c L 96 F 128 Trg 0 LUN 2 CL 6
[66832.568045] xfer 31 bytes
[66832.568115] Status code 0; transferred 31/31
[66832.568119] -- transfer complete
[66832.568120] Bulk command transfer result=0
[66832.568123] xfer 96 bytes, 1 entries
[66832.568268] Status code -121; transferred 18/96
[66832.568271] -- short read transfer
[66832.568273] Bulk data transfer result 0x1
[66832.568276] Attempting to get CSW...
[66832.568278] xfer 13 bytes
[66832.568438] Status code -32; transferred 0/13
[66832.568442] clearing endpoint halt for pipe 0xc0008380
[66832.568445] rq=01 rqtype=02 value=0000 index=81 len=0
[66832.568849] result = 0
[66832.568855] Attempting to get CSW (2nd try)...
[66832.568858] xfer 13 bytes
[66832.568962] Status code 0; transferred 13/13
[66832.568969] -- transfer complete
[66832.568971] Bulk status result = 0
[66832.568974] Bulk Status S 0x53425355 T 0x3fc2c R 78 Stat 0x0
[66832.568980] -- Result from auto-sense is 0
[66832.568982] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66832.568988] Not Ready: Medium not present
[66832.568993] scsi cmd done, result=0x2
[66832.569000] *** thread sleeping
[66832.569090] *** thread awakened
[66832.569096] Command TEST_UNIT_READY (6 bytes)
[66832.569100] bytes: 00 00 00 00 00 00
[66832.569104] Bulk Command S 0x43425355 T 0x3fc2d L 0 F 0 Trg 0 LUN 0 CL 6
[66832.569110] xfer 31 bytes
[66832.569214] Status code 0; transferred 31/31
[66832.569221] -- transfer complete
[66832.569223] Bulk command transfer result=0
[66832.569226] Attempting to get CSW...
[66832.569228] xfer 13 bytes
[66832.569330] Status code 0; transferred 13/13
[66832.569337] -- transfer complete
[66832.569340] Bulk status result = 0
[66832.569342] Bulk Status S 0x53425355 T 0x3fc2d R 0 Stat 0x1
[66832.569348] -- transport indicates command failure
[66832.569351] Issuing auto-REQUEST_SENSE
[66832.569353] Bulk Command S 0x43425355 T 0x3fc2e L 96 F 128 Trg 0 LUN 0 CL 6
[66832.569359] xfer 31 bytes
[66832.569465] Status code 0; transferred 31/31
[66832.569472] -- transfer complete
[66832.569475] Bulk command transfer result=0
[66832.569478] xfer 96 bytes, 1 entries
[66832.569605] Status code -121; transferred 18/96
[66832.569613] -- short read transfer
[66832.569617] Bulk data transfer result 0x1
[66832.569620] Attempting to get CSW...
[66832.569622] xfer 13 bytes
[66832.569761] Status code -32; transferred 0/13
[66832.569765] clearing endpoint halt for pipe 0xc0008380
[66832.569768] rq=01 rqtype=02 value=0000 index=81 len=0
[66832.570111] result = 0
[66832.570114] Attempting to get CSW (2nd try)...
[66832.570116] xfer 13 bytes
[66832.570164] Status code 0; transferred 13/13
[66832.570168] -- transfer complete
[66832.570170] Bulk status result = 0
[66832.570172] Bulk Status S 0x53425355 T 0x3fc2e R 78 Stat 0x0
[66832.570178] -- Result from auto-sense is 0
[66832.570180] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66832.570186] Not Ready: Medium not present
[66832.570190] scsi cmd done, result=0x2
[66832.570196] *** thread sleeping
[66832.631723] *** thread awakened
[66832.631729] Command TEST_UNIT_READY (6 bytes)
[66832.631734] bytes: 00 00 00 00 00 00
[66832.631738] Bulk Command S 0x43425355 T 0x3fc2f L 0 F 0 Trg 0 LUN 1 CL 6
[66832.631745] xfer 31 bytes
[66832.631873] Status code 0; transferred 31/31
[66832.631880] -- transfer complete
[66832.631882] Bulk command transfer result=0
[66832.631885] Attempting to get CSW...
[66832.631887] xfer 13 bytes
[66832.632064] Status code 0; transferred 13/13
[66832.632068] -- transfer complete
[66832.632070] Bulk status result = 0
[66832.632072] Bulk Status S 0x53425355 T 0x3fc2f R 0 Stat 0x1
[66832.632077] -- transport indicates command failure
[66832.632079] Issuing auto-REQUEST_SENSE
[66832.632082] Bulk Command S 0x43425355 T 0x3fc30 L 96 F 128 Trg 0 LUN 1 CL 6
[66832.632088] xfer 31 bytes
[66832.632163] Status code 0; transferred 31/31
[66832.632167] -- transfer complete
[66832.632169] Bulk command transfer result=0
[66832.632171] xfer 96 bytes, 1 entries
[66832.632288] Status code -121; transferred 18/96
[66832.632291] -- short read transfer
[66832.632293] Bulk data transfer result 0x1
[66832.632296] Attempting to get CSW...
[66832.632297] xfer 13 bytes
[66832.632464] Status code -32; transferred 0/13
[66832.632467] clearing endpoint halt for pipe 0xc0008380
[66832.632470] rq=01 rqtype=02 value=0000 index=81 len=0
[66832.632874] result = 0
[66832.632880] Attempting to get CSW (2nd try)...
[66832.632883] xfer 13 bytes
[66832.633006] Status code 0; transferred 13/13
[66832.633013] -- transfer complete
[66832.633015] Bulk status result = 0
[66832.633019] Bulk Status S 0x53425355 T 0x3fc30 R 78 Stat 0x0
[66832.633025] -- Result from auto-sense is 0
[66832.633027] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66832.633033] Not Ready: Medium not present
[66832.633037] scsi cmd done, result=0x2
[66832.633045] *** thread sleeping
[66832.633129] *** thread awakened
[66832.633134] Command TEST_UNIT_READY (6 bytes)
[66832.633139] bytes: 00 00 00 00 00 00
[66832.633143] Bulk Command S 0x43425355 T 0x3fc31 L 0 F 0 Trg 0 LUN 3 CL 6
[66832.633149] xfer 31 bytes
[66832.633272] Status code 0; transferred 31/31
[66832.633280] -- transfer complete
[66832.633282] Bulk command transfer result=0
[66832.633284] Attempting to get CSW...
[66832.633287] xfer 13 bytes
[66832.633508] Status code 0; transferred 13/13
[66832.633516] -- transfer complete
[66832.633518] Bulk status result = 0
[66832.633521] Bulk Status S 0x53425355 T 0x3fc31 R 0 Stat 0x1
[66832.633527] -- transport indicates command failure
[66832.633529] Issuing auto-REQUEST_SENSE
[66832.633531] Bulk Command S 0x43425355 T 0x3fc32 L 96 F 128 Trg 0 LUN 3 CL 6
[66832.633538] xfer 31 bytes
[66832.633641] Status code 0; transferred 31/31
[66832.633648] -- transfer complete
[66832.633651] Bulk command transfer result=0
[66832.633654] xfer 96 bytes, 1 entries
[66832.633784] Status code -121; transferred 18/96
[66832.633791] -- short read transfer
[66832.633793] Bulk data transfer result 0x1
[66832.633796] Attempting to get CSW...
[66832.633798] xfer 13 bytes
[66832.633936] Status code -32; transferred 0/13
[66832.633940] clearing endpoint halt for pipe 0xc0008380
[66832.633943] rq=01 rqtype=02 value=0000 index=81 len=0
[66832.634310] result = 0
[66832.634315] Attempting to get CSW (2nd try)...
[66832.634318] xfer 13 bytes
[66832.634433] Status code 0; transferred 13/13
[66832.634440] -- transfer complete
[66832.634442] Bulk status result = 0
[66832.634445] Bulk Status S 0x53425355 T 0x3fc32 R 78 Stat 0x0
[66832.634451] -- Result from auto-sense is 0
[66832.634454] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66832.634459] Not Ready: Medium not present
[66832.634463] scsi cmd done, result=0x2
[66832.634470] *** thread sleeping
[66834.615792] *** thread awakened
[66834.615798] Command TEST_UNIT_READY (6 bytes)
[66834.615803] bytes: 00 00 00 00 00 00
[66834.615807] Bulk Command S 0x43425355 T 0x3fc33 L 0 F 0 Trg 0 LUN 0 CL 6
[66834.615814] xfer 31 bytes
[66834.615907] Status code 0; transferred 31/31
[66834.615914] -- transfer complete
[66834.615917] Bulk command transfer result=0
[66834.615919] Attempting to get CSW...
[66834.615921] xfer 13 bytes
[66834.615979] Status code 0; transferred 13/13
[66834.615983] -- transfer complete
[66834.615985] Bulk status result = 0
[66834.615987] Bulk Status S 0x53425355 T 0x3fc33 R 0 Stat 0x1
[66834.615992] -- transport indicates command failure
[66834.615995] Issuing auto-REQUEST_SENSE
[66834.615997] Bulk Command S 0x43425355 T 0x3fc34 L 96 F 128 Trg 0 LUN 0 CL 6
[66834.616003] xfer 31 bytes
[66834.616057] Status code 0; transferred 31/31
[66834.616060] -- transfer complete
[66834.616062] Bulk command transfer result=0
[66834.616065] xfer 96 bytes, 1 entries
[66834.616186] Status code -121; transferred 18/96
[66834.616190] -- short read transfer
[66834.616192] Bulk data transfer result 0x1
[66834.616194] Attempting to get CSW...
[66834.616196] xfer 13 bytes
[66834.616336] Status code -32; transferred 0/13
[66834.616340] clearing endpoint halt for pipe 0xc0008380
[66834.616343] rq=01 rqtype=02 value=0000 index=81 len=0
[66834.616768] result = 0
[66834.616774] Attempting to get CSW (2nd try)...
[66834.616777] xfer 13 bytes
[66834.616902] Status code 0; transferred 13/13
[66834.616909] -- transfer complete
[66834.616911] Bulk status result = 0
[66834.616915] Bulk Status S 0x53425355 T 0x3fc34 R 78 Stat 0x0
[66834.616921] -- Result from auto-sense is 0
[66834.616924] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66834.616929] Not Ready: Medium not present
[66834.616933] scsi cmd done, result=0x2
[66834.616941] *** thread sleeping
[66834.617027] *** thread awakened
[66834.617033] Command TEST_UNIT_READY (6 bytes)
[66834.617037] bytes: 00 00 00 00 00 00
[66834.617041] Bulk Command S 0x43425355 T 0x3fc35 L 0 F 0 Trg 0 LUN 2 CL 6
[66834.617048] xfer 31 bytes
[66834.617173] Status code 0; transferred 31/31
[66834.617180] -- transfer complete
[66834.617183] Bulk command transfer result=0
[66834.617186] Attempting to get CSW...
[66834.617188] xfer 13 bytes
[66834.617388] Status code 0; transferred 13/13
[66834.617395] -- transfer complete
[66834.617397] Bulk status result = 0
[66834.617400] Bulk Status S 0x53425355 T 0x3fc35 R 0 Stat 0x1
[66834.617405] -- transport indicates command failure
[66834.617408] Issuing auto-REQUEST_SENSE
[66834.617411] Bulk Command S 0x43425355 T 0x3fc36 L 96 F 128 Trg 0 LUN 2 CL 6
[66834.617417] xfer 31 bytes
[66834.617541] Status code 0; transferred 31/31
[66834.617548] -- transfer complete
[66834.617550] Bulk command transfer result=0
[66834.617553] xfer 96 bytes, 1 entries
[66834.617677] Status code -121; transferred 18/96
[66834.617685] -- short read transfer
[66834.617687] Bulk data transfer result 0x1
[66834.617690] Attempting to get CSW...
[66834.617692] xfer 13 bytes
[66834.617850] Status code -32; transferred 0/13
[66834.617855] clearing endpoint halt for pipe 0xc0008380
[66834.617858] rq=01 rqtype=02 value=0000 index=81 len=0
[66834.618216] result = 0
[66834.618219] Attempting to get CSW (2nd try)...
[66834.618221] xfer 13 bytes
[66834.618276] Status code 0; transferred 13/13
[66834.618280] -- transfer complete
[66834.618282] Bulk status result = 0
[66834.618284] Bulk Status S 0x53425355 T 0x3fc36 R 78 Stat 0x0
[66834.618290] -- Result from auto-sense is 0
[66834.618292] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66834.618297] Not Ready: Medium not present
[66834.618302] scsi cmd done, result=0x2
[66834.618308] *** thread sleeping
[66834.679762] *** thread awakened
[66834.679768] Command TEST_UNIT_READY (6 bytes)
[66834.679773] bytes: 00 00 00 00 00 00
[66834.679778] Bulk Command S 0x43425355 T 0x3fc37 L 0 F 0 Trg 0 LUN 3 CL 6
[66834.679785] xfer 31 bytes
[66834.679866] Status code 0; transferred 31/31
[66834.679870] -- transfer complete
[66834.679872] Bulk command transfer result=0
[66834.679874] Attempting to get CSW...
[66834.679876] xfer 13 bytes
[66834.679999] Status code 0; transferred 13/13
[66834.680002] -- transfer complete
[66834.680004] Bulk status result = 0
[66834.680006] Bulk Status S 0x53425355 T 0x3fc37 R 0 Stat 0x1
[66834.680011] -- transport indicates command failure
[66834.680013] Issuing auto-REQUEST_SENSE
[66834.680016] Bulk Command S 0x43425355 T 0x3fc38 L 96 F 128 Trg 0 LUN 3 CL 6
[66834.680022] xfer 31 bytes
[66834.680094] Status code 0; transferred 31/31
[66834.680097] -- transfer complete
[66834.680099] Bulk command transfer result=0
[66834.680101] xfer 96 bytes, 1 entries
[66834.680252] Status code -121; transferred 18/96
[66834.680256] -- short read transfer
[66834.680258] Bulk data transfer result 0x1
[66834.680260] Attempting to get CSW...
[66834.680262] xfer 13 bytes
[66834.680429] Status code -32; transferred 0/13
[66834.680432] clearing endpoint halt for pipe 0xc0008380
[66834.680435] rq=01 rqtype=02 value=0000 index=81 len=0
[66834.680839] result = 0
[66834.680845] Attempting to get CSW (2nd try)...
[66834.680847] xfer 13 bytes
[66834.680970] Status code 0; transferred 13/13
[66834.680977] -- transfer complete
[66834.680981] Bulk status result = 0
[66834.680984] Bulk Status S 0x53425355 T 0x3fc38 R 78 Stat 0x0
[66834.680989] -- Result from auto-sense is 0
[66834.680992] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66834.680997] Not Ready: Medium not present
[66834.681002] scsi cmd done, result=0x2
[66834.681011] *** thread sleeping
[66834.681130] *** thread awakened
[66834.681135] Command TEST_UNIT_READY (6 bytes)
[66834.681140] bytes: 00 00 00 00 00 00
[66834.681144] Bulk Command S 0x43425355 T 0x3fc39 L 0 F 0 Trg 0 LUN 1 CL 6
[66834.681150] xfer 31 bytes
[66834.681281] Status code 0; transferred 31/31
[66834.681288] -- transfer complete
[66834.681292] Bulk command transfer result=0
[66834.681294] Attempting to get CSW...
[66834.681296] xfer 13 bytes
[66834.681640] Status code 0; transferred 13/13
[66834.681646] -- transfer complete
[66834.681649] Bulk status result = 0
[66834.681651] Bulk Status S 0x53425355 T 0x3fc39 R 0 Stat 0x1
[66834.681657] -- transport indicates command failure
[66834.681659] Issuing auto-REQUEST_SENSE
[66834.681661] Bulk Command S 0x43425355 T 0x3fc3a L 96 F 128 Trg 0 LUN 1 CL 6
[66834.681668] xfer 31 bytes
[66834.681796] Status code 0; transferred 31/31
[66834.681803] -- transfer complete
[66834.681805] Bulk command transfer result=0
[66834.681809] xfer 96 bytes, 1 entries
[66834.681938] Status code -121; transferred 18/96
[66834.681945] -- short read transfer
[66834.681947] Bulk data transfer result 0x1
[66834.681950] Attempting to get CSW...
[66834.681952] xfer 13 bytes
[66834.682157] Status code -32; transferred 0/13
[66834.682164] clearing endpoint halt for pipe 0xc0008380
[66834.682167] rq=01 rqtype=02 value=0000 index=81 len=0
[66834.682528] result = 0
[66834.682531] Attempting to get CSW (2nd try)...
[66834.682533] xfer 13 bytes
[66834.682649] Status code 0; transferred 13/13
[66834.682656] -- transfer complete
[66834.682658] Bulk status result = 0
[66834.682661] Bulk Status S 0x53425355 T 0x3fc3a R 78 Stat 0x0
[66834.682667] -- Result from auto-sense is 0
[66834.682669] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66834.682675] Not Ready: Medium not present
[66834.682679] scsi cmd done, result=0x2
[66834.682686] *** thread sleeping
[66836.663653] *** thread awakened
[66836.663659] Command TEST_UNIT_READY (6 bytes)
[66836.663664] bytes: 00 00 00 00 00 00
[66836.663668] Bulk Command S 0x43425355 T 0x3fc3b L 0 F 0 Trg 0 LUN 2 CL 6
[66836.663675] xfer 31 bytes
[66836.663770] Status code 0; transferred 31/31
[66836.663777] -- transfer complete
[66836.663779] Bulk command transfer result=0
[66836.663782] Attempting to get CSW...
[66836.663784] xfer 13 bytes
[66836.664015] Status code 0; transferred 13/13
[66836.664023] -- transfer complete
[66836.664025] Bulk status result = 0
[66836.664028] Bulk Status S 0x53425355 T 0x3fc3b R 0 Stat 0x1
[66836.664034] -- transport indicates command failure
[66836.664036] Issuing auto-REQUEST_SENSE
[66836.664039] Bulk Command S 0x43425355 T 0x3fc3c L 96 F 128 Trg 0 LUN 2 CL 6
[66836.664046] xfer 31 bytes
[66836.664107] Status code 0; transferred 31/31
[66836.664111] -- transfer complete
[66836.664112] Bulk command transfer result=0
[66836.664115] xfer 96 bytes, 1 entries
[66836.664280] Status code -121; transferred 18/96
[66836.664284] -- short read transfer
[66836.664286] Bulk data transfer result 0x1
[66836.664288] Attempting to get CSW...
[66836.664290] xfer 13 bytes
[66836.664430] Status code -32; transferred 0/13
[66836.664433] clearing endpoint halt for pipe 0xc0008380
[66836.664436] rq=01 rqtype=02 value=0000 index=81 len=0
[66836.664841] result = 0
[66836.664847] Attempting to get CSW (2nd try)...
[66836.664850] xfer 13 bytes
[66836.664974] Status code 0; transferred 13/13
[66836.664981] -- transfer complete
[66836.664983] Bulk status result = 0
[66836.664985] Bulk Status S 0x53425355 T 0x3fc3c R 78 Stat 0x0
[66836.664991] -- Result from auto-sense is 0
[66836.664995] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66836.665001] Not Ready: Medium not present
[66836.665006] scsi cmd done, result=0x2
[66836.665014] *** thread sleeping
[66836.665102] *** thread awakened
[66836.665108] Command TEST_UNIT_READY (6 bytes)
[66836.665113] bytes: 00 00 00 00 00 00
[66836.665117] Bulk Command S 0x43425355 T 0x3fc3d L 0 F 0 Trg 0 LUN 0 CL 6
[66836.665124] xfer 31 bytes
[66836.665245] Status code 0; transferred 31/31
[66836.665252] -- transfer complete
[66836.665254] Bulk command transfer result=0
[66836.665257] Attempting to get CSW...
[66836.665259] xfer 13 bytes
[66836.665381] Status code 0; transferred 13/13
[66836.665388] -- transfer complete
[66836.665391] Bulk status result = 0
[66836.665395] Bulk Status S 0x53425355 T 0x3fc3d R 0 Stat 0x1
[66836.665401] -- transport indicates command failure
[66836.665403] Issuing auto-REQUEST_SENSE
[66836.665405] Bulk Command S 0x43425355 T 0x3fc3e L 96 F 128 Trg 0 LUN 0 CL 6
[66836.665412] xfer 31 bytes
[66836.665536] Status code 0; transferred 31/31
[66836.665543] -- transfer complete
[66836.665545] Bulk command transfer result=0
[66836.665548] xfer 96 bytes, 1 entries
[66836.665675] Status code -121; transferred 18/96
[66836.665683] -- short read transfer
[66836.665685] Bulk data transfer result 0x1
[66836.665688] Attempting to get CSW...
[66836.665690] xfer 13 bytes
[66836.665882] Status code -32; transferred 0/13
[66836.665890] clearing endpoint halt for pipe 0xc0008380
[66836.665893] rq=01 rqtype=02 value=0000 index=81 len=0
[66836.666235] result = 0
[66836.666238] Attempting to get CSW (2nd try)...
[66836.666240] xfer 13 bytes
[66836.666294] Status code 0; transferred 13/13
[66836.666298] -- transfer complete
[66836.666300] Bulk status result = 0
[66836.666302] Bulk Status S 0x53425355 T 0x3fc3e R 78 Stat 0x0
[66836.666308] -- Result from auto-sense is 0
[66836.666310] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66836.666316] Not Ready: Medium not present
[66836.666320] scsi cmd done, result=0x2
[66836.666326] *** thread sleeping
[66836.727653] *** thread awakened
[66836.727660] Command TEST_UNIT_READY (6 bytes)
[66836.727664] bytes: 00 00 00 00 00 00
[66836.727669] Bulk Command S 0x43425355 T 0x3fc3f L 0 F 0 Trg 0 LUN 3 CL 6
[66836.727675] xfer 31 bytes
[66836.727784] Status code 0; transferred 31/31
[66836.727791] -- transfer complete
[66836.727793] Bulk command transfer result=0
[66836.727796] Attempting to get CSW...
[66836.727798] xfer 13 bytes
[66836.727991] Status code 0; transferred 13/13
[66836.727995] -- transfer complete
[66836.727997] Bulk status result = 0
[66836.727999] Bulk Status S 0x53425355 T 0x3fc3f R 0 Stat 0x1
[66836.728004] -- transport indicates command failure
[66836.728006] Issuing auto-REQUEST_SENSE
[66836.728009] Bulk Command S 0x43425355 T 0x3fc40 L 96 F 128 Trg 0 LUN 3 CL 6
[66836.728015] xfer 31 bytes
[66836.728075] Status code 0; transferred 31/31
[66836.728079] -- transfer complete
[66836.728081] Bulk command transfer result=0
[66836.728083] xfer 96 bytes, 1 entries
[66836.728221] Status code -121; transferred 18/96
[66836.728224] -- short read transfer
[66836.728226] Bulk data transfer result 0x1
[66836.728229] Attempting to get CSW...
[66836.728230] xfer 13 bytes
[66836.728401] Status code -32; transferred 0/13
[66836.728404] clearing endpoint halt for pipe 0xc0008380
[66836.728407] rq=01 rqtype=02 value=0000 index=81 len=0
[66836.728811] result = 0
[66836.728817] Attempting to get CSW (2nd try)...
[66836.728819] xfer 13 bytes
[66836.728942] Status code 0; transferred 13/13
[66836.728949] -- transfer complete
[66836.728952] Bulk status result = 0
[66836.728954] Bulk Status S 0x53425355 T 0x3fc40 R 78 Stat 0x0
[66836.728962] -- Result from auto-sense is 0
[66836.728964] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66836.728970] Not Ready: Medium not present
[66836.728974] scsi cmd done, result=0x2
[66836.728982] *** thread sleeping
[66836.729105] *** thread awakened
[66836.729111] Command TEST_UNIT_READY (6 bytes)
[66836.729115] bytes: 00 00 00 00 00 00
[66836.729119] Bulk Command S 0x43425355 T 0x3fc41 L 0 F 0 Trg 0 LUN 1 CL 6
[66836.729126] xfer 31 bytes
[66836.729252] Status code 0; transferred 31/31
[66836.729259] -- transfer complete
[66836.729262] Bulk command transfer result=0
[66836.729265] Attempting to get CSW...
[66836.729267] xfer 13 bytes
[66836.729599] Status code 0; transferred 13/13
[66836.729606] -- transfer complete
[66836.729609] Bulk status result = 0
[66836.729612] Bulk Status S 0x53425355 T 0x3fc41 R 0 Stat 0x1
[66836.729617] -- transport indicates command failure
[66836.729619] Issuing auto-REQUEST_SENSE
[66836.729621] Bulk Command S 0x43425355 T 0x3fc42 L 96 F 128 Trg 0 LUN 1 CL 6
[66836.729628] xfer 31 bytes
[66836.729754] Status code 0; transferred 31/31
[66836.729761] -- transfer complete
[66836.729764] Bulk command transfer result=0
[66836.729766] xfer 96 bytes, 1 entries
[66836.729907] Status code -121; transferred 18/96
[66836.729914] -- short read transfer
[66836.729917] Bulk data transfer result 0x1
[66836.729919] Attempting to get CSW...
[66836.729921] xfer 13 bytes
[66836.730098] Status code -32; transferred 0/13
[66836.730103] clearing endpoint halt for pipe 0xc0008380
[66836.730106] rq=01 rqtype=02 value=0000 index=81 len=0
[66836.730466] result = 0
[66836.730469] Attempting to get CSW (2nd try)...
[66836.730471] xfer 13 bytes
[66836.730577] Status code 0; transferred 13/13
[66836.730584] -- transfer complete
[66836.730586] Bulk status result = 0
[66836.730590] Bulk Status S 0x53425355 T 0x3fc42 R 78 Stat 0x0
[66836.730596] -- Result from auto-sense is 0
[66836.730599] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66836.730604] Not Ready: Medium not present
[66836.730608] scsi cmd done, result=0x2
[66836.730615] *** thread sleeping
[66838.711760] *** thread awakened
[66838.711767] Command TEST_UNIT_READY (6 bytes)
[66838.711772] bytes: 00 00 00 00 00 00
[66838.711776] Bulk Command S 0x43425355 T 0x3fc43 L 0 F 0 Trg 0 LUN 0 CL 6
[66838.711783] xfer 31 bytes
[66838.711911] Status code 0; transferred 31/31
[66838.711919] -- transfer complete
[66838.711921] Bulk command transfer result=0
[66838.711924] Attempting to get CSW...
[66838.711926] xfer 13 bytes
[66838.711999] Status code 0; transferred 13/13
[66838.712003] -- transfer complete
[66838.712005] Bulk status result = 0
[66838.712007] Bulk Status S 0x53425355 T 0x3fc43 R 0 Stat 0x1
[66838.712012] -- transport indicates command failure
[66838.712014] Issuing auto-REQUEST_SENSE
[66838.712017] Bulk Command S 0x43425355 T 0x3fc44 L 96 F 128 Trg 0 LUN 0 CL 6
[66838.712024] xfer 31 bytes
[66838.712098] Status code 0; transferred 31/31
[66838.712101] -- transfer complete
[66838.712103] Bulk command transfer result=0
[66838.712106] xfer 96 bytes, 1 entries
[66838.712231] Status code -121; transferred 18/96
[66838.712234] -- short read transfer
[66838.712236] Bulk data transfer result 0x1
[66838.712239] Attempting to get CSW...
[66838.712240] xfer 13 bytes
[66838.712416] Status code -32; transferred 0/13
[66838.712419] clearing endpoint halt for pipe 0xc0008380
[66838.712422] rq=01 rqtype=02 value=0000 index=81 len=0
[66838.712806] result = 0
[66838.712812] Attempting to get CSW (2nd try)...
[66838.712815] xfer 13 bytes
[66838.712938] Status code 0; transferred 13/13
[66838.712945] -- transfer complete
[66838.712947] Bulk status result = 0
[66838.712950] Bulk Status S 0x53425355 T 0x3fc44 R 78 Stat 0x0
[66838.712957] -- Result from auto-sense is 0
[66838.712959] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66838.712965] Not Ready: Medium not present
[66838.712969] scsi cmd done, result=0x2
[66838.712977] *** thread sleeping
[66838.713028] *** thread awakened
[66838.713031] Command TEST_UNIT_READY (6 bytes)
[66838.713037] bytes: 00 00 00 00 00 00
[66838.713041] Bulk Command S 0x43425355 T 0x3fc45 L 0 F 0 Trg 0 LUN 2 CL 6
[66838.713047] xfer 31 bytes
[66838.713170] Status code 0; transferred 31/31
[66838.713177] -- transfer complete
[66838.713180] Bulk command transfer result=0
[66838.713182] Attempting to get CSW...
[66838.713184] xfer 13 bytes
[66838.713384] Status code 0; transferred 13/13
[66838.713391] -- transfer complete
[66838.713393] Bulk status result = 0
[66838.713396] Bulk Status S 0x53425355 T 0x3fc45 R 0 Stat 0x1
[66838.713401] -- transport indicates command failure
[66838.713403] Issuing auto-REQUEST_SENSE
[66838.713406] Bulk Command S 0x43425355 T 0x3fc46 L 96 F 128 Trg 0 LUN 2 CL 6
[66838.713414] xfer 31 bytes
[66838.713518] Status code 0; transferred 31/31
[66838.713525] -- transfer complete
[66838.713527] Bulk command transfer result=0
[66838.713530] xfer 96 bytes, 1 entries
[66838.713679] Status code -121; transferred 18/96
[66838.713686] -- short read transfer
[66838.713690] Bulk data transfer result 0x1
[66838.713693] Attempting to get CSW...
[66838.713695] xfer 13 bytes
[66838.713877] Status code -32; transferred 0/13
[66838.713885] clearing endpoint halt for pipe 0xc0008380
[66838.713888] rq=01 rqtype=02 value=0000 index=81 len=0
[66838.714281] result = 0
[66838.714287] Attempting to get CSW (2nd try)...
[66838.714289] xfer 13 bytes
[66838.714396] Status code 0; transferred 13/13
[66838.714403] -- transfer complete
[66838.714406] Bulk status result = 0
[66838.714409] Bulk Status S 0x53425355 T 0x3fc46 R 78 Stat 0x0
[66838.714414] -- Result from auto-sense is 0
[66838.714417] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66838.714422] Not Ready: Medium not present
[66838.714426] scsi cmd done, result=0x2
[66838.714433] *** thread sleeping
[66838.775684] *** thread awakened
[66838.775691] Command TEST_UNIT_READY (6 bytes)
[66838.775695] bytes: 00 00 00 00 00 00
[66838.775700] Bulk Command S 0x43425355 T 0x3fc47 L 0 F 0 Trg 0 LUN 3 CL 6
[66838.775707] xfer 31 bytes
[66838.775778] Status code 0; transferred 31/31
[66838.775782] -- transfer complete
[66838.775784] Bulk command transfer result=0
[66838.775787] Attempting to get CSW...
[66838.775788] xfer 13 bytes
[66838.776039] Status code 0; transferred 13/13
[66838.776042] -- transfer complete
[66838.776044] Bulk status result = 0
[66838.776046] Bulk Status S 0x53425355 T 0x3fc47 R 0 Stat 0x1
[66838.776051] -- transport indicates command failure
[66838.776053] Issuing auto-REQUEST_SENSE
[66838.776056] Bulk Command S 0x43425355 T 0x3fc48 L 96 F 128 Trg 0 LUN 3 CL 6
[66838.776062] xfer 31 bytes
[66838.776123] Status code 0; transferred 31/31
[66838.776126] -- transfer complete
[66838.776128] Bulk command transfer result=0
[66838.776131] xfer 96 bytes, 1 entries
[66838.776264] Status code -121; transferred 18/96
[66838.776267] -- short read transfer
[66838.776269] Bulk data transfer result 0x1
[66838.776272] Attempting to get CSW...
[66838.776274] xfer 13 bytes
[66838.776441] Status code -32; transferred 0/13
[66838.776445] clearing endpoint halt for pipe 0xc0008380
[66838.776447] rq=01 rqtype=02 value=0000 index=81 len=0
[66838.776851] result = 0
[66838.776857] Attempting to get CSW (2nd try)...
[66838.776860] xfer 13 bytes
[66838.776956] Status code 0; transferred 13/13
[66838.776963] -- transfer complete
[66838.776965] Bulk status result = 0
[66838.776968] Bulk Status S 0x53425355 T 0x3fc48 R 78 Stat 0x0
[66838.776974] -- Result from auto-sense is 0
[66838.776976] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66838.776982] Not Ready: Medium not present
[66838.776987] scsi cmd done, result=0x2
[66838.776994] *** thread sleeping
[66838.777045] *** thread awakened
[66838.777048] Command TEST_UNIT_READY (6 bytes)
[66838.777051] bytes: 00 00 00 00 00 00
[66838.777056] Bulk Command S 0x43425355 T 0x3fc49 L 0 F 0 Trg 0 LUN 1 CL 6
[66838.777062] xfer 31 bytes
[66838.777186] Status code 0; transferred 31/31
[66838.777194] -- transfer complete
[66838.777197] Bulk command transfer result=0
[66838.777199] Attempting to get CSW...
[66838.777201] xfer 13 bytes
[66838.777541] Status code 0; transferred 13/13
[66838.777548] -- transfer complete
[66838.777550] Bulk status result = 0
[66838.777553] Bulk Status S 0x53425355 T 0x3fc49 R 0 Stat 0x1
[66838.777558] -- transport indicates command failure
[66838.777560] Issuing auto-REQUEST_SENSE
[66838.777572] Bulk Command S 0x43425355 T 0x3fc4a L 96 F 128 Trg 0 LUN 1 CL 6
[66838.777579] xfer 31 bytes
[66838.777698] Status code 0; transferred 31/31
[66838.777704] -- transfer complete
[66838.777707] Bulk command transfer result=0
[66838.777709] xfer 96 bytes, 1 entries
[66838.777837] Status code -121; transferred 18/96
[66838.777844] -- short read transfer
[66838.777846] Bulk data transfer result 0x1
[66838.777849] Attempting to get CSW...
[66838.777851] xfer 13 bytes
[66838.778059] Status code -32; transferred 0/13
[66838.778066] clearing endpoint halt for pipe 0xc0008380
[66838.778069] rq=01 rqtype=02 value=0000 index=81 len=0
[66838.778462] result = 0
[66838.778468] Attempting to get CSW (2nd try)...
[66838.778470] xfer 13 bytes
[66838.778559] Status code 0; transferred 13/13
[66838.778577] -- transfer complete
[66838.778580] Bulk status result = 0
[66838.778584] Bulk Status S 0x53425355 T 0x3fc4a R 78 Stat 0x0
[66838.778590] -- Result from auto-sense is 0
[66838.778593] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66838.778598] Not Ready: Medium not present
[66838.778602] scsi cmd done, result=0x2
[66838.778608] *** thread sleeping
[66840.759827] *** thread awakened
[66840.759833] Command TEST_UNIT_READY (6 bytes)
[66840.759838] bytes: 00 00 00 00 00 00
[66840.759843] Bulk Command S 0x43425355 T 0x3fc4b L 0 F 0 Trg 0 LUN 2 CL 6
[66840.759849] xfer 31 bytes
[66840.759957] Status code 0; transferred 31/31
[66840.759964] -- transfer complete
[66840.759967] Bulk command transfer result=0
[66840.759969] Attempting to get CSW...
[66840.759971] xfer 13 bytes
[66840.760140] Status code 0; transferred 13/13
[66840.760144] -- transfer complete
[66840.760145] Bulk status result = 0
[66840.760148] Bulk Status S 0x53425355 T 0x3fc4b R 0 Stat 0x1
[66840.760154] -- transport indicates command failure
[66840.760156] Issuing auto-REQUEST_SENSE
[66840.760158] Bulk Command S 0x43425355 T 0x3fc4c L 96 F 128 Trg 0 LUN 2 CL 6
[66840.760165] xfer 31 bytes
[66840.760229] Status code 0; transferred 31/31
[66840.760232] -- transfer complete
[66840.760234] Bulk command transfer result=0
[66840.760237] xfer 96 bytes, 1 entries
[66840.760382] Status code -121; transferred 18/96
[66840.760385] -- short read transfer
[66840.760387] Bulk data transfer result 0x1
[66840.760390] Attempting to get CSW...
[66840.760392] xfer 13 bytes
[66840.760531] Status code -32; transferred 0/13
[66840.760534] clearing endpoint halt for pipe 0xc0008380
[66840.760537] rq=01 rqtype=02 value=0000 index=81 len=0
[66840.760942] result = 0
[66840.760948] Attempting to get CSW (2nd try)...
[66840.760951] xfer 13 bytes
[66840.761072] Status code 0; transferred 13/13
[66840.761079] -- transfer complete
[66840.761081] Bulk status result = 0
[66840.761084] Bulk Status S 0x53425355 T 0x3fc4c R 78 Stat 0x0
[66840.761091] -- Result from auto-sense is 0
[66840.761093] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66840.761099] Not Ready: Medium not present
[66840.761103] scsi cmd done, result=0x2
[66840.761111] *** thread sleeping
[66840.761197] *** thread awakened
[66840.761202] Command TEST_UNIT_READY (6 bytes)
[66840.761207] bytes: 00 00 00 00 00 00
[66840.761211] Bulk Command S 0x43425355 T 0x3fc4d L 0 F 0 Trg 0 LUN 0 CL 6
[66840.761217] xfer 31 bytes
[66840.761342] Status code 0; transferred 31/31
[66840.761349] -- transfer complete
[66840.761352] Bulk command transfer result=0
[66840.761354] Attempting to get CSW...
[66840.761356] xfer 13 bytes
[66840.761429] Status code 0; transferred 13/13
[66840.761433] -- transfer complete
[66840.761435] Bulk status result = 0
[66840.761438] Bulk Status S 0x53425355 T 0x3fc4d R 0 Stat 0x1
[66840.761443] -- transport indicates command failure
[66840.761445] Issuing auto-REQUEST_SENSE
[66840.761447] Bulk Command S 0x43425355 T 0x3fc4e L 96 F 128 Trg 0 LUN 0 CL 6
[66840.761454] xfer 31 bytes
[66840.761525] Status code 0; transferred 31/31
[66840.761528] -- transfer complete
[66840.761530] Bulk command transfer result=0
[66840.761532] xfer 96 bytes, 1 entries
[66840.761669] Status code -121; transferred 18/96
[66840.761673] -- short read transfer
[66840.761675] Bulk data transfer result 0x1
[66840.761678] Attempting to get CSW...
[66840.761679] xfer 13 bytes
[66840.761874] Status code -32; transferred 0/13
[66840.761882] clearing endpoint halt for pipe 0xc0008380
[66840.761885] rq=01 rqtype=02 value=0000 index=81 len=0
[66840.762241] result = 0
[66840.762244] Attempting to get CSW (2nd try)...
[66840.762246] xfer 13 bytes
[66840.762357] Status code 0; transferred 13/13
[66840.762364] -- transfer complete
[66840.762366] Bulk status result = 0
[66840.762369] Bulk Status S 0x53425355 T 0x3fc4e R 78 Stat 0x0
[66840.762376] -- Result from auto-sense is 0
[66840.762378] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66840.762383] Not Ready: Medium not present
[66840.762387] scsi cmd done, result=0x2
[66840.762394] *** thread sleeping
[66840.823711] *** thread awakened
[66840.823718] Command TEST_UNIT_READY (6 bytes)
[66840.823722] bytes: 00 00 00 00 00 00
[66840.823727] Bulk Command S 0x43425355 T 0x3fc4f L 0 F 0 Trg 0 LUN 1 CL 6
[66840.823733] xfer 31 bytes
[66840.823858] Status code 0; transferred 31/31
[66840.823866] -- transfer complete
[66840.823868] Bulk command transfer result=0
[66840.823871] Attempting to get CSW...
[66840.823872] xfer 13 bytes
[66840.824042] Status code 0; transferred 13/13
[66840.824046] -- transfer complete
[66840.824048] Bulk status result = 0
[66840.824050] Bulk Status S 0x53425355 T 0x3fc4f R 0 Stat 0x1
[66840.824055] -- transport indicates command failure
[66840.824058] Issuing auto-REQUEST_SENSE
[66840.824060] Bulk Command S 0x43425355 T 0x3fc50 L 96 F 128 Trg 0 LUN 1 CL 6
[66840.824066] xfer 31 bytes
[66840.824137] Status code 0; transferred 31/31
[66840.824141] -- transfer complete
[66840.824142] Bulk command transfer result=0
[66840.824145] xfer 96 bytes, 1 entries
[66840.824273] Status code -121; transferred 18/96
[66840.824277] -- short read transfer
[66840.824278] Bulk data transfer result 0x1
[66840.824281] Attempting to get CSW...
[66840.824283] xfer 13 bytes
[66840.824451] Status code -32; transferred 0/13
[66840.824455] clearing endpoint halt for pipe 0xc0008380
[66840.824458] rq=01 rqtype=02 value=0000 index=81 len=0
[66840.824861] result = 0
[66840.824867] Attempting to get CSW (2nd try)...
[66840.824869] xfer 13 bytes
[66840.824993] Status code 0; transferred 13/13
[66840.825000] -- transfer complete
[66840.825004] Bulk status result = 0
[66840.825007] Bulk Status S 0x53425355 T 0x3fc50 R 78 Stat 0x0
[66840.825013] -- Result from auto-sense is 0
[66840.825015] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66840.825021] Not Ready: Medium not present
[66840.825025] scsi cmd done, result=0x2
[66840.825035] *** thread sleeping
[66840.825088] *** thread awakened
[66840.825091] Command TEST_UNIT_READY (6 bytes)
[66840.825094] bytes: 00 00 00 00 00 00
[66840.825098] Bulk Command S 0x43425355 T 0x3fc51 L 0 F 0 Trg 0 LUN 3 CL 6
[66840.825104] xfer 31 bytes
[66840.825228] Status code 0; transferred 31/31
[66840.825235] -- transfer complete
[66840.825240] Bulk command transfer result=0
[66840.825243] Attempting to get CSW...
[66840.825245] xfer 13 bytes
[66840.825456] Status code 0; transferred 13/13
[66840.825463] -- transfer complete
[66840.825466] Bulk status result = 0
[66840.825468] Bulk Status S 0x53425355 T 0x3fc51 R 0 Stat 0x1
[66840.825474] -- transport indicates command failure
[66840.825476] Issuing auto-REQUEST_SENSE
[66840.825478] Bulk Command S 0x43425355 T 0x3fc52 L 96 F 128 Trg 0 LUN 3 CL 6
[66840.825485] xfer 31 bytes
[66840.825609] Status code 0; transferred 31/31
[66840.825616] -- transfer complete
[66840.825618] Bulk command transfer result=0
[66840.825621] xfer 96 bytes, 1 entries
[66840.825748] Status code -121; transferred 18/96
[66840.825756] -- short read transfer
[66840.825758] Bulk data transfer result 0x1
[66840.825761] Attempting to get CSW...
[66840.825763] xfer 13 bytes
[66840.825956] Status code -32; transferred 0/13
[66840.825963] clearing endpoint halt for pipe 0xc0008380
[66840.825967] rq=01 rqtype=02 value=0000 index=81 len=0
[66840.826335] result = 0
[66840.826341] Attempting to get CSW (2nd try)...
[66840.826344] xfer 13 bytes
[66840.826454] Status code 0; transferred 13/13
[66840.826461] -- transfer complete
[66840.826463] Bulk status result = 0
[66840.826466] Bulk Status S 0x53425355 T 0x3fc52 R 78 Stat 0x0
[66840.826471] -- Result from auto-sense is 0
[66840.826474] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66840.826479] Not Ready: Medium not present
[66840.826483] scsi cmd done, result=0x2
[66840.826490] *** thread sleeping
[66842.807663] *** thread awakened
[66842.807669] Command TEST_UNIT_READY (6 bytes)
[66842.807674] bytes: 00 00 00 00 00 00
[66842.807679] Bulk Command S 0x43425355 T 0x3fc53 L 0 F 0 Trg 0 LUN 0 CL 6
[66842.807686] xfer 31 bytes
[66842.807792] Status code 0; transferred 31/31
[66842.807799] -- transfer complete
[66842.807802] Bulk command transfer result=0
[66842.807804] Attempting to get CSW...
[66842.807806] xfer 13 bytes
[66842.807872] Status code 0; transferred 13/13
[66842.807875] -- transfer complete
[66842.807877] Bulk status result = 0
[66842.807880] Bulk Status S 0x53425355 T 0x3fc53 R 0 Stat 0x1
[66842.807885] -- transport indicates command failure
[66842.807887] Issuing auto-REQUEST_SENSE
[66842.807890] Bulk Command S 0x43425355 T 0x3fc54 L 96 F 128 Trg 0 LUN 0 CL 6
[66842.807897] xfer 31 bytes
[66842.807962] Status code 0; transferred 31/31
[66842.807965] -- transfer complete
[66842.807967] Bulk command transfer result=0
[66842.807969] xfer 96 bytes, 1 entries
[66842.808097] Status code -121; transferred 18/96
[66842.808101] -- short read transfer
[66842.808103] Bulk data transfer result 0x1
[66842.808105] Attempting to get CSW...
[66842.808107] xfer 13 bytes
[66842.808265] Status code -32; transferred 0/13
[66842.808269] clearing endpoint halt for pipe 0xc0008380
[66842.808272] rq=01 rqtype=02 value=0000 index=81 len=0
[66842.808623] result = 0
[66842.808627] Attempting to get CSW (2nd try)...
[66842.808628] xfer 13 bytes
[66842.808731] Status code 0; transferred 13/13
[66842.808738] -- transfer complete
[66842.808741] Bulk status result = 0
[66842.808743] Bulk Status S 0x53425355 T 0x3fc54 R 78 Stat 0x0
[66842.808749] -- Result from auto-sense is 0
[66842.808751] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66842.808757] Not Ready: Medium not present
[66842.808762] scsi cmd done, result=0x2
[66842.808769] *** thread sleeping
[66842.808859] *** thread awakened
[66842.808864] Command TEST_UNIT_READY (6 bytes)
[66842.808869] bytes: 00 00 00 00 00 00
[66842.808873] Bulk Command S 0x43425355 T 0x3fc55 L 0 F 0 Trg 0 LUN 2 CL 6
[66842.808879] xfer 31 bytes
[66842.808983] Status code 0; transferred 31/31
[66842.808990] -- transfer complete
[66842.808993] Bulk command transfer result=0
[66842.808995] Attempting to get CSW...
[66842.808997] xfer 13 bytes
[66842.809197] Status code 0; transferred 13/13
[66842.809204] -- transfer complete
[66842.809209] Bulk status result = 0
[66842.809212] Bulk Status S 0x53425355 T 0x3fc55 R 0 Stat 0x1
[66842.809217] -- transport indicates command failure
[66842.809219] Issuing auto-REQUEST_SENSE
[66842.809222] Bulk Command S 0x43425355 T 0x3fc56 L 96 F 128 Trg 0 LUN 2 CL 6
[66842.809228] xfer 31 bytes
[66842.809332] Status code 0; transferred 31/31
[66842.809339] -- transfer complete
[66842.809342] Bulk command transfer result=0
[66842.809344] xfer 96 bytes, 1 entries
[66842.809493] Status code -121; transferred 18/96
[66842.809500] -- short read transfer
[66842.809503] Bulk data transfer result 0x1
[66842.809505] Attempting to get CSW...
[66842.809507] xfer 13 bytes
[66842.809646] Status code -32; transferred 0/13
[66842.809650] clearing endpoint halt for pipe 0xc0008380
[66842.809653] rq=01 rqtype=02 value=0000 index=81 len=0
[66842.810000] result = 0
[66842.810003] Attempting to get CSW (2nd try)...
[66842.810005] xfer 13 bytes
[66842.810092] Status code 0; transferred 13/13
[66842.810099] -- transfer complete
[66842.810101] Bulk status result = 0
[66842.810105] Bulk Status S 0x53425355 T 0x3fc56 R 78 Stat 0x0
[66842.810111] -- Result from auto-sense is 0
[66842.810113] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66842.810119] Not Ready: Medium not present
[66842.810123] scsi cmd done, result=0x2
[66842.810130] *** thread sleeping
[66842.871768] *** thread awakened
[66842.871775] Command TEST_UNIT_READY (6 bytes)
[66842.871779] bytes: 00 00 00 00 00 00
[66842.871784] Bulk Command S 0x43425355 T 0x3fc57 L 0 F 0 Trg 0 LUN 1 CL 6
[66842.871790] xfer 31 bytes
[66842.871856] Status code 0; transferred 31/31
[66842.871860] -- transfer complete
[66842.871862] Bulk command transfer result=0
[66842.871865] Attempting to get CSW...
[66842.871867] xfer 13 bytes
[66842.872236] Status code 0; transferred 13/13
[66842.872239] -- transfer complete
[66842.872241] Bulk status result = 0
[66842.872243] Bulk Status S 0x53425355 T 0x3fc57 R 0 Stat 0x1
[66842.872247] -- transport indicates command failure
[66842.872250] Issuing auto-REQUEST_SENSE
[66842.872252] Bulk Command S 0x43425355 T 0x3fc58 L 96 F 128 Trg 0 LUN 1 CL 6
[66842.872258] xfer 31 bytes
[66842.872312] Status code 0; transferred 31/31
[66842.872315] -- transfer complete
[66842.872317] Bulk command transfer result=0
[66842.872319] xfer 96 bytes, 1 entries
[66842.872441] Status code -121; transferred 18/96
[66842.872445] -- short read transfer
[66842.872446] Bulk data transfer result 0x1
[66842.872449] Attempting to get CSW...
[66842.872451] xfer 13 bytes
[66842.872592] Status code -32; transferred 0/13
[66842.872595] clearing endpoint halt for pipe 0xc0008380
[66842.872598] rq=01 rqtype=02 value=0000 index=81 len=0
[66842.873000] result = 0
[66842.873006] Attempting to get CSW (2nd try)...
[66842.873009] xfer 13 bytes
[66842.873084] Status code 0; transferred 13/13
[66842.873088] -- transfer complete
[66842.873090] Bulk status result = 0
[66842.873093] Bulk Status S 0x53425355 T 0x3fc58 R 78 Stat 0x0
[66842.873098] -- Result from auto-sense is 0
[66842.873101] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66842.873106] Not Ready: Medium not present
[66842.873111] scsi cmd done, result=0x2
[66842.873118] *** thread sleeping
[66842.873167] *** thread awakened
[66842.873170] Command TEST_UNIT_READY (6 bytes)
[66842.873173] bytes: 00 00 00 00 00 00
[66842.873177] Bulk Command S 0x43425355 T 0x3fc59 L 0 F 0 Trg 0 LUN 3 CL 6
[66842.873183] xfer 31 bytes
[66842.873253] Status code 0; transferred 31/31
[66842.873257] -- transfer complete
[66842.873259] Bulk command transfer result=0
[66842.873261] Attempting to get CSW...
[66842.873263] xfer 13 bytes
[66842.873500] Status code 0; transferred 13/13
[66842.873503] -- transfer complete
[66842.873505] Bulk status result = 0
[66842.873508] Bulk Status S 0x53425355 T 0x3fc59 R 0 Stat 0x1
[66842.873512] -- transport indicates command failure
[66842.873514] Issuing auto-REQUEST_SENSE
[66842.873516] Bulk Command S 0x43425355 T 0x3fc5a L 96 F 128 Trg 0 LUN 3 CL 6
[66842.873521] xfer 31 bytes
[66842.873654] Status code 0; transferred 31/31
[66842.873661] -- transfer complete
[66842.873663] Bulk command transfer result=0
[66842.873666] xfer 96 bytes, 1 entries
[66842.873791] Status code -121; transferred 18/96
[66842.873798] -- short read transfer
[66842.873800] Bulk data transfer result 0x1
[66842.873803] Attempting to get CSW...
[66842.873805] xfer 13 bytes
[66842.873961] Status code -32; transferred 0/13
[66842.873965] clearing endpoint halt for pipe 0xc0008380
[66842.873968] rq=01 rqtype=02 value=0000 index=81 len=0
[66842.874302] result = 0
[66842.874304] Attempting to get CSW (2nd try)...
[66842.874306] xfer 13 bytes
[66842.874413] Status code 0; transferred 13/13
[66842.874420] -- transfer complete
[66842.874423] Bulk status result = 0
[66842.874425] Bulk Status S 0x53425355 T 0x3fc5a R 78 Stat 0x0
[66842.874431] -- Result from auto-sense is 0
[66842.874433] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66842.874441] Not Ready: Medium not present
[66842.874445] scsi cmd done, result=0x2
[66842.874452] *** thread sleeping
[66844.855834] *** thread awakened
[66844.855841] Command TEST_UNIT_READY (6 bytes)
[66844.855845] bytes: 00 00 00 00 00 00
[66844.855850] Bulk Command S 0x43425355 T 0x3fc5b L 0 F 0 Trg 0 LUN 2 CL 6
[66844.855856] xfer 31 bytes
[66844.855925] Status code 0; transferred 31/31
[66844.855929] -- transfer complete
[66844.855931] Bulk command transfer result=0
[66844.855933] Attempting to get CSW...
[66844.855935] xfer 13 bytes
[66844.856134] Status code 0; transferred 13/13
[66844.856138] -- transfer complete
[66844.856139] Bulk status result = 0
[66844.856142] Bulk Status S 0x53425355 T 0x3fc5b R 0 Stat 0x1
[66844.856147] -- transport indicates command failure
[66844.856149] Issuing auto-REQUEST_SENSE
[66844.856151] Bulk Command S 0x43425355 T 0x3fc5c L 96 F 128 Trg 0 LUN 2 CL 6
[66844.856157] xfer 31 bytes
[66844.856214] Status code 0; transferred 31/31
[66844.856217] -- transfer complete
[66844.856219] Bulk command transfer result=0
[66844.856221] xfer 96 bytes, 1 entries
[66844.856364] Status code -121; transferred 18/96
[66844.856367] -- short read transfer
[66844.856369] Bulk data transfer result 0x1
[66844.856372] Attempting to get CSW...
[66844.856373] xfer 13 bytes
[66844.856513] Status code -32; transferred 0/13
[66844.856517] clearing endpoint halt for pipe 0xc0008380
[66844.856519] rq=01 rqtype=02 value=0000 index=81 len=0
[66844.856924] result = 0
[66844.856930] Attempting to get CSW (2nd try)...
[66844.856933] xfer 13 bytes
[66844.857056] Status code 0; transferred 13/13
[66844.857063] -- transfer complete
[66844.857068] Bulk status result = 0
[66844.857071] Bulk Status S 0x53425355 T 0x3fc5c R 78 Stat 0x0
[66844.857077] -- Result from auto-sense is 0
[66844.857079] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66844.857085] Not Ready: Medium not present
[66844.857089] scsi cmd done, result=0x2
[66844.857100] *** thread sleeping
[66844.857183] *** thread awakened
[66844.857189] Command TEST_UNIT_READY (6 bytes)
[66844.857193] bytes: 00 00 00 00 00 00
[66844.857197] Bulk Command S 0x43425355 T 0x3fc5d L 0 F 0 Trg 0 LUN 0 CL 6
[66844.857204] xfer 31 bytes
[66844.857328] Status code 0; transferred 31/31
[66844.857336] -- transfer complete
[66844.857338] Bulk command transfer result=0
[66844.857341] Attempting to get CSW...
[66844.857343] xfer 13 bytes
[66844.857466] Status code 0; transferred 13/13
[66844.857473] -- transfer complete
[66844.857476] Bulk status result = 0
[66844.857478] Bulk Status S 0x53425355 T 0x3fc5d R 0 Stat 0x1
[66844.857483] -- transport indicates command failure
[66844.857486] Issuing auto-REQUEST_SENSE
[66844.857490] Bulk Command S 0x43425355 T 0x3fc5e L 96 F 128 Trg 0 LUN 0 CL 6
[66844.857496] xfer 31 bytes
[66844.857620] Status code 0; transferred 31/31
[66844.857627] -- transfer complete
[66844.857630] Bulk command transfer result=0
[66844.857633] xfer 96 bytes, 1 entries
[66844.857707] Status code -121; transferred 18/96
[66844.857711] -- short read transfer
[66844.857713] Bulk data transfer result 0x1
[66844.857716] Attempting to get CSW...
[66844.857718] xfer 13 bytes
[66844.857877] Status code -32; transferred 0/13
[66844.857881] clearing endpoint halt for pipe 0xc0008380
[66844.857884] rq=01 rqtype=02 value=0000 index=81 len=0
[66844.858239] result = 0
[66844.858242] Attempting to get CSW (2nd try)...
[66844.858244] xfer 13 bytes
[66844.858299] Status code 0; transferred 13/13
[66844.858304] -- transfer complete
[66844.858306] Bulk status result = 0
[66844.858308] Bulk Status S 0x53425355 T 0x3fc5e R 78 Stat 0x0
[66844.858314] -- Result from auto-sense is 0
[66844.858316] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66844.858321] Not Ready: Medium not present
[66844.858325] scsi cmd done, result=0x2
[66844.858333] *** thread sleeping
[66844.919673] *** thread awakened
[66844.919679] Command TEST_UNIT_READY (6 bytes)
[66844.919684] bytes: 00 00 00 00 00 00
[66844.919688] Bulk Command S 0x43425355 T 0x3fc5f L 0 F 0 Trg 0 LUN 1 CL 6
[66844.919695] xfer 31 bytes
[66844.919787] Status code 0; transferred 31/31
[66844.919794] -- transfer complete
[66844.919796] Bulk command transfer result=0
[66844.919799] Attempting to get CSW...
[66844.919801] xfer 13 bytes
[66844.920133] Status code 0; transferred 13/13
[66844.920136] -- transfer complete
[66844.920138] Bulk status result = 0
[66844.920141] Bulk Status S 0x53425355 T 0x3fc5f R 0 Stat 0x1
[66844.920146] -- transport indicates command failure
[66844.920148] Issuing auto-REQUEST_SENSE
[66844.920151] Bulk Command S 0x43425355 T 0x3fc60 L 96 F 128 Trg 0 LUN 1 CL 6
[66844.920157] xfer 31 bytes
[66844.920214] Status code 0; transferred 31/31
[66844.920217] -- transfer complete
[66844.920219] Bulk command transfer result=0
[66844.920222] xfer 96 bytes, 1 entries
[66844.920343] Status code -121; transferred 18/96
[66844.920346] -- short read transfer
[66844.920348] Bulk data transfer result 0x1
[66844.920350] Attempting to get CSW...
[66844.920352] xfer 13 bytes
[66844.920492] Status code -32; transferred 0/13
[66844.920495] clearing endpoint halt for pipe 0xc0008380
[66844.920498] rq=01 rqtype=02 value=0000 index=81 len=0
[66844.920903] result = 0
[66844.920908] Attempting to get CSW (2nd try)...
[66844.920911] xfer 13 bytes
[66844.921036] Status code 0; transferred 13/13
[66844.921043] -- transfer complete
[66844.921045] Bulk status result = 0
[66844.921047] Bulk Status S 0x53425355 T 0x3fc60 R 78 Stat 0x0
[66844.921053] -- Result from auto-sense is 0
[66844.921058] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66844.921063] Not Ready: Medium not present
[66844.921068] scsi cmd done, result=0x2
[66844.921076] *** thread sleeping
[66844.921160] *** thread awakened
[66844.921165] Command TEST_UNIT_READY (6 bytes)
[66844.921170] bytes: 00 00 00 00 00 00
[66844.921175] Bulk Command S 0x43425355 T 0x3fc61 L 0 F 0 Trg 0 LUN 3 CL 6
[66844.921182] xfer 31 bytes
[66844.921306] Status code 0; transferred 31/31
[66844.921313] -- transfer complete
[66844.921316] Bulk command transfer result=0
[66844.921318] Attempting to get CSW...
[66844.921320] xfer 13 bytes
[66844.921536] Status code 0; transferred 13/13
[66844.921543] -- transfer complete
[66844.921546] Bulk status result = 0
[66844.921548] Bulk Status S 0x53425355 T 0x3fc61 R 0 Stat 0x1
[66844.921554] -- transport indicates command failure
[66844.921556] Issuing auto-REQUEST_SENSE
[66844.921558] Bulk Command S 0x43425355 T 0x3fc62 L 96 F 128 Trg 0 LUN 3 CL 6
[66844.921576] xfer 31 bytes
[66844.921676] Status code 0; transferred 31/31
[66844.921683] -- transfer complete
[66844.921686] Bulk command transfer result=0
[66844.921688] xfer 96 bytes, 1 entries
[66844.921836] Status code -121; transferred 18/96
[66844.921843] -- short read transfer
[66844.921846] Bulk data transfer result 0x1
[66844.921849] Attempting to get CSW...
[66844.921851] xfer 13 bytes
[66844.922028] Status code -32; transferred 0/13
[66844.922032] clearing endpoint halt for pipe 0xc0008380
[66844.922035] rq=01 rqtype=02 value=0000 index=81 len=0
[66844.922422] result = 0
[66844.922428] Attempting to get CSW (2nd try)...
[66844.922430] xfer 13 bytes
[66844.922540] Status code 0; transferred 13/13
[66844.922547] -- transfer complete
[66844.922549] Bulk status result = 0
[66844.922552] Bulk Status S 0x53425355 T 0x3fc62 R 78 Stat 0x0
[66844.922558] -- Result from auto-sense is 0
[66844.922560] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66844.922576] Not Ready: Medium not present
[66844.922580] scsi cmd done, result=0x2
[66844.922587] *** thread sleeping
[66846.903770] *** thread awakened
[66846.903775] Command TEST_UNIT_READY (6 bytes)
[66846.903780] bytes: 00 00 00 00 00 00
[66846.903784] Bulk Command S 0x43425355 T 0x3fc63 L 0 F 0 Trg 0 LUN 0 CL 6
[66846.903789] xfer 31 bytes
[66846.903891] Status code 0; transferred 31/31
[66846.903898] -- transfer complete
[66846.903900] Bulk command transfer result=0
[66846.903902] Attempting to get CSW...
[66846.903904] xfer 13 bytes
[66846.903969] Status code 0; transferred 13/13
[66846.903972] -- transfer complete
[66846.903973] Bulk status result = 0
[66846.903975] Bulk Status S 0x53425355 T 0x3fc63 R 0 Stat 0x1
[66846.903980] -- transport indicates command failure
[66846.903982] Issuing auto-REQUEST_SENSE
[66846.903984] Bulk Command S 0x43425355 T 0x3fc64 L 96 F 128 Trg 0 LUN 0 CL 6
[66846.903990] xfer 31 bytes
[66846.904050] Status code 0; transferred 31/31
[66846.904053] -- transfer complete
[66846.904054] Bulk command transfer result=0
[66846.904057] xfer 96 bytes, 1 entries
[66846.904181] Status code -121; transferred 18/96
[66846.904185] -- short read transfer
[66846.904186] Bulk data transfer result 0x1
[66846.904188] Attempting to get CSW...
[66846.904190] xfer 13 bytes
[66846.904358] Status code -32; transferred 0/13
[66846.904361] clearing endpoint halt for pipe 0xc0008380
[66846.904365] rq=01 rqtype=02 value=0000 index=81 len=0
[66846.904748] result = 0
[66846.904754] Attempting to get CSW (2nd try)...
[66846.904757] xfer 13 bytes
[66846.904881] Status code 0; transferred 13/13
[66846.904888] -- transfer complete
[66846.904892] Bulk status result = 0
[66846.904894] Bulk Status S 0x53425355 T 0x3fc64 R 78 Stat 0x0
[66846.904900] -- Result from auto-sense is 0
[66846.904903] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66846.904908] Not Ready: Medium not present
[66846.904912] scsi cmd done, result=0x2
[66846.904922] *** thread sleeping
[66846.905007] *** thread awakened
[66846.905012] Command TEST_UNIT_READY (6 bytes)
[66846.905017] bytes: 00 00 00 00 00 00
[66846.905021] Bulk Command S 0x43425355 T 0x3fc65 L 0 F 0 Trg 0 LUN 2 CL 6
[66846.905028] xfer 31 bytes
[66846.905157] Status code 0; transferred 31/31
[66846.905164] -- transfer complete
[66846.905166] Bulk command transfer result=0
[66846.905170] Attempting to get CSW...
[66846.905172] xfer 13 bytes
[66846.905374] Status code 0; transferred 13/13
[66846.905380] -- transfer complete
[66846.905382] Bulk status result = 0
[66846.905387] Bulk Status S 0x53425355 T 0x3fc65 R 0 Stat 0x1
[66846.905392] -- transport indicates command failure
[66846.905394] Issuing auto-REQUEST_SENSE
[66846.905396] Bulk Command S 0x43425355 T 0x3fc66 L 96 F 128 Trg 0 LUN 2 CL 6
[66846.905402] xfer 31 bytes
[66846.905524] Status code 0; transferred 31/31
[66846.905531] -- transfer complete
[66846.905533] Bulk command transfer result=0
[66846.905535] xfer 96 bytes, 1 entries
[66846.905677] Status code -121; transferred 18/96
[66846.905684] -- short read transfer
[66846.905686] Bulk data transfer result 0x1
[66846.905689] Attempting to get CSW...
[66846.905691] xfer 13 bytes
[66846.905847] Status code -32; transferred 0/13
[66846.905851] clearing endpoint halt for pipe 0xc0008380
[66846.905853] rq=01 rqtype=02 value=0000 index=81 len=0
[66846.906208] result = 0
[66846.906210] Attempting to get CSW (2nd try)...
[66846.906212] xfer 13 bytes
[66846.906266] Status code 0; transferred 13/13
[66846.906269] -- transfer complete
[66846.906271] Bulk status result = 0
[66846.906273] Bulk Status S 0x53425355 T 0x3fc66 R 78 Stat 0x0
[66846.906278] -- Result from auto-sense is 0
[66846.906280] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66846.906284] Not Ready: Medium not present
[66846.906288] scsi cmd done, result=0x2
[66846.906294] *** thread sleeping
[66846.967698] *** thread awakened
[66846.967704] Command TEST_UNIT_READY (6 bytes)
[66846.967708] bytes: 00 00 00 00 00 00
[66846.967713] Bulk Command S 0x43425355 T 0x3fc67 L 0 F 0 Trg 0 LUN 3 CL 6
[66846.967719] xfer 31 bytes
[66846.967812] Status code 0; transferred 31/31
[66846.967820] -- transfer complete
[66846.967822] Bulk command transfer result=0
[66846.967825] Attempting to get CSW...
[66846.967826] xfer 13 bytes
[66846.967926] Status code 0; transferred 13/13
[66846.967929] -- transfer complete
[66846.967931] Bulk status result = 0
[66846.967934] Bulk Status S 0x53425355 T 0x3fc67 R 0 Stat 0x1
[66846.967939] -- transport indicates command failure
[66846.967941] Issuing auto-REQUEST_SENSE
[66846.967944] Bulk Command S 0x43425355 T 0x3fc68 L 96 F 128 Trg 0 LUN 3 CL 6
[66846.967950] xfer 31 bytes
[66846.968004] Status code 0; transferred 31/31
[66846.968007] -- transfer complete
[66846.968009] Bulk command transfer result=0
[66846.968012] xfer 96 bytes, 1 entries
[66846.968154] Status code -121; transferred 18/96
[66846.968158] -- short read transfer
[66846.968160] Bulk data transfer result 0x1
[66846.968162] Attempting to get CSW...
[66846.968164] xfer 13 bytes
[66846.968315] Status code -32; transferred 0/13
[66846.968318] clearing endpoint halt for pipe 0xc0008380
[66846.968321] rq=01 rqtype=02 value=0000 index=81 len=0
[66846.968723] result = 0
[66846.968729] Attempting to get CSW (2nd try)...
[66846.968731] xfer 13 bytes
[66846.968837] Status code 0; transferred 13/13
[66846.968844] -- transfer complete
[66846.968846] Bulk status result = 0
[66846.968849] Bulk Status S 0x53425355 T 0x3fc68 R 78 Stat 0x0
[66846.968855] -- Result from auto-sense is 0
[66846.968857] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66846.968863] Not Ready: Medium not present
[66846.968868] scsi cmd done, result=0x2
[66846.968875] *** thread sleeping
[66846.968980] *** thread awakened
[66846.968986] Command TEST_UNIT_READY (6 bytes)
[66846.968990] bytes: 00 00 00 00 00 00
[66846.968994] Bulk Command S 0x43425355 T 0x3fc69 L 0 F 0 Trg 0 LUN 1 CL 6
[66846.969001] xfer 31 bytes
[66846.969105] Status code 0; transferred 31/31
[66846.969112] -- transfer complete
[66846.969115] Bulk command transfer result=0
[66846.969117] Attempting to get CSW...
[66846.969119] xfer 13 bytes
[66846.969472] Status code 0; transferred 13/13
[66846.969479] -- transfer complete
[66846.969481] Bulk status result = 0
[66846.969484] Bulk Status S 0x53425355 T 0x3fc69 R 0 Stat 0x1
[66846.969490] -- transport indicates command failure
[66846.969492] Issuing auto-REQUEST_SENSE
[66846.969494] Bulk Command S 0x43425355 T 0x3fc6a L 96 F 128 Trg 0 LUN 1 CL 6
[66846.969502] xfer 31 bytes
[66846.969628] Status code 0; transferred 31/31
[66846.969635] -- transfer complete
[66846.969637] Bulk command transfer result=0
[66846.969640] xfer 96 bytes, 1 entries
[66846.969781] Status code -121; transferred 18/96
[66846.969788] -- short read transfer
[66846.969790] Bulk data transfer result 0x1
[66846.969793] Attempting to get CSW...
[66846.969795] xfer 13 bytes
[66846.969953] Status code -32; transferred 0/13
[66846.969957] clearing endpoint halt for pipe 0xc0008380
[66846.969960] rq=01 rqtype=02 value=0000 index=81 len=0
[66846.970319] result = 0
[66846.970322] Attempting to get CSW (2nd try)...
[66846.970324] xfer 13 bytes
[66846.970433] Status code 0; transferred 13/13
[66846.970441] -- transfer complete
[66846.970443] Bulk status result = 0
[66846.970446] Bulk Status S 0x53425355 T 0x3fc6a R 78 Stat 0x0
[66846.970451] -- Result from auto-sense is 0
[66846.970454] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66846.970459] Not Ready: Medium not present
[66846.970463] scsi cmd done, result=0x2
[66846.970470] *** thread sleeping
[66848.951717] *** thread awakened
[66848.951724] Command TEST_UNIT_READY (6 bytes)
[66848.951728] bytes: 00 00 00 00 00 00
[66848.951733] Bulk Command S 0x43425355 T 0x3fc6b L 0 F 0 Trg 0 LUN 2 CL 6
[66848.951740] xfer 31 bytes
[66848.951849] Status code 0; transferred 31/31
[66848.951856] -- transfer complete
[66848.951859] Bulk command transfer result=0
[66848.951861] Attempting to get CSW...
[66848.951863] xfer 13 bytes
[66848.952069] Status code 0; transferred 13/13
[66848.952076] -- transfer complete
[66848.952078] Bulk status result = 0
[66848.952081] Bulk Status S 0x53425355 T 0x3fc6b R 0 Stat 0x1
[66848.952086] -- transport indicates command failure
[66848.952088] Issuing auto-REQUEST_SENSE
[66848.952091] Bulk Command S 0x43425355 T 0x3fc6c L 96 F 128 Trg 0 LUN 2 CL 6
[66848.952097] xfer 31 bytes
[66848.952164] Status code 0; transferred 31/31
[66848.952168] -- transfer complete
[66848.952170] Bulk command transfer result=0
[66848.952173] xfer 96 bytes, 1 entries
[66848.952330] Status code -121; transferred 18/96
[66848.952334] -- short read transfer
[66848.952337] Bulk data transfer result 0x1
[66848.952339] Attempting to get CSW...
[66848.952341] xfer 13 bytes
[66848.952501] Status code -32; transferred 0/13
[66848.952504] clearing endpoint halt for pipe 0xc0008380
[66848.952507] rq=01 rqtype=02 value=0000 index=81 len=0
[66848.952912] result = 0
[66848.952919] Attempting to get CSW (2nd try)...
[66848.952922] xfer 13 bytes
[66848.953045] Status code 0; transferred 13/13
[66848.953052] -- transfer complete
[66848.953055] Bulk status result = 0
[66848.953057] Bulk Status S 0x53425355 T 0x3fc6c R 78 Stat 0x0
[66848.953063] -- Result from auto-sense is 0
[66848.953065] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66848.953071] Not Ready: Medium not present
[66848.953075] scsi cmd done, result=0x2
[66848.953083] *** thread sleeping
[66848.953166] *** thread awakened
[66848.953172] Command TEST_UNIT_READY (6 bytes)
[66848.953176] bytes: 00 00 00 00 00 00
[66848.953180] Bulk Command S 0x43425355 T 0x3fc6d L 0 F 0 Trg 0 LUN 0 CL 6
[66848.953186] xfer 31 bytes
[66848.953302] Status code 0; transferred 31/31
[66848.953309] -- transfer complete
[66848.953311] Bulk command transfer result=0
[66848.953314] Attempting to get CSW...
[66848.953316] xfer 13 bytes
[66848.953418] Status code 0; transferred 13/13
[66848.953425] -- transfer complete
[66848.953428] Bulk status result = 0
[66848.953431] Bulk Status S 0x53425355 T 0x3fc6d R 0 Stat 0x1
[66848.953436] -- transport indicates command failure
[66848.953438] Issuing auto-REQUEST_SENSE
[66848.953441] Bulk Command S 0x43425355 T 0x3fc6e L 96 F 128 Trg 0 LUN 0 CL 6
[66848.953447] xfer 31 bytes
[66848.953551] Status code 0; transferred 31/31
[66848.953558] -- transfer complete
[66848.953560] Bulk command transfer result=0
[66848.953574] xfer 96 bytes, 1 entries
[66848.953663] Status code -121; transferred 18/96
[66848.953668] -- short read transfer
[66848.953670] Bulk data transfer result 0x1
[66848.953673] Attempting to get CSW...
[66848.953675] xfer 13 bytes
[66848.953811] Status code -32; transferred 0/13
[66848.953815] clearing endpoint halt for pipe 0xc0008380
[66848.953818] rq=01 rqtype=02 value=0000 index=81 len=0
[66848.954163] result = 0
[66848.954166] Attempting to get CSW (2nd try)...
[66848.954168] xfer 13 bytes
[66848.954215] Status code 0; transferred 13/13
[66848.954219] -- transfer complete
[66848.954221] Bulk status result = 0
[66848.954223] Bulk Status S 0x53425355 T 0x3fc6e R 78 Stat 0x0
[66848.954228] -- Result from auto-sense is 0
[66848.954231] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66848.954236] Not Ready: Medium not present
[66848.954241] scsi cmd done, result=0x2
[66848.954247] *** thread sleeping
[66849.015766] *** thread awakened
[66849.015772] Command TEST_UNIT_READY (6 bytes)
[66849.015777] bytes: 00 00 00 00 00 00
[66849.015781] Bulk Command S 0x43425355 T 0x3fc6f L 0 F 0 Trg 0 LUN 3 CL 6
[66849.015788] xfer 31 bytes
[66849.015896] Status code 0; transferred 31/31
[66849.015903] -- transfer complete
[66849.015906] Bulk command transfer result=0
[66849.015908] Attempting to get CSW...
[66849.015910] xfer 13 bytes
[66849.016099] Status code 0; transferred 13/13
[66849.016103] -- transfer complete
[66849.016105] Bulk status result = 0
[66849.016107] Bulk Status S 0x53425355 T 0x3fc6f R 0 Stat 0x1
[66849.016113] -- transport indicates command failure
[66849.016115] Issuing auto-REQUEST_SENSE
[66849.016117] Bulk Command S 0x43425355 T 0x3fc70 L 96 F 128 Trg 0 LUN 3 CL 6
[66849.016124] xfer 31 bytes
[66849.016184] Status code 0; transferred 31/31
[66849.016187] -- transfer complete
[66849.016189] Bulk command transfer result=0
[66849.016192] xfer 96 bytes, 1 entries
[66849.016347] Status code -121; transferred 18/96
[66849.016350] -- short read transfer
[66849.016352] Bulk data transfer result 0x1
[66849.016355] Attempting to get CSW...
[66849.016356] xfer 13 bytes
[66849.016515] Status code -32; transferred 0/13
[66849.016519] clearing endpoint halt for pipe 0xc0008380
[66849.016522] rq=01 rqtype=02 value=0000 index=81 len=0
[66849.016907] result = 0
[66849.016913] Attempting to get CSW (2nd try)...
[66849.016915] xfer 13 bytes
[66849.017028] Status code 0; transferred 13/13
[66849.017037] -- transfer complete
[66849.017040] Bulk status result = 0
[66849.017042] Bulk Status S 0x53425355 T 0x3fc70 R 78 Stat 0x0
[66849.017048] -- Result from auto-sense is 0
[66849.017051] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66849.017056] Not Ready: Medium not present
[66849.017061] scsi cmd done, result=0x2
[66849.017069] *** thread sleeping
[66849.017118] *** thread awakened
[66849.017121] Command TEST_UNIT_READY (6 bytes)
[66849.017124] bytes: 00 00 00 00 00 00
[66849.017128] Bulk Command S 0x43425355 T 0x3fc71 L 0 F 0 Trg 0 LUN 1 CL 6
[66849.017134] xfer 31 bytes
[66849.017241] Status code 0; transferred 31/31
[66849.017248] -- transfer complete
[66849.017250] Bulk command transfer result=0
[66849.017253] Attempting to get CSW...
[66849.017255] xfer 13 bytes
[66849.017621] Status code 0; transferred 13/13
[66849.017628] -- transfer complete
[66849.017630] Bulk status result = 0
[66849.017633] Bulk Status S 0x53425355 T 0x3fc71 R 0 Stat 0x1
[66849.017638] -- transport indicates command failure
[66849.017641] Issuing auto-REQUEST_SENSE
[66849.017643] Bulk Command S 0x43425355 T 0x3fc72 L 96 F 128 Trg 0 LUN 1 CL 6
[66849.017650] xfer 31 bytes
[66849.017760] Status code 0; transferred 31/31
[66849.017768] -- transfer complete
[66849.017770] Bulk command transfer result=0
[66849.017773] xfer 96 bytes, 1 entries
[66849.017886] Status code -121; transferred 18/96
[66849.017893] -- short read transfer
[66849.017896] Bulk data transfer result 0x1
[66849.017898] Attempting to get CSW...
[66849.017900] xfer 13 bytes
[66849.018060] Status code -32; transferred 0/13
[66849.018064] clearing endpoint halt for pipe 0xc0008380
[66849.018067] rq=01 rqtype=02 value=0000 index=81 len=0
[66849.018455] result = 0
[66849.018461] Attempting to get CSW (2nd try)...
[66849.018463] xfer 13 bytes
[66849.018552] Status code 0; transferred 13/13
[66849.018559] -- transfer complete
[66849.018561] Bulk status result = 0
[66849.018576] Bulk Status S 0x53425355 T 0x3fc72 R 78 Stat 0x0
[66849.018582] -- Result from auto-sense is 0
[66849.018584] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66849.018589] Not Ready: Medium not present
[66849.018595] scsi cmd done, result=0x2
[66849.018601] *** thread sleeping
[66850.999795] *** thread awakened
[66850.999801] Command TEST_UNIT_READY (6 bytes)
[66850.999806] bytes: 00 00 00 00 00 00
[66850.999811] Bulk Command S 0x43425355 T 0x3fc73 L 0 F 0 Trg 0 LUN 0 CL 6
[66850.999817] xfer 31 bytes
[66850.999925] Status code 0; transferred 31/31
[66850.999932] -- transfer complete
[66850.999934] Bulk command transfer result=0
[66850.999937] Attempting to get CSW...
[66850.999939] xfer 13 bytes
[66851.000005] Status code 0; transferred 13/13
[66851.000008] -- transfer complete
[66851.000010] Bulk status result = 0
[66851.000012] Bulk Status S 0x53425355 T 0x3fc73 R 0 Stat 0x1
[66851.000017] -- transport indicates command failure
[66851.000020] Issuing auto-REQUEST_SENSE
[66851.000022] Bulk Command S 0x43425355 T 0x3fc74 L 96 F 128 Trg 0 LUN 0 CL 6
[66851.000028] xfer 31 bytes
[66851.000094] Status code 0; transferred 31/31
[66851.000097] -- transfer complete
[66851.000099] Bulk command transfer result=0
[66851.000102] xfer 96 bytes, 1 entries
[66851.000221] Status code -121; transferred 18/96
[66851.000224] -- short read transfer
[66851.000226] Bulk data transfer result 0x1
[66851.000229] Attempting to get CSW...
[66851.000231] xfer 13 bytes
[66851.000369] Status code -32; transferred 0/13
[66851.000373] clearing endpoint halt for pipe 0xc0008380
[66851.000376] rq=01 rqtype=02 value=0000 index=81 len=0
[66851.000765] result = 0
[66851.000771] Attempting to get CSW (2nd try)...
[66851.000774] xfer 13 bytes
[66851.000901] Status code 0; transferred 13/13
[66851.000908] -- transfer complete
[66851.000910] Bulk status result = 0
[66851.000913] Bulk Status S 0x53425355 T 0x3fc74 R 78 Stat 0x0
[66851.000919] -- Result from auto-sense is 0
[66851.000921] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66851.000927] Not Ready: Medium not present
[66851.000932] scsi cmd done, result=0x2
[66851.000939] *** thread sleeping
[66851.001025] *** thread awakened
[66851.001030] Command TEST_UNIT_READY (6 bytes)
[66851.001035] bytes: 00 00 00 00 00 00
[66851.001039] Bulk Command S 0x43425355 T 0x3fc75 L 0 F 0 Trg 0 LUN 2 CL 6
[66851.001045] xfer 31 bytes
[66851.001170] Status code 0; transferred 31/31
[66851.001177] -- transfer complete
[66851.001180] Bulk command transfer result=0
[66851.001182] Attempting to get CSW...
[66851.001186] xfer 13 bytes
[66851.001384] Status code 0; transferred 13/13
[66851.001391] -- transfer complete
[66851.001394] Bulk status result = 0
[66851.001396] Bulk Status S 0x53425355 T 0x3fc75 R 0 Stat 0x1
[66851.001402] -- transport indicates command failure
[66851.001404] Issuing auto-REQUEST_SENSE
[66851.001407] Bulk Command S 0x43425355 T 0x3fc76 L 96 F 128 Trg 0 LUN 2 CL 6
[66851.001413] xfer 31 bytes
[66851.001518] Status code 0; transferred 31/31
[66851.001525] -- transfer complete
[66851.001527] Bulk command transfer result=0
[66851.001531] xfer 96 bytes, 1 entries
[66851.001722] Status code -121; transferred 18/96
[66851.001730] -- short read transfer
[66851.001732] Bulk data transfer result 0x1
[66851.001735] Attempting to get CSW...
[66851.001737] xfer 13 bytes
[66851.001876] Status code -32; transferred 0/13
[66851.001880] clearing endpoint halt for pipe 0xc0008380
[66851.001883] rq=01 rqtype=02 value=0000 index=81 len=0
[66851.002226] result = 0
[66851.002229] Attempting to get CSW (2nd try)...
[66851.002231] xfer 13 bytes
[66851.002320] Status code 0; transferred 13/13
[66851.002327] -- transfer complete
[66851.002329] Bulk status result = 0
[66851.002332] Bulk Status S 0x53425355 T 0x3fc76 R 78 Stat 0x0
[66851.002337] -- Result from auto-sense is 0
[66851.002340] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66851.002345] Not Ready: Medium not present
[66851.002350] scsi cmd done, result=0x2
[66851.002357] *** thread sleeping
[66851.063659] *** thread awakened
[66851.063665] Command TEST_UNIT_READY (6 bytes)
[66851.063670] bytes: 00 00 00 00 00 00
[66851.063674] Bulk Command S 0x43425355 T 0x3fc77 L 0 F 0 Trg 0 LUN 3 CL 6
[66851.063680] xfer 31 bytes
[66851.063773] Status code 0; transferred 31/31
[66851.063780] -- transfer complete
[66851.063782] Bulk command transfer result=0
[66851.063785] Attempting to get CSW...
[66851.063787] xfer 13 bytes
[66851.064027] Status code 0; transferred 13/13
[66851.064030] -- transfer complete
[66851.064032] Bulk status result = 0
[66851.064035] Bulk Status S 0x53425355 T 0x3fc77 R 0 Stat 0x1
[66851.064040] -- transport indicates command failure
[66851.064042] Issuing auto-REQUEST_SENSE
[66851.064045] Bulk Command S 0x43425355 T 0x3fc78 L 96 F 128 Trg 0 LUN 3 CL 6
[66851.064051] xfer 31 bytes
[66851.064107] Status code 0; transferred 31/31
[66851.064110] -- transfer complete
[66851.064112] Bulk command transfer result=0
[66851.064114] xfer 96 bytes, 1 entries
[66851.064263] Status code -121; transferred 18/96
[66851.064267] -- short read transfer
[66851.064269] Bulk data transfer result 0x1
[66851.064271] Attempting to get CSW...
[66851.064273] xfer 13 bytes
[66851.064440] Status code -32; transferred 0/13
[66851.064443] clearing endpoint halt for pipe 0xc0008380
[66851.064446] rq=01 rqtype=02 value=0000 index=81 len=0
[66851.064850] result = 0
[66851.064856] Attempting to get CSW (2nd try)...
[66851.064858] xfer 13 bytes
[66851.064964] Status code 0; transferred 13/13
[66851.064971] -- transfer complete
[66851.064973] Bulk status result = 0
[66851.064976] Bulk Status S 0x53425355 T 0x3fc78 R 78 Stat 0x0
[66851.064982] -- Result from auto-sense is 0
[66851.064984] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66851.064990] Not Ready: Medium not present
[66851.064994] scsi cmd done, result=0x2
[66851.065002] *** thread sleeping
[66851.065106] *** thread awakened
[66851.065112] Command TEST_UNIT_READY (6 bytes)
[66851.065116] bytes: 00 00 00 00 00 00
[66851.065120] Bulk Command S 0x43425355 T 0x3fc79 L 0 F 0 Trg 0 LUN 1 CL 6
[66851.065127] xfer 31 bytes
[66851.065232] Status code 0; transferred 31/31
[66851.065240] -- transfer complete
[66851.065242] Bulk command transfer result=0
[66851.065244] Attempting to get CSW...
[66851.065246] xfer 13 bytes
[66851.065598] Status code 0; transferred 13/13
[66851.065605] -- transfer complete
[66851.065607] Bulk status result = 0
[66851.065610] Bulk Status S 0x53425355 T 0x3fc79 R 0 Stat 0x1
[66851.065615] -- transport indicates command failure
[66851.065617] Issuing auto-REQUEST_SENSE
[66851.065620] Bulk Command S 0x43425355 T 0x3fc7a L 96 F 128 Trg 0 LUN 1 CL 6
[66851.065626] xfer 31 bytes
[66851.065749] Status code 0; transferred 31/31
[66851.065756] -- transfer complete
[66851.065759] Bulk command transfer result=0
[66851.065761] xfer 96 bytes, 1 entries
[66851.065888] Status code -121; transferred 18/96
[66851.065896] -- short read transfer
[66851.065898] Bulk data transfer result 0x1
[66851.065901] Attempting to get CSW...
[66851.065903] xfer 13 bytes
[66851.066112] Status code -32; transferred 0/13
[66851.066119] clearing endpoint halt for pipe 0xc0008380
[66851.066122] rq=01 rqtype=02 value=0000 index=81 len=0
[66851.066465] result = 0
[66851.066468] Attempting to get CSW (2nd try)...
[66851.066470] xfer 13 bytes
[66851.066529] Status code 0; transferred 13/13
[66851.066534] -- transfer complete
[66851.066537] Bulk status result = 0
[66851.066539] Bulk Status S 0x53425355 T 0x3fc7a R 78 Stat 0x0
[66851.066544] -- Result from auto-sense is 0
[66851.066547] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66851.066552] Not Ready: Medium not present
[66851.066556] scsi cmd done, result=0x2
[66851.066574] *** thread sleeping
[66853.047730] *** thread awakened
[66853.047737] Command TEST_UNIT_READY (6 bytes)
[66853.047741] bytes: 00 00 00 00 00 00
[66853.047746] Bulk Command S 0x43425355 T 0x3fc7b L 0 F 0 Trg 0 LUN 2 CL 6
[66853.047753] xfer 31 bytes
[66853.047862] Status code 0; transferred 31/31
[66853.047870] -- transfer complete
[66853.047872] Bulk command transfer result=0
[66853.047875] Attempting to get CSW...
[66853.047877] xfer 13 bytes
[66853.048055] Status code 0; transferred 13/13
[66853.048058] -- transfer complete
[66853.048060] Bulk status result = 0
[66853.048062] Bulk Status S 0x53425355 T 0x3fc7b R 0 Stat 0x1
[66853.048067] -- transport indicates command failure
[66853.048070] Issuing auto-REQUEST_SENSE
[66853.048072] Bulk Command S 0x43425355 T 0x3fc7c L 96 F 128 Trg 0 LUN 2 CL 6
[66853.048079] xfer 31 bytes
[66853.048144] Status code 0; transferred 31/31
[66853.048147] -- transfer complete
[66853.048149] Bulk command transfer result=0
[66853.048152] xfer 96 bytes, 1 entries
[66853.048299] Status code -121; transferred 18/96
[66853.048302] -- short read transfer
[66853.048304] Bulk data transfer result 0x1
[66853.048307] Attempting to get CSW...
[66853.048309] xfer 13 bytes
[66853.048449] Status code -32; transferred 0/13
[66853.048453] clearing endpoint halt for pipe 0xc0008380
[66853.048456] rq=01 rqtype=02 value=0000 index=81 len=0
[66853.048860] result = 0
[66853.048866] Attempting to get CSW (2nd try)...
[66853.048868] xfer 13 bytes
[66853.048993] Status code 0; transferred 13/13
[66853.049000] -- transfer complete
[66853.049002] Bulk status result = 0
[66853.049006] Bulk Status S 0x53425355 T 0x3fc7c R 78 Stat 0x0
[66853.049012] -- Result from auto-sense is 0
[66853.049015] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66853.049020] Not Ready: Medium not present
[66853.049025] scsi cmd done, result=0x2
[66853.049033] *** thread sleeping
[66853.049118] *** thread awakened
[66853.049123] Command TEST_UNIT_READY (6 bytes)
[66853.049128] bytes: 00 00 00 00 00 00
[66853.049132] Bulk Command S 0x43425355 T 0x3fc7d L 0 F 0 Trg 0 LUN 0 CL 6
[66853.049139] xfer 31 bytes
[66853.049263] Status code 0; transferred 31/31
[66853.049271] -- transfer complete
[66853.049273] Bulk command transfer result=0
[66853.049276] Attempting to get CSW...
[66853.049278] xfer 13 bytes
[66853.049385] Status code 0; transferred 13/13
[66853.049392] -- transfer complete
[66853.049395] Bulk status result = 0
[66853.049398] Bulk Status S 0x53425355 T 0x3fc7d R 0 Stat 0x1
[66853.049404] -- transport indicates command failure
[66853.049406] Issuing auto-REQUEST_SENSE
[66853.049408] Bulk Command S 0x43425355 T 0x3fc7e L 96 F 128 Trg 0 LUN 0 CL 6
[66853.049414] xfer 31 bytes
[66853.049520] Status code 0; transferred 31/31
[66853.049527] -- transfer complete
[66853.049529] Bulk command transfer result=0
[66853.049532] xfer 96 bytes, 1 entries
[66853.049723] Status code -121; transferred 18/96
[66853.049730] -- short read transfer
[66853.049732] Bulk data transfer result 0x1
[66853.049735] Attempting to get CSW...
[66853.049737] xfer 13 bytes
[66853.049878] Status code -32; transferred 0/13
[66853.049882] clearing endpoint halt for pipe 0xc0008380
[66853.049885] rq=01 rqtype=02 value=0000 index=81 len=0
[66853.050229] result = 0
[66853.050232] Attempting to get CSW (2nd try)...
[66853.050234] xfer 13 bytes
[66853.050289] Status code 0; transferred 13/13
[66853.050292] -- transfer complete
[66853.050294] Bulk status result = 0
[66853.050297] Bulk Status S 0x53425355 T 0x3fc7e R 78 Stat 0x0
[66853.050302] -- Result from auto-sense is 0
[66853.050305] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66853.050310] Not Ready: Medium not present
[66853.050314] scsi cmd done, result=0x2
[66853.050320] *** thread sleeping
[66853.111782] *** thread awakened
[66853.111788] Command TEST_UNIT_READY (6 bytes)
[66853.111793] bytes: 00 00 00 00 00 00
[66853.111798] Bulk Command S 0x43425355 T 0x3fc7f L 0 F 0 Trg 0 LUN 1 CL 6
[66853.111804] xfer 31 bytes
[66853.111871] Status code 0; transferred 31/31
[66853.111875] -- transfer complete
[66853.111877] Bulk command transfer result=0
[66853.111880] Attempting to get CSW...
[66853.111881] xfer 13 bytes
[66853.112109] Status code 0; transferred 13/13
[66853.112112] -- transfer complete
[66853.112114] Bulk status result = 0
[66853.112116] Bulk Status S 0x53425355 T 0x3fc7f R 0 Stat 0x1
[66853.112121] -- transport indicates command failure
[66853.112123] Issuing auto-REQUEST_SENSE
[66853.112126] Bulk Command S 0x43425355 T 0x3fc80 L 96 F 128 Trg 0 LUN 1 CL 6
[66853.112131] xfer 31 bytes
[66853.112185] Status code 0; transferred 31/31
[66853.112188] -- transfer complete
[66853.112190] Bulk command transfer result=0
[66853.112192] xfer 96 bytes, 1 entries
[66853.112313] Status code -121; transferred 18/96
[66853.112316] -- short read transfer
[66853.112318] Bulk data transfer result 0x1
[66853.112320] Attempting to get CSW...
[66853.112322] xfer 13 bytes
[66853.112462] Status code -32; transferred 0/13
[66853.112466] clearing endpoint halt for pipe 0xc0008380
[66853.112468] rq=01 rqtype=02 value=0000 index=81 len=0
[66853.112873] result = 0
[66853.112880] Attempting to get CSW (2nd try)...
[66853.112882] xfer 13 bytes
[66853.113007] Status code 0; transferred 13/13
[66853.113014] -- transfer complete
[66853.113017] Bulk status result = 0
[66853.113020] Bulk Status S 0x53425355 T 0x3fc80 R 78 Stat 0x0
[66853.113026] -- Result from auto-sense is 0
[66853.113029] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66853.113035] Not Ready: Medium not present
[66853.113039] scsi cmd done, result=0x2
[66853.113047] *** thread sleeping
[66853.113135] *** thread awakened
[66853.113141] Command TEST_UNIT_READY (6 bytes)
[66853.113145] bytes: 00 00 00 00 00 00
[66853.113149] Bulk Command S 0x43425355 T 0x3fc81 L 0 F 0 Trg 0 LUN 3 CL 6
[66853.113156] xfer 31 bytes
[66853.113282] Status code 0; transferred 31/31
[66853.113289] -- transfer complete
[66853.113291] Bulk command transfer result=0
[66853.113294] Attempting to get CSW...
[66853.113296] xfer 13 bytes
[66853.113511] Status code 0; transferred 13/13
[66853.113518] -- transfer complete
[66853.113520] Bulk status result = 0
[66853.113523] Bulk Status S 0x53425355 T 0x3fc81 R 0 Stat 0x1
[66853.113528] -- transport indicates command failure
[66853.113531] Issuing auto-REQUEST_SENSE
[66853.113534] Bulk Command S 0x43425355 T 0x3fc82 L 96 F 128 Trg 0 LUN 3 CL 6
[66853.113540] xfer 31 bytes
[66853.113645] Status code 0; transferred 31/31
[66853.113652] -- transfer complete
[66853.113654] Bulk command transfer result=0
[66853.113657] xfer 96 bytes, 1 entries
[66853.113785] Status code -121; transferred 18/96
[66853.113792] -- short read transfer
[66853.113795] Bulk data transfer result 0x1
[66853.113798] Attempting to get CSW...
[66853.113800] xfer 13 bytes
[66853.113938] Status code -32; transferred 0/13
[66853.113943] clearing endpoint halt for pipe 0xc0008380
[66853.113946] rq=01 rqtype=02 value=0000 index=81 len=0
[66853.114307] result = 0
[66853.114313] Attempting to get CSW (2nd try)...
[66853.114315] xfer 13 bytes
[66853.114404] Status code 0; transferred 13/13
[66853.114411] -- transfer complete
[66853.114415] Bulk status result = 0
[66853.114418] Bulk Status S 0x53425355 T 0x3fc82 R 78 Stat 0x0
[66853.114423] -- Result from auto-sense is 0
[66853.114426] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66853.114431] Not Ready: Medium not present
[66853.114435] scsi cmd done, result=0x2
[66853.114445] *** thread sleeping
[66855.095668] *** thread awakened
[66855.095674] Command TEST_UNIT_READY (6 bytes)
[66855.095679] bytes: 00 00 00 00 00 00
[66855.095684] Bulk Command S 0x43425355 T 0x3fc83 L 0 F 0 Trg 0 LUN 0 CL 6
[66855.095690] xfer 31 bytes
[66855.095815] Status code 0; transferred 31/31
[66855.095822] -- transfer complete
[66855.095824] Bulk command transfer result=0
[66855.095827] Attempting to get CSW...
[66855.095829] xfer 13 bytes
[66855.095902] Status code 0; transferred 13/13
[66855.095906] -- transfer complete
[66855.095908] Bulk status result = 0
[66855.095910] Bulk Status S 0x53425355 T 0x3fc83 R 0 Stat 0x1
[66855.095915] -- transport indicates command failure
[66855.095917] Issuing auto-REQUEST_SENSE
[66855.095920] Bulk Command S 0x43425355 T 0x3fc84 L 96 F 128 Trg 0 LUN 0 CL 6
[66855.095926] xfer 31 bytes
[66855.095997] Status code 0; transferred 31/31
[66855.096000] -- transfer complete
[66855.096002] Bulk command transfer result=0
[66855.096004] xfer 96 bytes, 1 entries
[66855.096127] Status code -121; transferred 18/96
[66855.096131] -- short read transfer
[66855.096133] Bulk data transfer result 0x1
[66855.096135] Attempting to get CSW...
[66855.096137] xfer 13 bytes
[66855.096314] Status code -32; transferred 0/13
[66855.096318] clearing endpoint halt for pipe 0xc0008380
[66855.096321] rq=01 rqtype=02 value=0000 index=81 len=0
[66855.096713] result = 0
[66855.096719] Attempting to get CSW (2nd try)...
[66855.096722] xfer 13 bytes
[66855.096750] Status code 0; transferred 13/13
[66855.096755] -- transfer complete
[66855.096756] Bulk status result = 0
[66855.096759] Bulk Status S 0x53425355 T 0x3fc84 R 78 Stat 0x0
[66855.096765] -- Result from auto-sense is 0
[66855.096767] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66855.096772] Not Ready: Medium not present
[66855.096777] scsi cmd done, result=0x2
[66855.096784] *** thread sleeping
[66855.096879] *** thread awakened
[66855.096885] Command TEST_UNIT_READY (6 bytes)
[66855.096889] bytes: 00 00 00 00 00 00
[66855.096894] Bulk Command S 0x43425355 T 0x3fc85 L 0 F 0 Trg 0 LUN 2 CL 6
[66855.096900] xfer 31 bytes
[66855.096942] Status code 0; transferred 31/31
[66855.096946] -- transfer complete
[66855.096949] Bulk command transfer result=0
[66855.096951] Attempting to get CSW...
[66855.096953] xfer 13 bytes
[66855.097234] Status code 0; transferred 13/13
[66855.097241] -- transfer complete
[66855.097243] Bulk status result = 0
[66855.097245] Bulk Status S 0x53425355 T 0x3fc85 R 0 Stat 0x1
[66855.097251] -- transport indicates command failure
[66855.097253] Issuing auto-REQUEST_SENSE
[66855.097255] Bulk Command S 0x43425355 T 0x3fc86 L 96 F 128 Trg 0 LUN 2 CL 6
[66855.097262] xfer 31 bytes
[66855.097384] Status code 0; transferred 31/31
[66855.097391] -- transfer complete
[66855.097394] Bulk command transfer result=0
[66855.097396] xfer 96 bytes, 1 entries
[66855.097536] Status code -121; transferred 18/96
[66855.097543] -- short read transfer
[66855.097546] Bulk data transfer result 0x1
[66855.097550] Attempting to get CSW...
[66855.097552] xfer 13 bytes
[66855.097726] Status code -32; transferred 0/13
[66855.097730] clearing endpoint halt for pipe 0xc0008380
[66855.097733] rq=01 rqtype=02 value=0000 index=81 len=0
[66855.098139] result = 0
[66855.098145] Attempting to get CSW (2nd try)...
[66855.098148] xfer 13 bytes
[66855.098280] Status code 0; transferred 13/13
[66855.098287] -- transfer complete
[66855.098290] Bulk status result = 0
[66855.098292] Bulk Status S 0x53425355 T 0x3fc86 R 78 Stat 0x0
[66855.098298] -- Result from auto-sense is 0
[66855.098300] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66855.098306] Not Ready: Medium not present
[66855.098310] scsi cmd done, result=0x2
[66855.098317] *** thread sleeping
[66855.159759] *** thread awakened
[66855.159766] Command TEST_UNIT_READY (6 bytes)
[66855.159771] bytes: 00 00 00 00 00 00
[66855.159775] Bulk Command S 0x43425355 T 0x3fc87 L 0 F 0 Trg 0 LUN 1 CL 6
[66855.159782] xfer 31 bytes
[66855.159913] Status code 0; transferred 31/31
[66855.159920] -- transfer complete
[66855.159923] Bulk command transfer result=0
[66855.159925] Attempting to get CSW...
[66855.159928] xfer 13 bytes
[66855.160253] Status code 0; transferred 13/13
[66855.160256] -- transfer complete
[66855.160258] Bulk status result = 0
[66855.160260] Bulk Status S 0x53425355 T 0x3fc87 R 0 Stat 0x1
[66855.160266] -- transport indicates command failure
[66855.160268] Issuing auto-REQUEST_SENSE
[66855.160270] Bulk Command S 0x43425355 T 0x3fc88 L 96 F 128 Trg 0 LUN 1 CL 6
[66855.160277] xfer 31 bytes
[66855.160339] Status code 0; transferred 31/31
[66855.160342] -- transfer complete
[66855.160344] Bulk command transfer result=0
[66855.160347] xfer 96 bytes, 1 entries
[66855.160474] Status code -121; transferred 18/96
[66855.160478] -- short read transfer
[66855.160480] Bulk data transfer result 0x1
[66855.160482] Attempting to get CSW...
[66855.160484] xfer 13 bytes
[66855.160683] Status code -32; transferred 0/13
[66855.160690] clearing endpoint halt for pipe 0xc0008380
[66855.160695] rq=01 rqtype=02 value=0000 index=81 len=0
[66855.161097] result = 0
[66855.161103] Attempting to get CSW (2nd try)...
[66855.161105] xfer 13 bytes
[66855.161208] Status code 0; transferred 13/13
[66855.161215] -- transfer complete
[66855.161218] Bulk status result = 0
[66855.161220] Bulk Status S 0x53425355 T 0x3fc88 R 78 Stat 0x0
[66855.161226] -- Result from auto-sense is 0
[66855.161229] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66855.161234] Not Ready: Medium not present
[66855.161239] scsi cmd done, result=0x2
[66855.161247] *** thread sleeping
[66855.161339] *** thread awakened
[66855.161347] Command TEST_UNIT_READY (6 bytes)
[66855.161352] bytes: 00 00 00 00 00 00
[66855.161356] Bulk Command S 0x43425355 T 0x3fc89 L 0 F 0 Trg 0 LUN 3 CL 6
[66855.161362] xfer 31 bytes
[66855.161465] Status code 0; transferred 31/31
[66855.161472] -- transfer complete
[66855.161474] Bulk command transfer result=0
[66855.161477] Attempting to get CSW...
[66855.161479] xfer 13 bytes
[66855.161718] Status code 0; transferred 13/13
[66855.161725] -- transfer complete
[66855.161728] Bulk status result = 0
[66855.161730] Bulk Status S 0x53425355 T 0x3fc89 R 0 Stat 0x1
[66855.161736] -- transport indicates command failure
[66855.161738] Issuing auto-REQUEST_SENSE
[66855.161740] Bulk Command S 0x43425355 T 0x3fc8a L 96 F 128 Trg 0 LUN 3 CL 6
[66855.161747] xfer 31 bytes
[66855.161811] Status code 0; transferred 31/31
[66855.161815] -- transfer complete
[66855.161817] Bulk command transfer result=0
[66855.161819] xfer 96 bytes, 1 entries
[66855.161946] Status code -121; transferred 18/96
[66855.161950] -- short read transfer
[66855.161952] Bulk data transfer result 0x1
[66855.161955] Attempting to get CSW...
[66855.161956] xfer 13 bytes
[66855.162154] Status code -32; transferred 0/13
[66855.162161] clearing endpoint halt for pipe 0xc0008380
[66855.162164] rq=01 rqtype=02 value=0000 index=81 len=0
[66855.162540] result = 0
[66855.162546] Attempting to get CSW (2nd try)...
[66855.162548] xfer 13 bytes
[66855.162654] Status code 0; transferred 13/13
[66855.162661] -- transfer complete
[66855.162664] Bulk status result = 0
[66855.162667] Bulk Status S 0x53425355 T 0x3fc8a R 78 Stat 0x0
[66855.162673] -- Result from auto-sense is 0
[66855.162675] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66855.162681] Not Ready: Medium not present
[66855.162685] scsi cmd done, result=0x2
[66855.162692] *** thread sleeping
[66857.143655] *** thread awakened
[66857.143661] Command TEST_UNIT_READY (6 bytes)
[66857.143666] bytes: 00 00 00 00 00 00
[66857.143670] Bulk Command S 0x43425355 T 0x3fc8b L 0 F 0 Trg 0 LUN 2 CL 6
[66857.143676] xfer 31 bytes
[66857.143755] Status code 0; transferred 31/31
[66857.143758] -- transfer complete
[66857.143760] Bulk command transfer result=0
[66857.143762] Attempting to get CSW...
[66857.143764] xfer 13 bytes
[66857.143976] Status code 0; transferred 13/13
[66857.143979] -- transfer complete
[66857.143980] Bulk status result = 0
[66857.143982] Bulk Status S 0x53425355 T 0x3fc8b R 0 Stat 0x1
[66857.143987] -- transport indicates command failure
[66857.143989] Issuing auto-REQUEST_SENSE
[66857.143991] Bulk Command S 0x43425355 T 0x3fc8c L 96 F 128 Trg 0 LUN 2 CL 6
[66857.143996] xfer 31 bytes
[66857.144066] Status code 0; transferred 31/31
[66857.144069] -- transfer complete
[66857.144070] Bulk command transfer result=0
[66857.144073] xfer 96 bytes, 1 entries
[66857.144228] Status code -121; transferred 18/96
[66857.144232] -- short read transfer
[66857.144233] Bulk data transfer result 0x1
[66857.144236] Attempting to get CSW...
[66857.144237] xfer 13 bytes
[66857.144409] Status code -32; transferred 0/13
[66857.144412] clearing endpoint halt for pipe 0xc0008380
[66857.144414] rq=01 rqtype=02 value=0000 index=81 len=0
[66857.144818] result = 0
[66857.144823] Attempting to get CSW (2nd try)...
[66857.144826] xfer 13 bytes
[66857.144945] Status code 0; transferred 13/13
[66857.144951] -- transfer complete
[66857.144955] Bulk status result = 0
[66857.144958] Bulk Status S 0x53425355 T 0x3fc8c R 78 Stat 0x0
[66857.144963] -- Result from auto-sense is 0
[66857.144965] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66857.144970] Not Ready: Medium not present
[66857.144974] scsi cmd done, result=0x2
[66857.144983] *** thread sleeping
[66857.145029] *** thread awakened
[66857.145032] Command TEST_UNIT_READY (6 bytes)
[66857.145035] bytes: 00 00 00 00 00 00
[66857.145039] Bulk Command S 0x43425355 T 0x3fc8d L 0 F 0 Trg 0 LUN 0 CL 6
[66857.145045] xfer 31 bytes
[66857.145162] Status code 0; transferred 31/31
[66857.145168] -- transfer complete
[66857.145170] Bulk command transfer result=0
[66857.145172] Attempting to get CSW...
[66857.145174] xfer 13 bytes
[66857.145294] Status code 0; transferred 13/13
[66857.145300] -- transfer complete
[66857.145302] Bulk status result = 0
[66857.145305] Bulk Status S 0x53425355 T 0x3fc8d R 0 Stat 0x1
[66857.145310] -- transport indicates command failure
[66857.145311] Issuing auto-REQUEST_SENSE
[66857.145314] Bulk Command S 0x43425355 T 0x3fc8e L 96 F 128 Trg 0 LUN 0 CL 6
[66857.145319] xfer 31 bytes
[66857.145436] Status code 0; transferred 31/31
[66857.145443] -- transfer complete
[66857.145445] Bulk command transfer result=0
[66857.145447] xfer 96 bytes, 1 entries
[66857.145591] Status code -121; transferred 18/96
[66857.145597] -- short read transfer
[66857.145599] Bulk data transfer result 0x1
[66857.145602] Attempting to get CSW...
[66857.145604] xfer 13 bytes
[66857.145761] Status code -32; transferred 0/13
[66857.145765] clearing endpoint halt for pipe 0xc0008380
[66857.145768] rq=01 rqtype=02 value=0000 index=81 len=0
[66857.146119] result = 0
[66857.146121] Attempting to get CSW (2nd try)...
[66857.146123] xfer 13 bytes
[66857.146177] Status code 0; transferred 13/13
[66857.146180] -- transfer complete
[66857.146183] Bulk status result = 0
[66857.146185] Bulk Status S 0x53425355 T 0x3fc8e R 78 Stat 0x0
[66857.146190] -- Result from auto-sense is 0
[66857.146192] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66857.146197] Not Ready: Medium not present
[66857.146201] scsi cmd done, result=0x2
[66857.146207] *** thread sleeping
[66857.207709] *** thread awakened
[66857.207715] Command TEST_UNIT_READY (6 bytes)
[66857.207720] bytes: 00 00 00 00 00 00
[66857.207724] Bulk Command S 0x43425355 T 0x3fc8f L 0 F 0 Trg 0 LUN 3 CL 6
[66857.207731] xfer 31 bytes
[66857.207859] Status code 0; transferred 31/31
[66857.207866] -- transfer complete
[66857.207868] Bulk command transfer result=0
[66857.207871] Attempting to get CSW...
[66857.207873] xfer 13 bytes
[66857.207946] Status code 0; transferred 13/13
[66857.207949] -- transfer complete
[66857.207951] Bulk status result = 0
[66857.207953] Bulk Status S 0x53425355 T 0x3fc8f R 0 Stat 0x1
[66857.207959] -- transport indicates command failure
[66857.207961] Issuing auto-REQUEST_SENSE
[66857.207964] Bulk Command S 0x43425355 T 0x3fc90 L 96 F 128 Trg 0 LUN 3 CL 6
[66857.207970] xfer 31 bytes
[66857.208040] Status code 0; transferred 31/31
[66857.208043] -- transfer complete
[66857.208045] Bulk command transfer result=0
[66857.208048] xfer 96 bytes, 1 entries
[66857.208188] Status code -121; transferred 18/96
[66857.208192] -- short read transfer
[66857.208194] Bulk data transfer result 0x1
[66857.208196] Attempting to get CSW...
[66857.208198] xfer 13 bytes
[66857.208355] Status code -32; transferred 0/13
[66857.208359] clearing endpoint halt for pipe 0xc0008380
[66857.208362] rq=01 rqtype=02 value=0000 index=81 len=0
[66857.208742] result = 0
[66857.208747] Attempting to get CSW (2nd try)...
[66857.208750] xfer 13 bytes
[66857.208853] Status code 0; transferred 13/13
[66857.208860] -- transfer complete
[66857.208864] Bulk status result = 0
[66857.208867] Bulk Status S 0x53425355 T 0x3fc90 R 78 Stat 0x0
[66857.208873] -- Result from auto-sense is 0
[66857.208876] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66857.208881] Not Ready: Medium not present
[66857.208886] scsi cmd done, result=0x2
[66857.208895] *** thread sleeping
[66857.209001] *** thread awakened
[66857.209006] Command TEST_UNIT_READY (6 bytes)
[66857.209011] bytes: 00 00 00 00 00 00
[66857.209016] Bulk Command S 0x43425355 T 0x3fc91 L 0 F 0 Trg 0 LUN 1 CL 6
[66857.209023] xfer 31 bytes
[66857.209127] Status code 0; transferred 31/31
[66857.209134] -- transfer complete
[66857.209137] Bulk command transfer result=0
[66857.209139] Attempting to get CSW...
[66857.209142] xfer 13 bytes
[66857.209495] Status code 0; transferred 13/13
[66857.209502] -- transfer complete
[66857.209504] Bulk status result = 0
[66857.209509] Bulk Status S 0x53425355 T 0x3fc91 R 0 Stat 0x1
[66857.209514] -- transport indicates command failure
[66857.209516] Issuing auto-REQUEST_SENSE
[66857.209519] Bulk Command S 0x43425355 T 0x3fc92 L 96 F 128 Trg 0 LUN 1 CL 6
[66857.209525] xfer 31 bytes
[66857.209654] Status code 0; transferred 31/31
[66857.209661] -- transfer complete
[66857.209664] Bulk command transfer result=0
[66857.209666] xfer 96 bytes, 1 entries
[66857.209793] Status code -121; transferred 18/96
[66857.209801] -- short read transfer
[66857.209804] Bulk data transfer result 0x1
[66857.209807] Attempting to get CSW...
[66857.209809] xfer 13 bytes
[66857.209985] Status code -32; transferred 0/13
[66857.209989] clearing endpoint halt for pipe 0xc0008380
[66857.209992] rq=01 rqtype=02 value=0000 index=81 len=0
[66857.210348] result = 0
[66857.210351] Attempting to get CSW (2nd try)...
[66857.210353] xfer 13 bytes
[66857.210459] Status code 0; transferred 13/13
[66857.210466] -- transfer complete
[66857.210469] Bulk status result = 0
[66857.210471] Bulk Status S 0x53425355 T 0x3fc92 R 78 Stat 0x0
[66857.210477] -- Result from auto-sense is 0
[66857.210479] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66857.210484] Not Ready: Medium not present
[66857.210488] scsi cmd done, result=0x2
[66857.210496] *** thread sleeping
[66859.191670] *** thread awakened
[66859.191677] Command TEST_UNIT_READY (6 bytes)
[66859.191681] bytes: 00 00 00 00 00 00
[66859.191685] Bulk Command S 0x43425355 T 0x3fc93 L 0 F 0 Trg 0 LUN 0 CL 6
[66859.191692] xfer 31 bytes
[66859.191823] Status code 0; transferred 31/31
[66859.191830] -- transfer complete
[66859.191833] Bulk command transfer result=0
[66859.191836] Attempting to get CSW...
[66859.191838] xfer 13 bytes
[66859.191911] Status code 0; transferred 13/13
[66859.191914] -- transfer complete
[66859.191916] Bulk status result = 0
[66859.191919] Bulk Status S 0x53425355 T 0x3fc93 R 0 Stat 0x1
[66859.191924] -- transport indicates command failure
[66859.191926] Issuing auto-REQUEST_SENSE
[66859.191929] Bulk Command S 0x43425355 T 0x3fc94 L 96 F 128 Trg 0 LUN 0 CL 6
[66859.191935] xfer 31 bytes
[66859.192008] Status code 0; transferred 31/31
[66859.192011] -- transfer complete
[66859.192013] Bulk command transfer result=0
[66859.192016] xfer 96 bytes, 1 entries
[66859.192148] Status code -121; transferred 18/96
[66859.192152] -- short read transfer
[66859.192154] Bulk data transfer result 0x1
[66859.192156] Attempting to get CSW...
[66859.192158] xfer 13 bytes
[66859.192323] Status code -32; transferred 0/13
[66859.192327] clearing endpoint halt for pipe 0xc0008380
[66859.192329] rq=01 rqtype=02 value=0000 index=81 len=0
[66859.192729] result = 0
[66859.192735] Attempting to get CSW (2nd try)...
[66859.192738] xfer 13 bytes
[66859.192842] Status code 0; transferred 13/13
[66859.192849] -- transfer complete
[66859.192852] Bulk status result = 0
[66859.192854] Bulk Status S 0x53425355 T 0x3fc94 R 78 Stat 0x0
[66859.192861] -- Result from auto-sense is 0
[66859.192863] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66859.192869] Not Ready: Medium not present
[66859.192873] scsi cmd done, result=0x2
[66859.192881] *** thread sleeping
[66859.192969] *** thread awakened
[66859.192977] Command TEST_UNIT_READY (6 bytes)
[66859.192982] bytes: 00 00 00 00 00 00
[66859.192986] Bulk Command S 0x43425355 T 0x3fc95 L 0 F 0 Trg 0 LUN 2 CL 6
[66859.192992] xfer 31 bytes
[66859.193095] Status code 0; transferred 31/31
[66859.193102] -- transfer complete
[66859.193105] Bulk command transfer result=0
[66859.193107] Attempting to get CSW...
[66859.193109] xfer 13 bytes
[66859.193321] Status code 0; transferred 13/13
[66859.193328] -- transfer complete
[66859.193330] Bulk status result = 0
[66859.193333] Bulk Status S 0x53425355 T 0x3fc95 R 0 Stat 0x1
[66859.193338] -- transport indicates command failure
[66859.193340] Issuing auto-REQUEST_SENSE
[66859.193343] Bulk Command S 0x43425355 T 0x3fc96 L 96 F 128 Trg 0 LUN 2 CL 6
[66859.193349] xfer 31 bytes
[66859.193452] Status code 0; transferred 31/31
[66859.193459] -- transfer complete
[66859.193461] Bulk command transfer result=0
[66859.193464] xfer 96 bytes, 1 entries
[66859.193616] Status code -121; transferred 18/96
[66859.193623] -- short read transfer
[66859.193625] Bulk data transfer result 0x1
[66859.193630] Attempting to get CSW...
[66859.193632] xfer 13 bytes
[66859.193771] Status code -32; transferred 0/13
[66859.193776] clearing endpoint halt for pipe 0xc0008380
[66859.193779] rq=01 rqtype=02 value=0000 index=81 len=0
[66859.194126] result = 0
[66859.194129] Attempting to get CSW (2nd try)...
[66859.194131] xfer 13 bytes
[66859.194217] Status code 0; transferred 13/13
[66859.194224] -- transfer complete
[66859.194226] Bulk status result = 0
[66859.194229] Bulk Status S 0x53425355 T 0x3fc96 R 78 Stat 0x0
[66859.194235] -- Result from auto-sense is 0
[66859.194237] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66859.194243] Not Ready: Medium not present
[66859.194248] scsi cmd done, result=0x2
[66859.194255] *** thread sleeping
[66859.255697] *** thread awakened
[66859.255703] Command TEST_UNIT_READY (6 bytes)
[66859.255708] bytes: 00 00 00 00 00 00
[66859.255712] Bulk Command S 0x43425355 T 0x3fc97 L 0 F 0 Trg 0 LUN 3 CL 6
[66859.255719] xfer 31 bytes
[66859.255814] Status code 0; transferred 31/31
[66859.255822] -- transfer complete
[66859.255824] Bulk command transfer result=0
[66859.255827] Attempting to get CSW...
[66859.255829] xfer 13 bytes
[66859.256118] Status code 0; transferred 13/13
[66859.256126] -- transfer complete
[66859.256128] Bulk status result = 0
[66859.256131] Bulk Status S 0x53425355 T 0x3fc97 R 0 Stat 0x1
[66859.256136] -- transport indicates command failure
[66859.256139] Issuing auto-REQUEST_SENSE
[66859.256141] Bulk Command S 0x43425355 T 0x3fc98 L 96 F 128 Trg 0 LUN 3 CL 6
[66859.256148] xfer 31 bytes
[66859.256208] Status code 0; transferred 31/31
[66859.256212] -- transfer complete
[66859.256214] Bulk command transfer result=0
[66859.256216] xfer 96 bytes, 1 entries
[66859.256361] Status code -121; transferred 18/96
[66859.256365] -- short read transfer
[66859.256366] Bulk data transfer result 0x1
[66859.256369] Attempting to get CSW...
[66859.256371] xfer 13 bytes
[66859.256513] Status code -32; transferred 0/13
[66859.256517] clearing endpoint halt for pipe 0xc0008380
[66859.256520] rq=01 rqtype=02 value=0000 index=81 len=0
[66859.256923] result = 0
[66859.256929] Attempting to get CSW (2nd try)...
[66859.256932] xfer 13 bytes
[66859.257056] Status code 0; transferred 13/13
[66859.257065] -- transfer complete
[66859.257068] Bulk status result = 0
[66859.257070] Bulk Status S 0x53425355 T 0x3fc98 R 78 Stat 0x0
[66859.257076] -- Result from auto-sense is 0
[66859.257079] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66859.257084] Not Ready: Medium not present
[66859.257090] scsi cmd done, result=0x2
[66859.257098] *** thread sleeping
[66859.257225] *** thread awakened
[66859.257231] Command TEST_UNIT_READY (6 bytes)
[66859.257235] bytes: 00 00 00 00 00 00
[66859.257242] Bulk Command S 0x43425355 T 0x3fc99 L 0 F 0 Trg 0 LUN 1 CL 6
[66859.257249] xfer 31 bytes
[66859.257372] Status code 0; transferred 31/31
[66859.257379] -- transfer complete
[66859.257382] Bulk command transfer result=0
[66859.257384] Attempting to get CSW...
[66859.257386] xfer 13 bytes
[66859.257723] Status code 0; transferred 13/13
[66859.257730] -- transfer complete
[66859.257732] Bulk status result = 0
[66859.257735] Bulk Status S 0x53425355 T 0x3fc99 R 0 Stat 0x1
[66859.257740] -- transport indicates command failure
[66859.257744] Issuing auto-REQUEST_SENSE
[66859.257747] Bulk Command S 0x43425355 T 0x3fc9a L 96 F 128 Trg 0 LUN 1 CL 6
[66859.257753] xfer 31 bytes
[66859.257876] Status code 0; transferred 31/31
[66859.257883] -- transfer complete
[66859.257886] Bulk command transfer result=0
[66859.257888] xfer 96 bytes, 1 entries
[66859.258014] Status code -121; transferred 18/96
[66859.258021] -- short read transfer
[66859.258024] Bulk data transfer result 0x1
[66859.258027] Attempting to get CSW...
[66859.258028] xfer 13 bytes
[66859.258208] Status code -32; transferred 0/13
[66859.258212] clearing endpoint halt for pipe 0xc0008380
[66859.258215] rq=01 rqtype=02 value=0000 index=81 len=0
[66859.258603] result = 0
[66859.258609] Attempting to get CSW (2nd try)...
[66859.258611] xfer 13 bytes
[66859.258719] Status code 0; transferred 13/13
[66859.258727] -- transfer complete
[66859.258729] Bulk status result = 0
[66859.258732] Bulk Status S 0x53425355 T 0x3fc9a R 78 Stat 0x0
[66859.258737] -- Result from auto-sense is 0
[66859.258740] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66859.258745] Not Ready: Medium not present
[66859.258749] scsi cmd done, result=0x2
[66859.258756] *** thread sleeping
[66861.239788] *** thread awakened
[66861.239795] Command TEST_UNIT_READY (6 bytes)
[66861.239800] bytes: 00 00 00 00 00 00
[66861.239804] Bulk Command S 0x43425355 T 0x3fc9b L 0 F 0 Trg 0 LUN 2 CL 6
[66861.239811] xfer 31 bytes
[66861.239919] Status code 0; transferred 31/31
[66861.239926] -- transfer complete
[66861.239929] Bulk command transfer result=0
[66861.239931] Attempting to get CSW...
[66861.239933] xfer 13 bytes
[66861.240130] Status code 0; transferred 13/13
[66861.240138] -- transfer complete
[66861.240140] Bulk status result = 0
[66861.240142] Bulk Status S 0x53425355 T 0x3fc9b R 0 Stat 0x1
[66861.240148] -- transport indicates command failure
[66861.240150] Issuing auto-REQUEST_SENSE
[66861.240153] Bulk Command S 0x43425355 T 0x3fc9c L 96 F 128 Trg 0 LUN 2 CL 6
[66861.240159] xfer 31 bytes
[66861.240224] Status code 0; transferred 31/31
[66861.240228] -- transfer complete
[66861.240230] Bulk command transfer result=0
[66861.240232] xfer 96 bytes, 1 entries
[66861.240399] Status code -121; transferred 18/96
[66861.240403] -- short read transfer
[66861.240404] Bulk data transfer result 0x1
[66861.240407] Attempting to get CSW...
[66861.240408] xfer 13 bytes
[66861.240609] Status code -32; transferred 0/13
[66861.240614] clearing endpoint halt for pipe 0xc0008380
[66861.240617] rq=01 rqtype=02 value=0000 index=81 len=0
[66861.241025] result = 0
[66861.241030] Attempting to get CSW (2nd try)...
[66861.241033] xfer 13 bytes
[66861.241156] Status code 0; transferred 13/13
[66861.241164] -- transfer complete
[66861.241166] Bulk status result = 0
[66861.241169] Bulk Status S 0x53425355 T 0x3fc9c R 78 Stat 0x0
[66861.241175] -- Result from auto-sense is 0
[66861.241177] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66861.241182] Not Ready: Medium not present
[66861.241187] scsi cmd done, result=0x2
[66861.241194] *** thread sleeping
[66861.241929] *** thread awakened
[66861.241935] Command TEST_UNIT_READY (6 bytes)
[66861.241939] bytes: 00 00 00 00 00 00
[66861.241944] Bulk Command S 0x43425355 T 0x3fc9d L 0 F 0 Trg 0 LUN 0 CL 6
[66861.241950] xfer 31 bytes
[66861.242071] Status code 0; transferred 31/31
[66861.242078] -- transfer complete
[66861.242080] Bulk command transfer result=0
[66861.242083] Attempting to get CSW...
[66861.242085] xfer 13 bytes
[66861.242158] Status code 0; transferred 13/13
[66861.242161] -- transfer complete
[66861.242163] Bulk status result = 0
[66861.242166] Bulk Status S 0x53425355 T 0x3fc9d R 0 Stat 0x1
[66861.242171] -- transport indicates command failure
[66861.242173] Issuing auto-REQUEST_SENSE
[66861.242176] Bulk Command S 0x43425355 T 0x3fc9e L 96 F 128 Trg 0 LUN 0 CL 6
[66861.242182] xfer 31 bytes
[66861.242242] Status code 0; transferred 31/31
[66861.242245] -- transfer complete
[66861.242247] Bulk command transfer result=0
[66861.242250] xfer 96 bytes, 1 entries
[66861.242389] Status code -121; transferred 18/96
[66861.242393] -- short read transfer
[66861.242395] Bulk data transfer result 0x1
[66861.242397] Attempting to get CSW...
[66861.242399] xfer 13 bytes
[66861.242556] Status code -32; transferred 0/13
[66861.242560] clearing endpoint halt for pipe 0xc0008380
[66861.242579] rq=01 rqtype=02 value=0000 index=81 len=0
[66861.242946] result = 0
[66861.242952] Attempting to get CSW (2nd try)...
[66861.242954] xfer 13 bytes
[66861.242979] Status code 0; transferred 13/13
[66861.242983] -- transfer complete
[66861.242985] Bulk status result = 0
[66861.242987] Bulk Status S 0x53425355 T 0x3fc9e R 78 Stat 0x0
[66861.242993] -- Result from auto-sense is 0
[66861.242995] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66861.243000] Not Ready: Medium not present
[66861.243004] scsi cmd done, result=0x2
[66861.243011] *** thread sleeping
[66861.303774] *** thread awakened
[66861.303780] Command TEST_UNIT_READY (6 bytes)
[66861.303785] bytes: 00 00 00 00 00 00
[66861.303789] Bulk Command S 0x43425355 T 0x3fc9f L 0 F 0 Trg 0 LUN 1 CL 6
[66861.303796] xfer 31 bytes
[66861.303889] Status code 0; transferred 31/31
[66861.303897] -- transfer complete
[66861.303899] Bulk command transfer result=0
[66861.303902] Attempting to get CSW...
[66861.303904] xfer 13 bytes
[66861.304091] Status code 0; transferred 13/13
[66861.304095] -- transfer complete
[66861.304096] Bulk status result = 0
[66861.304099] Bulk Status S 0x53425355 T 0x3fc9f R 0 Stat 0x1
[66861.304104] -- transport indicates command failure
[66861.304106] Issuing auto-REQUEST_SENSE
[66861.304109] Bulk Command S 0x43425355 T 0x3fca0 L 96 F 128 Trg 0 LUN 1 CL 6
[66861.304115] xfer 31 bytes
[66861.304169] Status code 0; transferred 31/31
[66861.304172] -- transfer complete
[66861.304174] Bulk command transfer result=0
[66861.304177] xfer 96 bytes, 1 entries
[66861.304304] Status code -121; transferred 18/96
[66861.304307] -- short read transfer
[66861.304309] Bulk data transfer result 0x1
[66861.304312] Attempting to get CSW...
[66861.304313] xfer 13 bytes
[66861.304473] Status code -32; transferred 0/13
[66861.304476] clearing endpoint halt for pipe 0xc0008380
[66861.304479] rq=01 rqtype=02 value=0000 index=81 len=0
[66861.304866] result = 0
[66861.304872] Attempting to get CSW (2nd try)...
[66861.304874] xfer 13 bytes
[66861.304979] Status code 0; transferred 13/13
[66861.304986] -- transfer complete
[66861.304990] Bulk status result = 0
[66861.304993] Bulk Status S 0x53425355 T 0x3fca0 R 78 Stat 0x0
[66861.304999] -- Result from auto-sense is 0
[66861.305001] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66861.305007] Not Ready: Medium not present
[66861.305011] scsi cmd done, result=0x2
[66861.305020] *** thread sleeping
[66861.306168] *** thread awakened
[66861.306173] Command TEST_UNIT_READY (6 bytes)
[66861.306178] bytes: 00 00 00 00 00 00
[66861.306182] Bulk Command S 0x43425355 T 0x3fca1 L 0 F 0 Trg 0 LUN 3 CL 6
[66861.306189] xfer 31 bytes
[66861.306248] Status code 0; transferred 31/31
[66861.306252] -- transfer complete
[66861.306254] Bulk command transfer result=0
[66861.306256] Attempting to get CSW...
[66861.306258] xfer 13 bytes
[66861.306484] Status code 0; transferred 13/13
[66861.306487] -- transfer complete
[66861.306489] Bulk status result = 0
[66861.306491] Bulk Status S 0x53425355 T 0x3fca1 R 0 Stat 0x1
[66861.306496] -- transport indicates command failure
[66861.306498] Issuing auto-REQUEST_SENSE
[66861.306501] Bulk Command S 0x43425355 T 0x3fca2 L 96 F 128 Trg 0 LUN 3 CL 6
[66861.306506] xfer 31 bytes
[66861.306560] Status code 0; transferred 31/31
[66861.306563] -- transfer complete
[66861.306578] Bulk command transfer result=0
[66861.306581] xfer 96 bytes, 1 entries
[66861.306777] Status code -121; transferred 18/96
[66861.306785] -- short read transfer
[66861.306787] Bulk data transfer result 0x1
[66861.306789] Attempting to get CSW...
[66861.306791] xfer 13 bytes
[66861.306963] Status code -32; transferred 0/13
[66861.306967] clearing endpoint halt for pipe 0xc0008380
[66861.306970] rq=01 rqtype=02 value=0000 index=81 len=0
[66861.307320] result = 0
[66861.307323] Attempting to get CSW (2nd try)...
[66861.307325] xfer 13 bytes
[66861.307355] Status code 0; transferred 13/13
[66861.307358] -- transfer complete
[66861.307360] Bulk status result = 0
[66861.307363] Bulk Status S 0x53425355 T 0x3fca2 R 78 Stat 0x0
[66861.307368] -- Result from auto-sense is 0
[66861.307371] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66861.307376] Not Ready: Medium not present
[66861.307382] scsi cmd done, result=0x2
[66861.307388] *** thread sleeping
[66863.287658] *** thread awakened
[66863.287664] Command TEST_UNIT_READY (6 bytes)
[66863.287669] bytes: 00 00 00 00 00 00
[66863.287673] Bulk Command S 0x43425355 T 0x3fca3 L 0 F 0 Trg 0 LUN 0 CL 6
[66863.287680] xfer 31 bytes
[66863.287808] Status code 0; transferred 31/31
[66863.287815] -- transfer complete
[66863.287817] Bulk command transfer result=0
[66863.287820] Attempting to get CSW...
[66863.287822] xfer 13 bytes
[66863.287895] Status code 0; transferred 13/13
[66863.287898] -- transfer complete
[66863.287900] Bulk status result = 0
[66863.287902] Bulk Status S 0x53425355 T 0x3fca3 R 0 Stat 0x1
[66863.287908] -- transport indicates command failure
[66863.287910] Issuing auto-REQUEST_SENSE
[66863.287913] Bulk Command S 0x43425355 T 0x3fca4 L 96 F 128 Trg 0 LUN 0 CL 6
[66863.287919] xfer 31 bytes
[66863.287989] Status code 0; transferred 31/31
[66863.287992] -- transfer complete
[66863.287994] Bulk command transfer result=0
[66863.287997] xfer 96 bytes, 1 entries
[66863.288127] Status code -121; transferred 18/96
[66863.288131] -- short read transfer
[66863.288132] Bulk data transfer result 0x1
[66863.288135] Attempting to get CSW...
[66863.288137] xfer 13 bytes
[66863.288302] Status code -32; transferred 0/13
[66863.288306] clearing endpoint halt for pipe 0xc0008380
[66863.288308] rq=01 rqtype=02 value=0000 index=81 len=0
[66863.288689] result = 0
[66863.288698] Attempting to get CSW (2nd try)...
[66863.288700] xfer 13 bytes
[66863.288805] Status code 0; transferred 13/13
[66863.288812] -- transfer complete
[66863.288816] Bulk status result = 0
[66863.288819] Bulk Status S 0x53425355 T 0x3fca4 R 78 Stat 0x0
[66863.288825] -- Result from auto-sense is 0
[66863.288827] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66863.288833] Not Ready: Medium not present
[66863.288837] scsi cmd done, result=0x2
[66863.288845] *** thread sleeping
[66863.288896] *** thread awakened
[66863.288901] Command TEST_UNIT_READY (6 bytes)
[66863.288905] bytes: 00 00 00 00 00 00
[66863.288909] Bulk Command S 0x43425355 T 0x3fca5 L 0 F 0 Trg 0 LUN 2 CL 6
[66863.288915] xfer 31 bytes
[66863.289018] Status code 0; transferred 31/31
[66863.289026] -- transfer complete
[66863.289030] Bulk command transfer result=0
[66863.289033] Attempting to get CSW...
[66863.289035] xfer 13 bytes
[66863.289242] Status code 0; transferred 13/13
[66863.289249] -- transfer complete
[66863.289251] Bulk status result = 0
[66863.289254] Bulk Status S 0x53425355 T 0x3fca5 R 0 Stat 0x1
[66863.289259] -- transport indicates command failure
[66863.289261] Issuing auto-REQUEST_SENSE
[66863.289264] Bulk Command S 0x43425355 T 0x3fca6 L 96 F 128 Trg 0 LUN 2 CL 6
[66863.289270] xfer 31 bytes
[66863.289373] Status code 0; transferred 31/31
[66863.289380] -- transfer complete
[66863.289383] Bulk command transfer result=0
[66863.289386] xfer 96 bytes, 1 entries
[66863.289536] Status code -121; transferred 18/96
[66863.289543] -- short read transfer
[66863.289546] Bulk data transfer result 0x1
[66863.289548] Attempting to get CSW...
[66863.289550] xfer 13 bytes
[66863.289689] Status code -32; transferred 0/13
[66863.289693] clearing endpoint halt for pipe 0xc0008380
[66863.289696] rq=01 rqtype=02 value=0000 index=81 len=0
[66863.290086] result = 0
[66863.290092] Attempting to get CSW (2nd try)...
[66863.290096] xfer 13 bytes
[66863.290184] Status code 0; transferred 13/13
[66863.290191] -- transfer complete
[66863.290194] Bulk status result = 0
[66863.290196] Bulk Status S 0x53425355 T 0x3fca6 R 78 Stat 0x0
[66863.290202] -- Result from auto-sense is 0
[66863.290205] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66863.290210] Not Ready: Medium not present
[66863.290214] scsi cmd done, result=0x2
[66863.290221] *** thread sleeping
[66863.351846] *** thread awakened
[66863.351853] Command TEST_UNIT_READY (6 bytes)
[66863.351858] bytes: 00 00 00 00 00 00
[66863.351862] Bulk Command S 0x43425355 T 0x3fca7 L 0 F 0 Trg 0 LUN 1 CL 6
[66863.351869] xfer 31 bytes
[66863.351950] Status code 0; transferred 31/31
[66863.351954] -- transfer complete
[66863.351956] Bulk command transfer result=0
[66863.351959] Attempting to get CSW...
[66863.351960] xfer 13 bytes
[66863.352325] Status code 0; transferred 13/13
[66863.352328] -- transfer complete
[66863.352330] Bulk status result = 0
[66863.352332] Bulk Status S 0x53425355 T 0x3fca7 R 0 Stat 0x1
[66863.352337] -- transport indicates command failure
[66863.352339] Issuing auto-REQUEST_SENSE
[66863.352341] Bulk Command S 0x43425355 T 0x3fca8 L 96 F 128 Trg 0 LUN 1 CL 6
[66863.352347] xfer 31 bytes
[66863.352407] Status code 0; transferred 31/31
[66863.352410] -- transfer complete
[66863.352412] Bulk command transfer result=0
[66863.352414] xfer 96 bytes, 1 entries
[66863.352542] Status code -121; transferred 18/96
[66863.352545] -- short read transfer
[66863.352547] Bulk data transfer result 0x1
[66863.352550] Attempting to get CSW...
[66863.352551] xfer 13 bytes
[66863.352753] Status code -32; transferred 0/13
[66863.352760] clearing endpoint halt for pipe 0xc0008380
[66863.352763] rq=01 rqtype=02 value=0000 index=81 len=0
[66863.353165] result = 0
[66863.353171] Attempting to get CSW (2nd try)...
[66863.353174] xfer 13 bytes
[66863.353289] Status code 0; transferred 13/13
[66863.353296] -- transfer complete
[66863.353299] Bulk status result = 0
[66863.353301] Bulk Status S 0x53425355 T 0x3fca8 R 78 Stat 0x0
[66863.353307] -- Result from auto-sense is 0
[66863.353310] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66863.353315] Not Ready: Medium not present
[66863.353319] scsi cmd done, result=0x2
[66863.353327] *** thread sleeping
[66863.353377] *** thread awakened
[66863.353380] Command TEST_UNIT_READY (6 bytes)
[66863.353383] bytes: 00 00 00 00 00 00
[66863.353387] Bulk Command S 0x43425355 T 0x3fca9 L 0 F 0 Trg 0 LUN 3 CL 6
[66863.353394] xfer 31 bytes
[66863.353519] Status code 0; transferred 31/31
[66863.353526] -- transfer complete
[66863.353528] Bulk command transfer result=0
[66863.353531] Attempting to get CSW...
[66863.353533] xfer 13 bytes
[66863.353741] Status code 0; transferred 13/13
[66863.353749] -- transfer complete
[66863.353751] Bulk status result = 0
[66863.353754] Bulk Status S 0x53425355 T 0x3fca9 R 0 Stat 0x1
[66863.353759] -- transport indicates command failure
[66863.353762] Issuing auto-REQUEST_SENSE
[66863.353764] Bulk Command S 0x43425355 T 0x3fcaa L 96 F 128 Trg 0 LUN 3 CL 6
[66863.353770] xfer 31 bytes
[66863.353894] Status code 0; transferred 31/31
[66863.353900] -- transfer complete
[66863.353903] Bulk command transfer result=0
[66863.353905] xfer 96 bytes, 1 entries
[66863.354031] Status code -121; transferred 18/96
[66863.354039] -- short read transfer
[66863.354041] Bulk data transfer result 0x1
[66863.354044] Attempting to get CSW...
[66863.354046] xfer 13 bytes
[66863.354218] Status code -32; transferred 0/13
[66863.354222] clearing endpoint halt for pipe 0xc0008380
[66863.354225] rq=01 rqtype=02 value=0000 index=81 len=0
[66863.354592] result = 0
[66863.354598] Attempting to get CSW (2nd try)...
[66863.354601] xfer 13 bytes
[66863.354710] Status code 0; transferred 13/13
[66863.354717] -- transfer complete
[66863.354719] Bulk status result = 0
[66863.354722] Bulk Status S 0x53425355 T 0x3fcaa R 78 Stat 0x0
[66863.354728] -- Result from auto-sense is 0
[66863.354730] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66863.354736] Not Ready: Medium not present
[66863.354740] scsi cmd done, result=0x2
[66863.354747] *** thread sleeping
[66865.335671] *** thread awakened
[66865.335678] Command TEST_UNIT_READY (6 bytes)
[66865.335683] bytes: 00 00 00 00 00 00
[66865.335687] Bulk Command S 0x43425355 T 0x3fcab L 0 F 0 Trg 0 LUN 2 CL 6
[66865.335694] xfer 31 bytes
[66865.335776] Status code 0; transferred 31/31
[66865.335780] -- transfer complete
[66865.335782] Bulk command transfer result=0
[66865.335784] Attempting to get CSW...
[66865.335786] xfer 13 bytes
[66865.336007] Status code 0; transferred 13/13
[66865.336010] -- transfer complete
[66865.336012] Bulk status result = 0
[66865.336014] Bulk Status S 0x53425355 T 0x3fcab R 0 Stat 0x1
[66865.336019] -- transport indicates command failure
[66865.336021] Issuing auto-REQUEST_SENSE
[66865.336023] Bulk Command S 0x43425355 T 0x3fcac L 96 F 128 Trg 0 LUN 2 CL 6
[66865.336029] xfer 31 bytes
[66865.336106] Status code 0; transferred 31/31
[66865.336110] -- transfer complete
[66865.336112] Bulk command transfer result=0
[66865.336114] xfer 96 bytes, 1 entries
[66865.336252] Status code -121; transferred 18/96
[66865.336255] -- short read transfer
[66865.336257] Bulk data transfer result 0x1
[66865.336260] Attempting to get CSW...
[66865.336261] xfer 13 bytes
[66865.336430] Status code -32; transferred 0/13
[66865.336434] clearing endpoint halt for pipe 0xc0008380
[66865.336437] rq=01 rqtype=02 value=0000 index=81 len=0
[66865.336841] result = 0
[66865.336847] Attempting to get CSW (2nd try)...
[66865.336849] xfer 13 bytes
[66865.336972] Status code 0; transferred 13/13
[66865.336979] -- transfer complete
[66865.336982] Bulk status result = 0
[66865.336984] Bulk Status S 0x53425355 T 0x3fcac R 78 Stat 0x0
[66865.336990] -- Result from auto-sense is 0
[66865.336993] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66865.336999] Not Ready: Medium not present
[66865.337003] scsi cmd done, result=0x2
[66865.337011] *** thread sleeping
[66865.337922] *** thread awakened
[66865.337928] Command TEST_UNIT_READY (6 bytes)
[66865.337932] bytes: 00 00 00 00 00 00
[66865.337936] Bulk Command S 0x43425355 T 0x3fcad L 0 F 0 Trg 0 LUN 0 CL 6
[66865.337943] xfer 31 bytes
[66865.338017] Status code 0; transferred 31/31
[66865.338021] -- transfer complete
[66865.338023] Bulk command transfer result=0
[66865.338025] Attempting to get CSW...
[66865.338027] xfer 13 bytes
[66865.338145] Status code 0; transferred 13/13
[66865.338149] -- transfer complete
[66865.338150] Bulk status result = 0
[66865.338153] Bulk Status S 0x53425355 T 0x3fcad R 0 Stat 0x1
[66865.338157] -- transport indicates command failure
[66865.338159] Issuing auto-REQUEST_SENSE
[66865.338162] Bulk Command S 0x43425355 T 0x3fcae L 96 F 128 Trg 0 LUN 0 CL 6
[66865.338167] xfer 31 bytes
[66865.338241] Status code 0; transferred 31/31
[66865.338244] -- transfer complete
[66865.338246] Bulk command transfer result=0
[66865.338248] xfer 96 bytes, 1 entries
[66865.338377] Status code -121; transferred 18/96
[66865.338381] -- short read transfer
[66865.338383] Bulk data transfer result 0x1
[66865.338385] Attempting to get CSW...
[66865.338387] xfer 13 bytes
[66865.338559] Status code -32; transferred 0/13
[66865.338579] clearing endpoint halt for pipe 0xc0008380
[66865.338582] rq=01 rqtype=02 value=0000 index=81 len=0
[66865.338989] result = 0
[66865.338994] Attempting to get CSW (2nd try)...
[66865.338997] xfer 13 bytes
[66865.339061] Status code 0; transferred 13/13
[66865.339066] -- transfer complete
[66865.339068] Bulk status result = 0
[66865.339070] Bulk Status S 0x53425355 T 0x3fcae R 78 Stat 0x0
[66865.339076] -- Result from auto-sense is 0
[66865.339078] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66865.339084] Not Ready: Medium not present
[66865.339088] scsi cmd done, result=0x2
[66865.339094] *** thread sleeping
[66865.399778] *** thread awakened
[66865.399785] Command TEST_UNIT_READY (6 bytes)
[66865.399789] bytes: 00 00 00 00 00 00
[66865.399794] Bulk Command S 0x43425355 T 0x3fcaf L 0 F 0 Trg 0 LUN 1 CL 6
[66865.399801] xfer 31 bytes
[66865.399893] Status code 0; transferred 31/31
[66865.399901] -- transfer complete
[66865.399903] Bulk command transfer result=0
[66865.399906] Attempting to get CSW...
[66865.399908] xfer 13 bytes
[66865.400217] Status code 0; transferred 13/13
[66865.400220] -- transfer complete
[66865.400222] Bulk status result = 0
[66865.400225] Bulk Status S 0x53425355 T 0x3fcaf R 0 Stat 0x1
[66865.400230] -- transport indicates command failure
[66865.400232] Issuing auto-REQUEST_SENSE
[66865.400235] Bulk Command S 0x43425355 T 0x3fcb0 L 96 F 128 Trg 0 LUN 1 CL 6
[66865.400241] xfer 31 bytes
[66865.400305] Status code 0; transferred 31/31
[66865.400308] -- transfer complete
[66865.400310] Bulk command transfer result=0
[66865.400313] xfer 96 bytes, 1 entries
[66865.400441] Status code -121; transferred 18/96
[66865.400445] -- short read transfer
[66865.400447] Bulk data transfer result 0x1
[66865.400449] Attempting to get CSW...
[66865.400451] xfer 13 bytes
[66865.400656] Status code -32; transferred 0/13
[66865.400663] clearing endpoint halt for pipe 0xc0008380
[66865.400667] rq=01 rqtype=02 value=0000 index=81 len=0
[66865.401075] result = 0
[66865.401081] Attempting to get CSW (2nd try)...
[66865.401083] xfer 13 bytes
[66865.401190] Status code 0; transferred 13/13
[66865.401197] -- transfer complete
[66865.401199] Bulk status result = 0
[66865.401202] Bulk Status S 0x53425355 T 0x3fcb0 R 78 Stat 0x0
[66865.401208] -- Result from auto-sense is 0
[66865.401210] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66865.401216] Not Ready: Medium not present
[66865.401220] scsi cmd done, result=0x2
[66865.401230] *** thread sleeping
[66865.401321] *** thread awakened
[66865.401326] Command TEST_UNIT_READY (6 bytes)
[66865.401331] bytes: 00 00 00 00 00 00
[66865.401335] Bulk Command S 0x43425355 T 0x3fcb1 L 0 F 0 Trg 0 LUN 3 CL 6
[66865.401343] xfer 31 bytes
[66865.401447] Status code 0; transferred 31/31
[66865.401454] -- transfer complete
[66865.401457] Bulk command transfer result=0
[66865.401459] Attempting to get CSW...
[66865.401461] xfer 13 bytes
[66865.401702] Status code 0; transferred 13/13
[66865.401710] -- transfer complete
[66865.401713] Bulk status result = 0
[66865.401715] Bulk Status S 0x53425355 T 0x3fcb1 R 0 Stat 0x1
[66865.401721] -- transport indicates command failure
[66865.401723] Issuing auto-REQUEST_SENSE
[66865.401725] Bulk Command S 0x43425355 T 0x3fcb2 L 96 F 128 Trg 0 LUN 3 CL 6
[66865.401732] xfer 31 bytes
[66865.401839] Status code 0; transferred 31/31
[66865.401845] -- transfer complete
[66865.401848] Bulk command transfer result=0
[66865.401851] xfer 96 bytes, 1 entries
[66865.401979] Status code -121; transferred 18/96
[66865.401986] -- short read transfer
[66865.401989] Bulk data transfer result 0x1
[66865.401991] Attempting to get CSW...
[66865.401993] xfer 13 bytes
[66865.402144] Status code -32; transferred 0/13
[66865.402148] clearing endpoint halt for pipe 0xc0008380
[66865.402151] rq=01 rqtype=02 value=0000 index=81 len=0
[66865.402521] result = 0
[66865.402527] Attempting to get CSW (2nd try)...
[66865.402530] xfer 13 bytes
[66865.402637] Status code 0; transferred 13/13
[66865.402644] -- transfer complete
[66865.402647] Bulk status result = 0
[66865.402649] Bulk Status S 0x53425355 T 0x3fcb2 R 78 Stat 0x0
[66865.402655] -- Result from auto-sense is 0
[66865.402658] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66865.402664] Not Ready: Medium not present
[66865.402668] scsi cmd done, result=0x2
[66865.402676] *** thread sleeping
[66867.383709] *** thread awakened
[66867.383716] Command TEST_UNIT_READY (6 bytes)
[66867.383721] bytes: 00 00 00 00 00 00
[66867.383726] Bulk Command S 0x43425355 T 0x3fcb3 L 0 F 0 Trg 0 LUN 0 CL 6
[66867.383732] xfer 31 bytes
[66867.383866] Status code 0; transferred 31/31
[66867.383873] -- transfer complete
[66867.383876] Bulk command transfer result=0
[66867.383878] Attempting to get CSW...
[66867.383880] xfer 13 bytes
[66867.383953] Status code 0; transferred 13/13
[66867.383957] -- transfer complete
[66867.383959] Bulk status result = 0
[66867.383961] Bulk Status S 0x53425355 T 0x3fcb3 R 0 Stat 0x1
[66867.383966] -- transport indicates command failure
[66867.383968] Issuing auto-REQUEST_SENSE
[66867.383971] Bulk Command S 0x43425355 T 0x3fcb4 L 96 F 128 Trg 0 LUN 0 CL 6
[66867.383977] xfer 31 bytes
[66867.384050] Status code 0; transferred 31/31
[66867.384053] -- transfer complete
[66867.384055] Bulk command transfer result=0
[66867.384058] xfer 96 bytes, 1 entries
[66867.384195] Status code -121; transferred 18/96
[66867.384199] -- short read transfer
[66867.384201] Bulk data transfer result 0x1
[66867.384203] Attempting to get CSW...
[66867.384205] xfer 13 bytes
[66867.384383] Status code -32; transferred 0/13
[66867.384386] clearing endpoint halt for pipe 0xc0008380
[66867.384389] rq=01 rqtype=02 value=0000 index=81 len=0
[66867.384772] result = 0
[66867.384778] Attempting to get CSW (2nd try)...
[66867.384781] xfer 13 bytes
[66867.384901] Status code 0; transferred 13/13
[66867.384908] -- transfer complete
[66867.384911] Bulk status result = 0
[66867.384913] Bulk Status S 0x53425355 T 0x3fcb4 R 78 Stat 0x0
[66867.384919] -- Result from auto-sense is 0
[66867.384922] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66867.384927] Not Ready: Medium not present
[66867.384932] scsi cmd done, result=0x2
[66867.384939] *** thread sleeping
[66867.384989] *** thread awakened
[66867.384993] Command TEST_UNIT_READY (6 bytes)
[66867.384996] bytes: 00 00 00 00 00 00
[66867.385000] Bulk Command S 0x43425355 T 0x3fcb5 L 0 F 0 Trg 0 LUN 2 CL 6
[66867.385006] xfer 31 bytes
[66867.385129] Status code 0; transferred 31/31
[66867.385136] -- transfer complete
[66867.385139] Bulk command transfer result=0
[66867.385142] Attempting to get CSW...
[66867.385144] xfer 13 bytes
[66867.385325] Status code 0; transferred 13/13
[66867.385332] -- transfer complete
[66867.385334] Bulk status result = 0
[66867.385337] Bulk Status S 0x53425355 T 0x3fcb5 R 0 Stat 0x1
[66867.385342] -- transport indicates command failure
[66867.385344] Issuing auto-REQUEST_SENSE
[66867.385347] Bulk Command S 0x43425355 T 0x3fcb6 L 96 F 128 Trg 0 LUN 2 CL 6
[66867.385353] xfer 31 bytes
[66867.385477] Status code 0; transferred 31/31
[66867.385484] -- transfer complete
[66867.385486] Bulk command transfer result=0
[66867.385489] xfer 96 bytes, 1 entries
[66867.385640] Status code -121; transferred 18/96
[66867.385647] -- short read transfer
[66867.385650] Bulk data transfer result 0x1
[66867.385653] Attempting to get CSW...
[66867.385655] xfer 13 bytes
[66867.385815] Status code -32; transferred 0/13
[66867.385819] clearing endpoint halt for pipe 0xc0008380
[66867.385822] rq=01 rqtype=02 value=0000 index=81 len=0
[66867.386176] result = 0
[66867.386179] Attempting to get CSW (2nd try)...
[66867.386181] xfer 13 bytes
[66867.386235] Status code 0; transferred 13/13
[66867.386239] -- transfer complete
[66867.386241] Bulk status result = 0
[66867.386243] Bulk Status S 0x53425355 T 0x3fcb6 R 78 Stat 0x0
[66867.386249] -- Result from auto-sense is 0
[66867.386251] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66867.386256] Not Ready: Medium not present
[66867.386260] scsi cmd done, result=0x2
[66867.386267] *** thread sleeping
[66867.447777] *** thread awakened
[66867.447784] Command TEST_UNIT_READY (6 bytes)
[66867.447789] bytes: 00 00 00 00 00 00
[66867.447793] Bulk Command S 0x43425355 T 0x3fcb7 L 0 F 0 Trg 0 LUN 3 CL 6
[66867.447800] xfer 31 bytes
[66867.447929] Status code 0; transferred 31/31
[66867.447936] -- transfer complete
[66867.447939] Bulk command transfer result=0
[66867.447941] Attempting to get CSW...
[66867.447943] xfer 13 bytes
[66867.448017] Status code 0; transferred 13/13
[66867.448020] -- transfer complete
[66867.448022] Bulk status result = 0
[66867.448025] Bulk Status S 0x53425355 T 0x3fcb7 R 0 Stat 0x1
[66867.448030] -- transport indicates command failure
[66867.448032] Issuing auto-REQUEST_SENSE
[66867.448035] Bulk Command S 0x43425355 T 0x3fcb8 L 96 F 128 Trg 0 LUN 3 CL 6
[66867.448041] xfer 31 bytes
[66867.448115] Status code 0; transferred 31/31
[66867.448119] -- transfer complete
[66867.448120] Bulk command transfer result=0
[66867.448123] xfer 96 bytes, 1 entries
[66867.448252] Status code -121; transferred 18/96
[66867.448256] -- short read transfer
[66867.448258] Bulk data transfer result 0x1
[66867.448260] Attempting to get CSW...
[66867.448262] xfer 13 bytes
[66867.448438] Status code -32; transferred 0/13
[66867.448442] clearing endpoint halt for pipe 0xc0008380
[66867.448445] rq=01 rqtype=02 value=0000 index=81 len=0
[66867.448851] result = 0
[66867.448857] Attempting to get CSW (2nd try)...
[66867.448859] xfer 13 bytes
[66867.448983] Status code 0; transferred 13/13
[66867.448990] -- transfer complete
[66867.448992] Bulk status result = 0
[66867.448995] Bulk Status S 0x53425355 T 0x3fcb8 R 78 Stat 0x0
[66867.449003] -- Result from auto-sense is 0
[66867.449006] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66867.449011] Not Ready: Medium not present
[66867.449016] scsi cmd done, result=0x2
[66867.449023] *** thread sleeping
[66867.449146] *** thread awakened
[66867.449152] Command TEST_UNIT_READY (6 bytes)
[66867.449156] bytes: 00 00 00 00 00 00
[66867.449160] Bulk Command S 0x43425355 T 0x3fcb9 L 0 F 0 Trg 0 LUN 1 CL 6
[66867.449167] xfer 31 bytes
[66867.449294] Status code 0; transferred 31/31
[66867.449301] -- transfer complete
[66867.449303] Bulk command transfer result=0
[66867.449306] Attempting to get CSW...
[66867.449308] xfer 13 bytes
[66867.449639] Status code 0; transferred 13/13
[66867.449646] -- transfer complete
[66867.449649] Bulk status result = 0
[66867.449652] Bulk Status S 0x53425355 T 0x3fcb9 R 0 Stat 0x1
[66867.449657] -- transport indicates command failure
[66867.449659] Issuing auto-REQUEST_SENSE
[66867.449662] Bulk Command S 0x43425355 T 0x3fcba L 96 F 128 Trg 0 LUN 1 CL 6
[66867.449668] xfer 31 bytes
[66867.449792] Status code 0; transferred 31/31
[66867.449799] -- transfer complete
[66867.449801] Bulk command transfer result=0
[66867.449804] xfer 96 bytes, 1 entries
[66867.449928] Status code -121; transferred 18/96
[66867.449935] -- short read transfer
[66867.449938] Bulk data transfer result 0x1
[66867.449940] Attempting to get CSW...
[66867.449942] xfer 13 bytes
[66867.450146] Status code -32; transferred 0/13
[66867.450153] clearing endpoint halt for pipe 0xc0008380
[66867.450157] rq=01 rqtype=02 value=0000 index=81 len=0
[66867.450535] result = 0
[66867.450538] Attempting to get CSW (2nd try)...
[66867.450540] xfer 13 bytes
[66867.450649] Status code 0; transferred 13/13
[66867.450656] -- transfer complete
[66867.450659] Bulk status result = 0
[66867.450662] Bulk Status S 0x53425355 T 0x3fcba R 78 Stat 0x0
[66867.450667] -- Result from auto-sense is 0
[66867.450670] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66867.450675] Not Ready: Medium not present
[66867.450679] scsi cmd done, result=0x2
[66867.450687] *** thread sleeping
[66869.431715] *** thread awakened
[66869.431722] Command TEST_UNIT_READY (6 bytes)
[66869.431727] bytes: 00 00 00 00 00 00
[66869.431731] Bulk Command S 0x43425355 T 0x3fcbb L 0 F 0 Trg 0 LUN 2 CL 6
[66869.431738] xfer 31 bytes
[66869.431848] Status code 0; transferred 31/31
[66869.431855] -- transfer complete
[66869.431858] Bulk command transfer result=0
[66869.431860] Attempting to get CSW...
[66869.431862] xfer 13 bytes
[66869.432032] Status code 0; transferred 13/13
[66869.432036] -- transfer complete
[66869.432038] Bulk status result = 0
[66869.432040] Bulk Status S 0x53425355 T 0x3fcbb R 0 Stat 0x1
[66869.432045] -- transport indicates command failure
[66869.432048] Issuing auto-REQUEST_SENSE
[66869.432050] Bulk Command S 0x43425355 T 0x3fcbc L 96 F 128 Trg 0 LUN 2 CL 6
[66869.432056] xfer 31 bytes
[66869.432116] Status code 0; transferred 31/31
[66869.432120] -- transfer complete
[66869.432122] Bulk command transfer result=0
[66869.432124] xfer 96 bytes, 1 entries
[66869.432295] Status code -121; transferred 18/96
[66869.432298] -- short read transfer
[66869.432300] Bulk data transfer result 0x1
[66869.432302] Attempting to get CSW...
[66869.432304] xfer 13 bytes
[66869.432472] Status code -32; transferred 0/13
[66869.432476] clearing endpoint halt for pipe 0xc0008380
[66869.432478] rq=01 rqtype=02 value=0000 index=81 len=0
[66869.432888] result = 0
[66869.432894] Attempting to get CSW (2nd try)...
[66869.432897] xfer 13 bytes
[66869.433028] Status code 0; transferred 13/13
[66869.433036] -- transfer complete
[66869.433038] Bulk status result = 0
[66869.433041] Bulk Status S 0x53425355 T 0x3fcbc R 78 Stat 0x0
[66869.433047] -- Result from auto-sense is 0
[66869.433049] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66869.433055] Not Ready: Medium not present
[66869.433060] scsi cmd done, result=0x2
[66869.433067] *** thread sleeping
[66869.433120] *** thread awakened
[66869.433123] Command TEST_UNIT_READY (6 bytes)
[66869.433126] bytes: 00 00 00 00 00 00
[66869.433130] Bulk Command S 0x43425355 T 0x3fcbd L 0 F 0 Trg 0 LUN 0 CL 6
[66869.433136] xfer 31 bytes
[66869.433260] Status code 0; transferred 31/31
[66869.433267] -- transfer complete
[66869.433269] Bulk command transfer result=0
[66869.433272] Attempting to get CSW...
[66869.433274] xfer 13 bytes
[66869.433386] Status code 0; transferred 13/13
[66869.433393] -- transfer complete
[66869.433395] Bulk status result = 0
[66869.433398] Bulk Status S 0x53425355 T 0x3fcbd R 0 Stat 0x1
[66869.433403] -- transport indicates command failure
[66869.433405] Issuing auto-REQUEST_SENSE
[66869.433408] Bulk Command S 0x43425355 T 0x3fcbe L 96 F 128 Trg 0 LUN 0 CL 6
[66869.433414] xfer 31 bytes
[66869.433517] Status code 0; transferred 31/31
[66869.433524] -- transfer complete
[66869.433527] Bulk command transfer result=0
[66869.433530] xfer 96 bytes, 1 entries
[66869.433619] Status code -121; transferred 18/96
[66869.433623] -- short read transfer
[66869.433625] Bulk data transfer result 0x1
[66869.433627] Attempting to get CSW...
[66869.433629] xfer 13 bytes
[66869.433766] Status code -32; transferred 0/13
[66869.433770] clearing endpoint halt for pipe 0xc0008380
[66869.433773] rq=01 rqtype=02 value=0000 index=81 len=0
[66869.434101] result = 0
[66869.434103] Attempting to get CSW (2nd try)...
[66869.434105] xfer 13 bytes
[66869.434193] Status code 0; transferred 13/13
[66869.434199] -- transfer complete
[66869.434202] Bulk status result = 0
[66869.434205] Bulk Status S 0x53425355 T 0x3fcbe R 78 Stat 0x0
[66869.434210] -- Result from auto-sense is 0
[66869.434213] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66869.434218] Not Ready: Medium not present
[66869.434222] scsi cmd done, result=0x2
[66869.434229] *** thread sleeping
[66869.495767] *** thread awakened
[66869.495773] Command TEST_UNIT_READY (6 bytes)
[66869.495778] bytes: 00 00 00 00 00 00
[66869.495783] Bulk Command S 0x43425355 T 0x3fcbf L 0 F 0 Trg 0 LUN 3 CL 6
[66869.495789] xfer 31 bytes
[66869.495862] Status code 0; transferred 31/31
[66869.495866] -- transfer complete
[66869.495868] Bulk command transfer result=0
[66869.495870] Attempting to get CSW...
[66869.495872] xfer 13 bytes
[66869.496119] Status code 0; transferred 13/13
[66869.496123] -- transfer complete
[66869.496124] Bulk status result = 0
[66869.496127] Bulk Status S 0x53425355 T 0x3fcbf R 0 Stat 0x1
[66869.496132] -- transport indicates command failure
[66869.496134] Issuing auto-REQUEST_SENSE
[66869.496136] Bulk Command S 0x43425355 T 0x3fcc0 L 96 F 128 Trg 0 LUN 3 CL 6
[66869.496142] xfer 31 bytes
[66869.496202] Status code 0; transferred 31/31
[66869.496205] -- transfer complete
[66869.496207] Bulk command transfer result=0
[66869.496209] xfer 96 bytes, 1 entries
[66869.496356] Status code -121; transferred 18/96
[66869.496360] -- short read transfer
[66869.496362] Bulk data transfer result 0x1
[66869.496364] Attempting to get CSW...
[66869.496366] xfer 13 bytes
[66869.496530] Status code -32; transferred 0/13
[66869.496533] clearing endpoint halt for pipe 0xc0008380
[66869.496536] rq=01 rqtype=02 value=0000 index=81 len=0
[66869.496920] result = 0
[66869.496926] Attempting to get CSW (2nd try)...
[66869.496928] xfer 13 bytes
[66869.497051] Status code 0; transferred 13/13
[66869.497058] -- transfer complete
[66869.497060] Bulk status result = 0
[66869.497064] Bulk Status S 0x53425355 T 0x3fcc0 R 78 Stat 0x0
[66869.497070] -- Result from auto-sense is 0
[66869.497073] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66869.497078] Not Ready: Medium not present
[66869.497082] scsi cmd done, result=0x2
[66869.497090] *** thread sleeping
[66869.497208] *** thread awakened
[66869.497214] Command TEST_UNIT_READY (6 bytes)
[66869.497218] bytes: 00 00 00 00 00 00
[66869.497222] Bulk Command S 0x43425355 T 0x3fcc1 L 0 F 0 Trg 0 LUN 1 CL 6
[66869.497229] xfer 31 bytes
[66869.497333] Status code 0; transferred 31/31
[66869.497341] -- transfer complete
[66869.497344] Bulk command transfer result=0
[66869.497346] Attempting to get CSW...
[66869.497348] xfer 13 bytes
[66869.497702] Status code 0; transferred 13/13
[66869.497709] -- transfer complete
[66869.497712] Bulk status result = 0
[66869.497714] Bulk Status S 0x53425355 T 0x3fcc1 R 0 Stat 0x1
[66869.497720] -- transport indicates command failure
[66869.497722] Issuing auto-REQUEST_SENSE
[66869.497724] Bulk Command S 0x43425355 T 0x3fcc2 L 96 F 128 Trg 0 LUN 1 CL 6
[66869.497731] xfer 31 bytes
[66869.497836] Status code 0; transferred 31/31
[66869.497843] -- transfer complete
[66869.497846] Bulk command transfer result=0
[66869.497848] xfer 96 bytes, 1 entries
[66869.497977] Status code -121; transferred 18/96
[66869.497984] -- short read transfer
[66869.497986] Bulk data transfer result 0x1
[66869.497989] Attempting to get CSW...
[66869.497991] xfer 13 bytes
[66869.498142] Status code -32; transferred 0/13
[66869.498146] clearing endpoint halt for pipe 0xc0008380
[66869.498149] rq=01 rqtype=02 value=0000 index=81 len=0
[66869.498542] result = 0
[66869.498548] Attempting to get CSW (2nd try)...
[66869.498550] xfer 13 bytes
[66869.498657] Status code 0; transferred 13/13
[66869.498664] -- transfer complete
[66869.498666] Bulk status result = 0
[66869.498669] Bulk Status S 0x53425355 T 0x3fcc2 R 78 Stat 0x0
[66869.498675] -- Result from auto-sense is 0
[66869.498677] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66869.498683] Not Ready: Medium not present
[66869.498687] scsi cmd done, result=0x2
[66869.498694] *** thread sleeping
[66871.479710] *** thread awakened
[66871.479717] Command TEST_UNIT_READY (6 bytes)
[66871.479721] bytes: 00 00 00 00 00 00
[66871.479726] Bulk Command S 0x43425355 T 0x3fcc3 L 0 F 0 Trg 0 LUN 0 CL 6
[66871.479732] xfer 31 bytes
[66871.479859] Status code 0; transferred 31/31
[66871.479866] -- transfer complete
[66871.479868] Bulk command transfer result=0
[66871.479871] Attempting to get CSW...
[66871.479873] xfer 13 bytes
[66871.479946] Status code 0; transferred 13/13
[66871.479949] -- transfer complete
[66871.479951] Bulk status result = 0
[66871.479954] Bulk Status S 0x53425355 T 0x3fcc3 R 0 Stat 0x1
[66871.479959] -- transport indicates command failure
[66871.479961] Issuing auto-REQUEST_SENSE
[66871.479964] Bulk Command S 0x43425355 T 0x3fcc4 L 96 F 128 Trg 0 LUN 0 CL 6
[66871.479970] xfer 31 bytes
[66871.480040] Status code 0; transferred 31/31
[66871.480044] -- transfer complete
[66871.480046] Bulk command transfer result=0
[66871.480048] xfer 96 bytes, 1 entries
[66871.480185] Status code -121; transferred 18/96
[66871.480189] -- short read transfer
[66871.480191] Bulk data transfer result 0x1
[66871.480193] Attempting to get CSW...
[66871.480195] xfer 13 bytes
[66871.480369] Status code -32; transferred 0/13
[66871.480373] clearing endpoint halt for pipe 0xc0008380
[66871.480376] rq=01 rqtype=02 value=0000 index=81 len=0
[66871.480764] result = 0
[66871.480770] Attempting to get CSW (2nd try)...
[66871.480772] xfer 13 bytes
[66871.480900] Status code 0; transferred 13/13
[66871.480907] -- transfer complete
[66871.480910] Bulk status result = 0
[66871.480912] Bulk Status S 0x53425355 T 0x3fcc4 R 78 Stat 0x0
[66871.480919] -- Result from auto-sense is 0
[66871.480921] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66871.480926] Not Ready: Medium not present
[66871.480932] scsi cmd done, result=0x2
[66871.480940] *** thread sleeping
[66871.481024] *** thread awakened
[66871.481029] Command TEST_UNIT_READY (6 bytes)
[66871.481034] bytes: 00 00 00 00 00 00
[66871.481040] Bulk Command S 0x43425355 T 0x3fcc5 L 0 F 0 Trg 0 LUN 2 CL 6
[66871.481046] xfer 31 bytes
[66871.481169] Status code 0; transferred 31/31
[66871.481177] -- transfer complete
[66871.481179] Bulk command transfer result=0
[66871.481182] Attempting to get CSW...
[66871.481184] xfer 13 bytes
[66871.481384] Status code 0; transferred 13/13
[66871.481391] -- transfer complete
[66871.481393] Bulk status result = 0
[66871.481398] Bulk Status S 0x53425355 T 0x3fcc5 R 0 Stat 0x1
[66871.481403] -- transport indicates command failure
[66871.481406] Issuing auto-REQUEST_SENSE
[66871.481408] Bulk Command S 0x43425355 T 0x3fcc6 L 96 F 128 Trg 0 LUN 2 CL 6
[66871.481414] xfer 31 bytes
[66871.481518] Status code 0; transferred 31/31
[66871.481527] -- transfer complete
[66871.481530] Bulk command transfer result=0
[66871.481532] xfer 96 bytes, 1 entries
[66871.481681] Status code -121; transferred 18/96
[66871.481688] -- short read transfer
[66871.481691] Bulk data transfer result 0x1
[66871.481694] Attempting to get CSW...
[66871.481696] xfer 13 bytes
[66871.481834] Status code -32; transferred 0/13
[66871.481838] clearing endpoint halt for pipe 0xc0008380
[66871.481841] rq=01 rqtype=02 value=0000 index=81 len=0
[66871.482185] result = 0
[66871.482187] Attempting to get CSW (2nd try)...
[66871.482189] xfer 13 bytes
[66871.482237] Status code 0; transferred 13/13
[66871.482240] -- transfer complete
[66871.482242] Bulk status result = 0
[66871.482244] Bulk Status S 0x53425355 T 0x3fcc6 R 78 Stat 0x0
[66871.482250] -- Result from auto-sense is 0
[66871.482252] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66871.482257] Not Ready: Medium not present
[66871.482263] scsi cmd done, result=0x2
[66871.482269] *** thread sleeping
[66871.543773] *** thread awakened
[66871.543780] Command TEST_UNIT_READY (6 bytes)
[66871.543785] bytes: 00 00 00 00 00 00
[66871.543789] Bulk Command S 0x43425355 T 0x3fcc7 L 0 F 0 Trg 0 LUN 1 CL 6
[66871.543796] xfer 31 bytes
[66871.543922] Status code 0; transferred 31/31
[66871.543930] -- transfer complete
[66871.543932] Bulk command transfer result=0
[66871.543935] Attempting to get CSW...
[66871.543936] xfer 13 bytes
[66871.544125] Status code 0; transferred 13/13
[66871.544129] -- transfer complete
[66871.544130] Bulk status result = 0
[66871.544133] Bulk Status S 0x53425355 T 0x3fcc7 R 0 Stat 0x1
[66871.544138] -- transport indicates command failure
[66871.544140] Issuing auto-REQUEST_SENSE
[66871.544143] Bulk Command S 0x43425355 T 0x3fcc8 L 96 F 128 Trg 0 LUN 1 CL 6
[66871.544149] xfer 31 bytes
[66871.544222] Status code 0; transferred 31/31
[66871.544225] -- transfer complete
[66871.544227] Bulk command transfer result=0
[66871.544230] xfer 96 bytes, 1 entries
[66871.544357] Status code -121; transferred 18/96
[66871.544360] -- short read transfer
[66871.544362] Bulk data transfer result 0x1
[66871.544365] Attempting to get CSW...
[66871.544367] xfer 13 bytes
[66871.544532] Status code -32; transferred 0/13
[66871.544536] clearing endpoint halt for pipe 0xc0008380
[66871.544539] rq=01 rqtype=02 value=0000 index=81 len=0
[66871.544942] result = 0
[66871.544948] Attempting to get CSW (2nd try)...
[66871.544951] xfer 13 bytes
[66871.545074] Status code 0; transferred 13/13
[66871.545081] -- transfer complete
[66871.545083] Bulk status result = 0
[66871.545088] Bulk Status S 0x53425355 T 0x3fcc8 R 78 Stat 0x0
[66871.545094] -- Result from auto-sense is 0
[66871.545096] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66871.545102] Not Ready: Medium not present
[66871.545106] scsi cmd done, result=0x2
[66871.545114] *** thread sleeping
[66871.545198] *** thread awakened
[66871.545203] Command TEST_UNIT_READY (6 bytes)
[66871.545208] bytes: 00 00 00 00 00 00
[66871.545212] Bulk Command S 0x43425355 T 0x3fcc9 L 0 F 0 Trg 0 LUN 3 CL 6
[66871.545218] xfer 31 bytes
[66871.545332] Status code 0; transferred 31/31
[66871.545339] -- transfer complete
[66871.545341] Bulk command transfer result=0
[66871.545346] Attempting to get CSW...
[66871.545349] xfer 13 bytes
[66871.545579] Status code 0; transferred 13/13
[66871.545586] -- transfer complete
[66871.545588] Bulk status result = 0
[66871.545591] Bulk Status S 0x53425355 T 0x3fcc9 R 0 Stat 0x1
[66871.545597] -- transport indicates command failure
[66871.545599] Issuing auto-REQUEST_SENSE
[66871.545601] Bulk Command S 0x43425355 T 0x3fcca L 96 F 128 Trg 0 LUN 3 CL 6
[66871.545608] xfer 31 bytes
[66871.545711] Status code 0; transferred 31/31
[66871.545718] -- transfer complete
[66871.545720] Bulk command transfer result=0
[66871.545723] xfer 96 bytes, 1 entries
[66871.545850] Status code -121; transferred 18/96
[66871.545858] -- short read transfer
[66871.545860] Bulk data transfer result 0x1
[66871.545863] Attempting to get CSW...
[66871.545865] xfer 13 bytes
[66871.546004] Status code -32; transferred 0/13
[66871.546008] clearing endpoint halt for pipe 0xc0008380
[66871.546011] rq=01 rqtype=02 value=0000 index=81 len=0
[66871.546374] result = 0
[66871.546380] Attempting to get CSW (2nd try)...
[66871.546382] xfer 13 bytes
[66871.546468] Status code 0; transferred 13/13
[66871.546476] -- transfer complete
[66871.546479] Bulk status result = 0
[66871.546482] Bulk Status S 0x53425355 T 0x3fcca R 78 Stat 0x0
[66871.546487] -- Result from auto-sense is 0
[66871.546490] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66871.546495] Not Ready: Medium not present
[66871.546501] scsi cmd done, result=0x2
[66871.546508] *** thread sleeping
[66873.527765] *** thread awakened
[66873.527771] Command TEST_UNIT_READY (6 bytes)
[66873.527776] bytes: 00 00 00 00 00 00
[66873.527780] Bulk Command S 0x43425355 T 0x3fccb L 0 F 0 Trg 0 LUN 2 CL 6
[66873.527787] xfer 31 bytes
[66873.527916] Status code 0; transferred 31/31
[66873.527923] -- transfer complete
[66873.527926] Bulk command transfer result=0
[66873.527928] Attempting to get CSW...
[66873.527930] xfer 13 bytes
[66873.528087] Status code 0; transferred 13/13
[66873.528091] -- transfer complete
[66873.528093] Bulk status result = 0
[66873.528095] Bulk Status S 0x53425355 T 0x3fccb R 0 Stat 0x1
[66873.528101] -- transport indicates command failure
[66873.528103] Issuing auto-REQUEST_SENSE
[66873.528105] Bulk Command S 0x43425355 T 0x3fccc L 96 F 128 Trg 0 LUN 2 CL 6
[66873.528112] xfer 31 bytes
[66873.528184] Status code 0; transferred 31/31
[66873.528188] -- transfer complete
[66873.528190] Bulk command transfer result=0
[66873.528192] xfer 96 bytes, 1 entries
[66873.528346] Status code -121; transferred 18/96
[66873.528350] -- short read transfer
[66873.528352] Bulk data transfer result 0x1
[66873.528354] Attempting to get CSW...
[66873.528356] xfer 13 bytes
[66873.528516] Status code -32; transferred 0/13
[66873.528519] clearing endpoint halt for pipe 0xc0008380
[66873.528522] rq=01 rqtype=02 value=0000 index=81 len=0
[66873.528928] result = 0
[66873.528934] Attempting to get CSW (2nd try)...
[66873.528936] xfer 13 bytes
[66873.529041] Status code 0; transferred 13/13
[66873.529049] -- transfer complete
[66873.529051] Bulk status result = 0
[66873.529054] Bulk Status S 0x53425355 T 0x3fccc R 78 Stat 0x0
[66873.529060] -- Result from auto-sense is 0
[66873.529062] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66873.529068] Not Ready: Medium not present
[66873.529072] scsi cmd done, result=0x2
[66873.529080] *** thread sleeping
[66873.529130] *** thread awakened
[66873.529134] Command TEST_UNIT_READY (6 bytes)
[66873.529137] bytes: 00 00 00 00 00 00
[66873.529141] Bulk Command S 0x43425355 T 0x3fccd L 0 F 0 Trg 0 LUN 0 CL 6
[66873.529148] xfer 31 bytes
[66873.529262] Status code 0; transferred 31/31
[66873.529269] -- transfer complete
[66873.529271] Bulk command transfer result=0
[66873.529274] Attempting to get CSW...
[66873.529276] xfer 13 bytes
[66873.529405] Status code 0; transferred 13/13
[66873.529412] -- transfer complete
[66873.529415] Bulk status result = 0
[66873.529417] Bulk Status S 0x53425355 T 0x3fccd R 0 Stat 0x1
[66873.529423] -- transport indicates command failure
[66873.529425] Issuing auto-REQUEST_SENSE
[66873.529427] Bulk Command S 0x43425355 T 0x3fcce L 96 F 128 Trg 0 LUN 0 CL 6
[66873.529434] xfer 31 bytes
[66873.529558] Status code 0; transferred 31/31
[66873.529577] -- transfer complete
[66873.529579] Bulk command transfer result=0
[66873.529581] xfer 96 bytes, 1 entries
[66873.529649] Status code -121; transferred 18/96
[66873.529653] -- short read transfer
[66873.529656] Bulk data transfer result 0x1
[66873.529658] Attempting to get CSW...
[66873.529660] xfer 13 bytes
[66873.529817] Status code -32; transferred 0/13
[66873.529821] clearing endpoint halt for pipe 0xc0008380
[66873.529824] rq=01 rqtype=02 value=0000 index=81 len=0
[66873.530177] result = 0
[66873.530179] Attempting to get CSW (2nd try)...
[66873.530181] xfer 13 bytes
[66873.530236] Status code 0; transferred 13/13
[66873.530240] -- transfer complete
[66873.530242] Bulk status result = 0
[66873.530244] Bulk Status S 0x53425355 T 0x3fcce R 78 Stat 0x0
[66873.530250] -- Result from auto-sense is 0
[66873.530252] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66873.530257] Not Ready: Medium not present
[66873.530261] scsi cmd done, result=0x2
[66873.530267] *** thread sleeping
[66873.591785] *** thread awakened
[66873.591791] Command TEST_UNIT_READY (6 bytes)
[66873.591796] bytes: 00 00 00 00 00 00
[66873.591800] Bulk Command S 0x43425355 T 0x3fccf L 0 F 0 Trg 0 LUN 1 CL 6
[66873.591807] xfer 31 bytes
[66873.591876] Status code 0; transferred 31/31
[66873.591880] -- transfer complete
[66873.591882] Bulk command transfer result=0
[66873.591884] Attempting to get CSW...
[66873.591886] xfer 13 bytes
[66873.592242] Status code 0; transferred 13/13
[66873.592245] -- transfer complete
[66873.592247] Bulk status result = 0
[66873.592249] Bulk Status S 0x53425355 T 0x3fccf R 0 Stat 0x1
[66873.592254] -- transport indicates command failure
[66873.592256] Issuing auto-REQUEST_SENSE
[66873.592258] Bulk Command S 0x43425355 T 0x3fcd0 L 96 F 128 Trg 0 LUN 1 CL 6
[66873.592264] xfer 31 bytes
[66873.592327] Status code 0; transferred 31/31
[66873.592330] -- transfer complete
[66873.592332] Bulk command transfer result=0
[66873.592334] xfer 96 bytes, 1 entries
[66873.592471] Status code -121; transferred 18/96
[66873.592474] -- short read transfer
[66873.592476] Bulk data transfer result 0x1
[66873.592479] Attempting to get CSW...
[66873.592480] xfer 13 bytes
[66873.592686] Status code -32; transferred 0/13
[66873.592693] clearing endpoint halt for pipe 0xc0008380
[66873.592696] rq=01 rqtype=02 value=0000 index=81 len=0
[66873.593099] result = 0
[66873.593105] Attempting to get CSW (2nd try)...
[66873.593108] xfer 13 bytes
[66873.593213] Status code 0; transferred 13/13
[66873.593220] -- transfer complete
[66873.593222] Bulk status result = 0
[66873.593225] Bulk Status S 0x53425355 T 0x3fcd0 R 78 Stat 0x0
[66873.593231] -- Result from auto-sense is 0
[66873.593233] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66873.593239] Not Ready: Medium not present
[66873.593243] scsi cmd done, result=0x2
[66873.593251] *** thread sleeping
[66873.593341] *** thread awakened
[66873.593346] Command TEST_UNIT_READY (6 bytes)
[66873.593351] bytes: 00 00 00 00 00 00
[66873.593355] Bulk Command S 0x43425355 T 0x3fcd1 L 0 F 0 Trg 0 LUN 3 CL 6
[66873.593361] xfer 31 bytes
[66873.593469] Status code 0; transferred 31/31
[66873.593476] -- transfer complete
[66873.593479] Bulk command transfer result=0
[66873.593483] Attempting to get CSW...
[66873.593485] xfer 13 bytes
[66873.593718] Status code 0; transferred 13/13
[66873.593725] -- transfer complete
[66873.593728] Bulk status result = 0
[66873.593731] Bulk Status S 0x53425355 T 0x3fcd1 R 0 Stat 0x1
[66873.593736] -- transport indicates command failure
[66873.593738] Issuing auto-REQUEST_SENSE
[66873.593741] Bulk Command S 0x43425355 T 0x3fcd2 L 96 F 128 Trg 0 LUN 3 CL 6
[66873.593747] xfer 31 bytes
[66873.593811] Status code 0; transferred 31/31
[66873.593815] -- transfer complete
[66873.593817] Bulk command transfer result=0
[66873.593820] xfer 96 bytes, 1 entries
[66873.593945] Status code -121; transferred 18/96
[66873.593949] -- short read transfer
[66873.593951] Bulk data transfer result 0x1
[66873.593954] Attempting to get CSW...
[66873.593956] xfer 13 bytes
[66873.594154] Status code -32; transferred 0/13
[66873.594161] clearing endpoint halt for pipe 0xc0008380
[66873.594165] rq=01 rqtype=02 value=0000 index=81 len=0
[66873.594537] result = 0
[66873.594543] Attempting to get CSW (2nd try)...
[66873.594545] xfer 13 bytes
[66873.594633] Status code 0; transferred 13/13
[66873.594640] -- transfer complete
[66873.594642] Bulk status result = 0
[66873.594645] Bulk Status S 0x53425355 T 0x3fcd2 R 78 Stat 0x0
[66873.594651] -- Result from auto-sense is 0
[66873.594653] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66873.594659] Not Ready: Medium not present
[66873.594663] scsi cmd done, result=0x2
[66873.594670] *** thread sleeping
[66875.575657] *** thread awakened
[66875.575664] Command TEST_UNIT_READY (6 bytes)
[66875.575668] bytes: 00 00 00 00 00 00
[66875.575673] Bulk Command S 0x43425355 T 0x3fcd3 L 0 F 0 Trg 0 LUN 0 CL 6
[66875.575679] xfer 31 bytes
[66875.575808] Status code 0; transferred 31/31
[66875.575815] -- transfer complete
[66875.575817] Bulk command transfer result=0
[66875.575820] Attempting to get CSW...
[66875.575822] xfer 13 bytes
[66875.575895] Status code 0; transferred 13/13
[66875.575898] -- transfer complete
[66875.575900] Bulk status result = 0
[66875.575902] Bulk Status S 0x53425355 T 0x3fcd3 R 0 Stat 0x1
[66875.575908] -- transport indicates command failure
[66875.575910] Issuing auto-REQUEST_SENSE
[66875.575912] Bulk Command S 0x43425355 T 0x3fcd4 L 96 F 128 Trg 0 LUN 0 CL 6
[66875.575919] xfer 31 bytes
[66875.575994] Status code 0; transferred 31/31
[66875.575997] -- transfer complete
[66875.575999] Bulk command transfer result=0
[66875.576002] xfer 96 bytes, 1 entries
[66875.576127] Status code -121; transferred 18/96
[66875.576131] -- short read transfer
[66875.576133] Bulk data transfer result 0x1
[66875.576135] Attempting to get CSW...
[66875.576137] xfer 13 bytes
[66875.576314] Status code -32; transferred 0/13
[66875.576318] clearing endpoint halt for pipe 0xc0008380
[66875.576321] rq=01 rqtype=02 value=0000 index=81 len=0
[66875.576709] result = 0
[66875.576715] Attempting to get CSW (2nd try)...
[66875.576717] xfer 13 bytes
[66875.576840] Status code 0; transferred 13/13
[66875.576847] -- transfer complete
[66875.576849] Bulk status result = 0
[66875.576852] Bulk Status S 0x53425355 T 0x3fcd4 R 78 Stat 0x0
[66875.576858] -- Result from auto-sense is 0
[66875.576860] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66875.576866] Not Ready: Medium not present
[66875.576871] scsi cmd done, result=0x2
[66875.576878] *** thread sleeping
[66875.576929] *** thread awakened
[66875.576932] Command TEST_UNIT_READY (6 bytes)
[66875.576936] bytes: 00 00 00 00 00 00
[66875.576940] Bulk Command S 0x43425355 T 0x3fcd5 L 0 F 0 Trg 0 LUN 2 CL 6
[66875.576946] xfer 31 bytes
[66875.577071] Status code 0; transferred 31/31
[66875.577078] -- transfer complete
[66875.577080] Bulk command transfer result=0
[66875.577083] Attempting to get CSW...
[66875.577085] xfer 13 bytes
[66875.577284] Status code 0; transferred 13/13
[66875.577291] -- transfer complete
[66875.577293] Bulk status result = 0
[66875.577296] Bulk Status S 0x53425355 T 0x3fcd5 R 0 Stat 0x1
[66875.577301] -- transport indicates command failure
[66875.577303] Issuing auto-REQUEST_SENSE
[66875.577306] Bulk Command S 0x43425355 T 0x3fcd6 L 96 F 128 Trg 0 LUN 2 CL 6
[66875.577312] xfer 31 bytes
[66875.577435] Status code 0; transferred 31/31
[66875.577442] -- transfer complete
[66875.577445] Bulk command transfer result=0
[66875.577449] xfer 96 bytes, 1 entries
[66875.577600] Status code -121; transferred 18/96
[66875.577607] -- short read transfer
[66875.577610] Bulk data transfer result 0x1
[66875.577615] Attempting to get CSW...
[66875.577617] xfer 13 bytes
[66875.577774] Status code -32; transferred 0/13
[66875.577778] clearing endpoint halt for pipe 0xc0008380
[66875.577781] rq=01 rqtype=02 value=0000 index=81 len=0
[66875.578136] result = 0
[66875.578139] Attempting to get CSW (2nd try)...
[66875.578141] xfer 13 bytes
[66875.578247] Status code 0; transferred 13/13
[66875.578254] -- transfer complete
[66875.578257] Bulk status result = 0
[66875.578259] Bulk Status S 0x53425355 T 0x3fcd6 R 78 Stat 0x0
[66875.578265] -- Result from auto-sense is 0
[66875.578267] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66875.578272] Not Ready: Medium not present
[66875.578276] scsi cmd done, result=0x2
[66875.578285] *** thread sleeping
[66875.639839] *** thread awakened
[66875.639845] Command TEST_UNIT_READY (6 bytes)
[66875.639850] bytes: 00 00 00 00 00 00
[66875.639854] Bulk Command S 0x43425355 T 0x3fcd7 L 0 F 0 Trg 0 LUN 1 CL 6
[66875.639861] xfer 31 bytes
[66875.639927] Status code 0; transferred 31/31
[66875.639931] -- transfer complete
[66875.639933] Bulk command transfer result=0
[66875.639936] Attempting to get CSW...
[66875.639938] xfer 13 bytes
[66875.640319] Status code 0; transferred 13/13
[66875.640322] -- transfer complete
[66875.640324] Bulk status result = 0
[66875.640326] Bulk Status S 0x53425355 T 0x3fcd7 R 0 Stat 0x1
[66875.640331] -- transport indicates command failure
[66875.640333] Issuing auto-REQUEST_SENSE
[66875.640335] Bulk Command S 0x43425355 T 0x3fcd8 L 96 F 128 Trg 0 LUN 1 CL 6
[66875.640341] xfer 31 bytes
[66875.640395] Status code 0; transferred 31/31
[66875.640398] -- transfer complete
[66875.640400] Bulk command transfer result=0
[66875.640402] xfer 96 bytes, 1 entries
[66875.640528] Status code -121; transferred 18/96
[66875.640531] -- short read transfer
[66875.640533] Bulk data transfer result 0x1
[66875.640536] Attempting to get CSW...
[66875.640538] xfer 13 bytes
[66875.640730] Status code -32; transferred 0/13
[66875.640741] clearing endpoint halt for pipe 0xc0008380
[66875.640744] rq=01 rqtype=02 value=0000 index=81 len=0
[66875.641151] result = 0
[66875.641157] Attempting to get CSW (2nd try)...
[66875.641159] xfer 13 bytes
[66875.641283] Status code 0; transferred 13/13
[66875.641290] -- transfer complete
[66875.641292] Bulk status result = 0
[66875.641295] Bulk Status S 0x53425355 T 0x3fcd8 R 78 Stat 0x0
[66875.641301] -- Result from auto-sense is 0
[66875.641303] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66875.641309] Not Ready: Medium not present
[66875.641313] scsi cmd done, result=0x2
[66875.641321] *** thread sleeping
[66875.641407] *** thread awakened
[66875.641412] Command TEST_UNIT_READY (6 bytes)
[66875.641417] bytes: 00 00 00 00 00 00
[66875.641420] Bulk Command S 0x43425355 T 0x3fcd9 L 0 F 0 Trg 0 LUN 3 CL 6
[66875.641427] xfer 31 bytes
[66875.641551] Status code 0; transferred 31/31
[66875.641558] -- transfer complete
[66875.641560] Bulk command transfer result=0
[66875.641563] Attempting to get CSW...
[66875.641575] xfer 13 bytes
[66875.641755] Status code 0; transferred 13/13
[66875.641759] -- transfer complete
[66875.641760] Bulk status result = 0
[66875.641763] Bulk Status S 0x53425355 T 0x3fcd9 R 0 Stat 0x1
[66875.641768] -- transport indicates command failure
[66875.641770] Issuing auto-REQUEST_SENSE
[66875.641773] Bulk Command S 0x43425355 T 0x3fcda L 96 F 128 Trg 0 LUN 3 CL 6
[66875.641779] xfer 31 bytes
[66875.641904] Status code 0; transferred 31/31
[66875.641911] -- transfer complete
[66875.641913] Bulk command transfer result=0
[66875.641916] xfer 96 bytes, 1 entries
[66875.641993] Status code -121; transferred 18/96
[66875.641997] -- short read transfer
[66875.641999] Bulk data transfer result 0x1
[66875.642001] Attempting to get CSW...
[66875.642003] xfer 13 bytes
[66875.642180] Status code -32; transferred 0/13
[66875.642183] clearing endpoint halt for pipe 0xc0008380
[66875.642186] rq=01 rqtype=02 value=0000 index=81 len=0
[66875.642579] result = 0
[66875.642585] Attempting to get CSW (2nd try)...
[66875.642587] xfer 13 bytes
[66875.642696] Status code 0; transferred 13/13
[66875.642703] -- transfer complete
[66875.642705] Bulk status result = 0
[66875.642708] Bulk Status S 0x53425355 T 0x3fcda R 78 Stat 0x0
[66875.642713] -- Result from auto-sense is 0
[66875.642716] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66875.642721] Not Ready: Medium not present
[66875.642725] scsi cmd done, result=0x2
[66875.642732] *** thread sleeping
[66877.623731] *** thread awakened
[66877.623737] Command TEST_UNIT_READY (6 bytes)
[66877.623742] bytes: 00 00 00 00 00 00
[66877.623746] Bulk Command S 0x43425355 T 0x3fcdb L 0 F 0 Trg 0 LUN 2 CL 6
[66877.623753] xfer 31 bytes
[66877.623862] Status code 0; transferred 31/31
[66877.623870] -- transfer complete
[66877.623872] Bulk command transfer result=0
[66877.623875] Attempting to get CSW...
[66877.623877] xfer 13 bytes
[66877.624110] Status code 0; transferred 13/13
[66877.624117] -- transfer complete
[66877.624120] Bulk status result = 0
[66877.624122] Bulk Status S 0x53425355 T 0x3fcdb R 0 Stat 0x1
[66877.624128] -- transport indicates command failure
[66877.624131] Issuing auto-REQUEST_SENSE
[66877.624133] Bulk Command S 0x43425355 T 0x3fcdc L 96 F 128 Trg 0 LUN 2 CL 6
[66877.624140] xfer 31 bytes
[66877.624207] Status code 0; transferred 31/31
[66877.624211] -- transfer complete
[66877.624212] Bulk command transfer result=0
[66877.624215] xfer 96 bytes, 1 entries
[66877.624362] Status code -121; transferred 18/96
[66877.624366] -- short read transfer
[66877.624367] Bulk data transfer result 0x1
[66877.624370] Attempting to get CSW...
[66877.624372] xfer 13 bytes
[66877.624512] Status code -32; transferred 0/13
[66877.624515] clearing endpoint halt for pipe 0xc0008380
[66877.624518] rq=01 rqtype=02 value=0000 index=81 len=0
[66877.624880] result = 0
[66877.624885] Attempting to get CSW (2nd try)...
[66877.624888] xfer 13 bytes
[66877.624965] Status code 0; transferred 13/13
[66877.624972] -- transfer complete
[66877.624975] Bulk status result = 0
[66877.624978] Bulk Status S 0x53425355 T 0x3fcdc R 78 Stat 0x0
[66877.624983] -- Result from auto-sense is 0
[66877.624986] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66877.624991] Not Ready: Medium not present
[66877.624996] scsi cmd done, result=0x2
[66877.625006] *** thread sleeping
[66877.625150] *** thread awakened
[66877.625156] Command TEST_UNIT_READY (6 bytes)
[66877.625161] bytes: 00 00 00 00 00 00
[66877.625165] Bulk Command S 0x43425355 T 0x3fcdd L 0 F 0 Trg 0 LUN 0 CL 6
[66877.625172] xfer 31 bytes
[66877.625196] Status code 0; transferred 31/31
[66877.625200] -- transfer complete
[66877.625202] Bulk command transfer result=0
[66877.625204] Attempting to get CSW...
[66877.625206] xfer 13 bytes
[66877.625357] Status code 0; transferred 13/13
[66877.625364] -- transfer complete
[66877.625366] Bulk status result = 0
[66877.625369] Bulk Status S 0x53425355 T 0x3fcdd R 0 Stat 0x1
[66877.625374] -- transport indicates command failure
[66877.625377] Issuing auto-REQUEST_SENSE
[66877.625380] Bulk Command S 0x43425355 T 0x3fcde L 96 F 128 Trg 0 LUN 0 CL 6
[66877.625386] xfer 31 bytes
[66877.625415] Status code 0; transferred 31/31
[66877.625419] -- transfer complete
[66877.625421] Bulk command transfer result=0
[66877.625423] xfer 96 bytes, 1 entries
[66877.625589] Status code -121; transferred 18/96
[66877.625597] -- short read transfer
[66877.625599] Bulk data transfer result 0x1
[66877.625602] Attempting to get CSW...
[66877.625604] xfer 13 bytes
[66877.625741] Status code -32; transferred 0/13
[66877.625748] clearing endpoint halt for pipe 0xc0008380
[66877.625751] rq=01 rqtype=02 value=0000 index=81 len=0
[66877.626112] result = 0
[66877.626118] Attempting to get CSW (2nd try)...
[66877.626120] xfer 13 bytes
[66877.626149] Status code 0; transferred 13/13
[66877.626153] -- transfer complete
[66877.626155] Bulk status result = 0
[66877.626158] Bulk Status S 0x53425355 T 0x3fcde R 78 Stat 0x0
[66877.626164] -- Result from auto-sense is 0
[66877.626166] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66877.626171] Not Ready: Medium not present
[66877.626175] scsi cmd done, result=0x2
[66877.626182] *** thread sleeping
[66877.687776] *** thread awakened
[66877.687783] Command TEST_UNIT_READY (6 bytes)
[66877.687787] bytes: 00 00 00 00 00 00
[66877.687792] Bulk Command S 0x43425355 T 0x3fcdf L 0 F 0 Trg 0 LUN 1 CL 6
[66877.687799] xfer 31 bytes
[66877.687894] Status code 0; transferred 31/31
[66877.687902] -- transfer complete
[66877.687904] Bulk command transfer result=0
[66877.687907] Attempting to get CSW...
[66877.687909] xfer 13 bytes
[66877.688288] Status code 0; transferred 13/13
[66877.688296] -- transfer complete
[66877.688298] Bulk status result = 0
[66877.688301] Bulk Status S 0x53425355 T 0x3fcdf R 0 Stat 0x1
[66877.688307] -- transport indicates command failure
[66877.688309] Issuing auto-REQUEST_SENSE
[66877.688312] Bulk Command S 0x43425355 T 0x3fce0 L 96 F 128 Trg 0 LUN 1 CL 6
[66877.688319] xfer 31 bytes
[66877.688379] Status code 0; transferred 31/31
[66877.688383] -- transfer complete
[66877.688385] Bulk command transfer result=0
[66877.688387] xfer 96 bytes, 1 entries
[66877.688509] Status code -121; transferred 18/96
[66877.688513] -- short read transfer
[66877.688514] Bulk data transfer result 0x1
[66877.688517] Attempting to get CSW...
[66877.688519] xfer 13 bytes
[66877.688666] Status code -32; transferred 0/13
[66877.688673] clearing endpoint halt for pipe 0xc0008380
[66877.688677] rq=01 rqtype=02 value=0000 index=81 len=0
[66877.689035] result = 0
[66877.689041] Attempting to get CSW (2nd try)...
[66877.689044] xfer 13 bytes
[66877.689073] Status code 0; transferred 13/13
[66877.689077] -- transfer complete
[66877.689080] Bulk status result = 0
[66877.689083] Bulk Status S 0x53425355 T 0x3fce0 R 78 Stat 0x0
[66877.689088] -- Result from auto-sense is 0
[66877.689091] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66877.689096] Not Ready: Medium not present
[66877.689101] scsi cmd done, result=0x2
[66877.689108] *** thread sleeping
[66877.689254] *** thread awakened
[66877.689261] Command TEST_UNIT_READY (6 bytes)
[66877.689265] bytes: 00 00 00 00 00 00
[66877.689270] Bulk Command S 0x43425355 T 0x3fce1 L 0 F 0 Trg 0 LUN 3 CL 6
[66877.689276] xfer 31 bytes
[66877.689318] Status code 0; transferred 31/31
[66877.689323] -- transfer complete
[66877.689325] Bulk command transfer result=0
[66877.689327] Attempting to get CSW...
[66877.689329] xfer 13 bytes
[66877.689558] Status code 0; transferred 13/13
[66877.689561] -- transfer complete
[66877.689574] Bulk status result = 0
[66877.689577] Bulk Status S 0x53425355 T 0x3fce1 R 0 Stat 0x1
[66877.689582] -- transport indicates command failure
[66877.689584] Issuing auto-REQUEST_SENSE
[66877.689586] Bulk Command S 0x43425355 T 0x3fce2 L 96 F 128 Trg 0 LUN 3 CL 6
[66877.689592] xfer 31 bytes
[66877.689624] Status code 0; transferred 31/31
[66877.689627] -- transfer complete
[66877.689629] Bulk command transfer result=0
[66877.689631] xfer 96 bytes, 1 entries
[66877.689743] Status code -121; transferred 18/96
[66877.689747] -- short read transfer
[66877.689749] Bulk data transfer result 0x1
[66877.689751] Attempting to get CSW...
[66877.689753] xfer 13 bytes
[66877.689894] Status code -32; transferred 0/13
[66877.689902] clearing endpoint halt for pipe 0xc0008380
[66877.689905] rq=01 rqtype=02 value=0000 index=81 len=0
[66877.690240] result = 0
[66877.690246] Attempting to get CSW (2nd try)...
[66877.690248] xfer 13 bytes
[66877.690272] Status code 0; transferred 13/13
[66877.690277] -- transfer complete
[66877.690279] Bulk status result = 0
[66877.690281] Bulk Status S 0x53425355 T 0x3fce2 R 78 Stat 0x0
[66877.690287] -- Result from auto-sense is 0
[66877.690289] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66877.690295] Not Ready: Medium not present
[66877.690299] scsi cmd done, result=0x2
[66877.690307] *** thread sleeping
[66879.671674] *** thread awakened
[66879.671680] Command TEST_UNIT_READY (6 bytes)
[66879.671684] bytes: 00 00 00 00 00 00
[66879.671689] Bulk Command S 0x43425355 T 0x3fce3 L 0 F 0 Trg 0 LUN 0 CL 6
[66879.671696] xfer 31 bytes
[66879.671790] Status code 0; transferred 31/31
[66879.671797] -- transfer complete
[66879.671799] Bulk command transfer result=0
[66879.671802] Attempting to get CSW...
[66879.671804] xfer 13 bytes
[66879.671889] Status code 0; transferred 13/13
[66879.671896] -- transfer complete
[66879.671898] Bulk status result = 0
[66879.671901] Bulk Status S 0x53425355 T 0x3fce3 R 0 Stat 0x1
[66879.671906] -- transport indicates command failure
[66879.671909] Issuing auto-REQUEST_SENSE
[66879.671911] Bulk Command S 0x43425355 T 0x3fce4 L 96 F 128 Trg 0 LUN 0 CL 6
[66879.671917] xfer 31 bytes
[66879.671976] Status code 0; transferred 31/31
[66879.671980] -- transfer complete
[66879.671982] Bulk command transfer result=0
[66879.671984] xfer 96 bytes, 1 entries
[66879.672111] Status code -121; transferred 18/96
[66879.672115] -- short read transfer
[66879.672117] Bulk data transfer result 0x1
[66879.672119] Attempting to get CSW...
[66879.672121] xfer 13 bytes
[66879.672266] Status code -32; transferred 0/13
[66879.672270] clearing endpoint halt for pipe 0xc0008380
[66879.672272] rq=01 rqtype=02 value=0000 index=81 len=0
[66879.672621] result = 0
[66879.672624] Attempting to get CSW (2nd try)...
[66879.672626] xfer 13 bytes
[66879.672655] Status code 0; transferred 13/13
[66879.672660] -- transfer complete
[66879.672662] Bulk status result = 0
[66879.672664] Bulk Status S 0x53425355 T 0x3fce4 R 78 Stat 0x0
[66879.672669] -- Result from auto-sense is 0
[66879.672672] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66879.672677] Not Ready: Medium not present
[66879.672682] scsi cmd done, result=0x2
[66879.672688] *** thread sleeping
[66879.672767] *** thread awakened
[66879.672769] Command TEST_UNIT_READY (6 bytes)
[66879.672773] bytes: 00 00 00 00 00 00
[66879.672777] Bulk Command S 0x43425355 T 0x3fce5 L 0 F 0 Trg 0 LUN 2 CL 6
[66879.672782] xfer 31 bytes
[66879.672806] Status code 0; transferred 31/31
[66879.672809] -- transfer complete
[66879.672811] Bulk command transfer result=0
[66879.672813] Attempting to get CSW...
[66879.672815] xfer 13 bytes
[66879.673034] Status code 0; transferred 13/13
[66879.673037] -- transfer complete
[66879.673040] Bulk status result = 0
[66879.673042] Bulk Status S 0x53425355 T 0x3fce5 R 0 Stat 0x1
[66879.673046] -- transport indicates command failure
[66879.673048] Issuing auto-REQUEST_SENSE
[66879.673050] Bulk Command S 0x43425355 T 0x3fce6 L 96 F 128 Trg 0 LUN 2 CL 6
[66879.673055] xfer 31 bytes
[66879.673074] Status code 0; transferred 31/31
[66879.673077] -- transfer complete
[66879.673079] Bulk command transfer result=0
[66879.673081] xfer 96 bytes, 1 entries
[66879.673244] Status code -121; transferred 18/96
[66879.673247] -- short read transfer
[66879.673249] Bulk data transfer result 0x1
[66879.673251] Attempting to get CSW...
[66879.673253] xfer 13 bytes
[66879.673362] Status code -32; transferred 0/13
[66879.673365] clearing endpoint halt for pipe 0xc0008380
[66879.673367] rq=01 rqtype=02 value=0000 index=81 len=0
[66879.673726] result = 0
[66879.673732] Attempting to get CSW (2nd try)...
[66879.673735] xfer 13 bytes
[66879.673761] Status code 0; transferred 13/13
[66879.673766] -- transfer complete
[66879.673768] Bulk status result = 0
[66879.673770] Bulk Status S 0x53425355 T 0x3fce6 R 78 Stat 0x0
[66879.673776] -- Result from auto-sense is 0
[66879.673778] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66879.673783] Not Ready: Medium not present
[66879.673788] scsi cmd done, result=0x2
[66879.673794] *** thread sleeping
[66879.735807] *** thread awakened
[66879.735814] Command TEST_UNIT_READY (6 bytes)
[66879.735818] bytes: 00 00 00 00 00 00
[66879.735823] Bulk Command S 0x43425355 T 0x3fce7 L 0 F 0 Trg 0 LUN 3 CL 6
[66879.735830] xfer 31 bytes
[66879.735896] Status code 0; transferred 31/31
[66879.735900] -- transfer complete
[66879.735902] Bulk command transfer result=0
[66879.735904] Attempting to get CSW...
[66879.735906] xfer 13 bytes
[66879.736030] Status code 0; transferred 13/13
[66879.736033] -- transfer complete
[66879.736035] Bulk status result = 0
[66879.736037] Bulk Status S 0x53425355 T 0x3fce7 R 0 Stat 0x1
[66879.736043] -- transport indicates command failure
[66879.736045] Issuing auto-REQUEST_SENSE
[66879.736047] Bulk Command S 0x43425355 T 0x3fce8 L 96 F 128 Trg 0 LUN 3 CL 6
[66879.736053] xfer 31 bytes
[66879.736107] Status code 0; transferred 31/31
[66879.736110] -- transfer complete
[66879.736112] Bulk command transfer result=0
[66879.736114] xfer 96 bytes, 1 entries
[66879.736263] Status code -121; transferred 18/96
[66879.736266] -- short read transfer
[66879.736268] Bulk data transfer result 0x1
[66879.736271] Attempting to get CSW...
[66879.736273] xfer 13 bytes
[66879.736440] Status code -32; transferred 0/13
[66879.736443] clearing endpoint halt for pipe 0xc0008380
[66879.736446] rq=01 rqtype=02 value=0000 index=81 len=0
[66879.736813] result = 0
[66879.736819] Attempting to get CSW (2nd try)...
[66879.736822] xfer 13 bytes
[66879.736850] Status code 0; transferred 13/13
[66879.736854] -- transfer complete
[66879.736856] Bulk status result = 0
[66879.736858] Bulk Status S 0x53425355 T 0x3fce8 R 78 Stat 0x0
[66879.736864] -- Result from auto-sense is 0
[66879.736867] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66879.736872] Not Ready: Medium not present
[66879.736877] scsi cmd done, result=0x2
[66879.736884] *** thread sleeping
[66879.737002] *** thread awakened
[66879.737007] Command TEST_UNIT_READY (6 bytes)
[66879.737012] bytes: 00 00 00 00 00 00
[66879.737015] Bulk Command S 0x43425355 T 0x3fce9 L 0 F 0 Trg 0 LUN 1 CL 6
[66879.737022] xfer 31 bytes
[66879.737046] Status code 0; transferred 31/31
[66879.737050] -- transfer complete
[66879.737052] Bulk command transfer result=0
[66879.737055] Attempting to get CSW...
[66879.737057] xfer 13 bytes
[66879.737451] Status code 0; transferred 13/13
[66879.737458] -- transfer complete
[66879.737461] Bulk status result = 0
[66879.737463] Bulk Status S 0x53425355 T 0x3fce9 R 0 Stat 0x1
[66879.737469] -- transport indicates command failure
[66879.737471] Issuing auto-REQUEST_SENSE
[66879.737473] Bulk Command S 0x43425355 T 0x3fcea L 96 F 128 Trg 0 LUN 1 CL 6
[66879.737479] xfer 31 bytes
[66879.737506] Status code 0; transferred 31/31
[66879.737510] -- transfer complete
[66879.737512] Bulk command transfer result=0
[66879.737515] xfer 96 bytes, 1 entries
[66879.737686] Status code -121; transferred 18/96
[66879.737694] -- short read transfer
[66879.737698] Bulk data transfer result 0x1
[66879.737701] Attempting to get CSW...
[66879.737702] xfer 13 bytes
[66879.737846] Status code -32; transferred 0/13
[66879.737855] clearing endpoint halt for pipe 0xc0008380
[66879.737858] rq=01 rqtype=02 value=0000 index=81 len=0
[66879.738216] result = 0
[66879.738222] Attempting to get CSW (2nd try)...
[66879.738224] xfer 13 bytes
[66879.738250] Status code 0; transferred 13/13
[66879.738254] -- transfer complete
[66879.738256] Bulk status result = 0
[66879.738259] Bulk Status S 0x53425355 T 0x3fcea R 78 Stat 0x0
[66879.738265] -- Result from auto-sense is 0
[66879.738267] -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
[66879.738272] Not Ready: Medium not present
[66879.738278] scsi cmd done, result=0x2
[66879.738285] *** thread sleeping